[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Re: [PATCH 4/5] virtio-net: Introduce a new bottom half pac
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] Re: [PATCH 4/5] virtio-net: Introduce a new bottom half packet TX |
Date: |
Tue, 31 Aug 2010 23:14:33 +0300 |
User-agent: |
Mutt/1.5.20 (2009-12-10) |
On Fri, Aug 27, 2010 at 04:37:36PM -0600, Alex Williamson wrote:
> Based on a patch from Mark McLoughlin, this patch introduces a new
> bottom half packet transmitter that avoids the latency imposed by
> the tx_timer approach. Rather than scheduling a timer when a TX
> packet comes in, schedule a bottom half to be run from the iothread.
> The bottom half handler first attempts to flush the queue with
> notification disabled (this is where we could race with a guest
> without txburst). If we flush a full burst, reschedule immediately.
> If we send short of a full burst, try to re-enable notification.
> To avoid a race with TXs that may have occurred, we must then
> flush again. If we find some packets to send, the guest it probably
> active, so we can reschedule again.
>
> tx_timer and tx_bh are mutually exclusive, so we can re-use the
> tx_waiting flag to indicate one or the other needs to be setup.
> This allows us to seamlessly migrate between timer and bh TX
> handling.
>
> Signed-off-by: Alex Williamson <address@hidden>
> ---
>
> hw/virtio-net.c | 81
> ++++++++++++++++++++++++++++++++++++++++++++++---------
> 1 files changed, 68 insertions(+), 13 deletions(-)
>
> diff --git a/hw/virtio-net.c b/hw/virtio-net.c
> index 8b652f2..3288c77 100644
> --- a/hw/virtio-net.c
> +++ b/hw/virtio-net.c
> @@ -36,6 +36,7 @@ typedef struct VirtIONet
> VirtQueue *ctrl_vq;
> NICState *nic;
> QEMUTimer *tx_timer;
> + QEMUBH *tx_bh;
> uint32_t tx_timeout;
> int32_t tx_burst;
> int tx_waiting;
> @@ -704,16 +705,25 @@ static void virtio_net_handle_tx(VirtIODevice *vdev,
> VirtQueue *vq)
> {
> VirtIONet *n = to_virtio_net(vdev);
>
> - if (n->tx_waiting) {
> - virtio_queue_set_notification(vq, 1);
> - qemu_del_timer(n->tx_timer);
> - n->tx_waiting = 0;
> - virtio_net_flush_tx(n, vq);
> + if (n->tx_timer) {
> + if (n->tx_waiting) {
> + virtio_queue_set_notification(vq, 1);
> + qemu_del_timer(n->tx_timer);
> + n->tx_waiting = 0;
> + virtio_net_flush_tx(n, vq);
> + } else {
> + qemu_mod_timer(n->tx_timer,
> + qemu_get_clock(vm_clock) + n->tx_timeout);
> + n->tx_waiting = 1;
> + virtio_queue_set_notification(vq, 0);
> + }
> } else {
> - qemu_mod_timer(n->tx_timer,
> - qemu_get_clock(vm_clock) + n->tx_timeout);
> + if (unlikely(n->tx_waiting)) {
> + return;
> + }
> + virtio_queue_set_notification(n->tx_vq, 0);
> + qemu_bh_schedule(n->tx_bh);
> n->tx_waiting = 1;
> - virtio_queue_set_notification(vq, 0);
> }
> }
>
> @@ -731,6 +741,41 @@ static void virtio_net_tx_timer(void *opaque)
> virtio_net_flush_tx(n, n->tx_vq);
> }
>
> +static void virtio_net_tx_bh(void *opaque)
> +{
> + VirtIONet *n = opaque;
> + int32_t ret;
> +
> + n->tx_waiting = 0;
> +
> + /* Just in case the driver is not ready on more */
> + if (unlikely(!(n->vdev.status & VIRTIO_CONFIG_S_DRIVER_OK)))
> + return;
> +
> + ret = virtio_net_flush_tx(n, n->tx_vq);
> + if (ret == -EBUSY) {
> + return; /* Notification re-enable handled by tx_complete */
> + }
> +
> + /* If we flush a full burst of packets, assume there are
> + * more coming and immediately reschedule */
> + if (ret >= n->tx_burst) {
> + qemu_bh_schedule(n->tx_bh);
> + n->tx_waiting = 1;
> + return;
> + }
> +
> + /* If less than a full burst, re-enable notification and flush
> + * anything that may have come in while we weren't looking. If
> + * we find something, assume the guest is still active and reschedule */
> + virtio_queue_set_notification(n->tx_vq, 1);
> + if (virtio_net_flush_tx(n, n->tx_vq) > 0) {
Shouldn't this be virtio_net_flush_tx(n, n->tx_vq) >= n->tx_burst?
If we get less than tx_burst, the ring is empty now so no need to
reschedule.
Right?
> + virtio_queue_set_notification(n->tx_vq, 0);
> + qemu_bh_schedule(n->tx_bh);
> + n->tx_waiting = 1;
> + }
> +}
> +
> static void virtio_net_save(QEMUFile *f, void *opaque)
> {
> VirtIONet *n = opaque;
> @@ -850,8 +895,12 @@ static int virtio_net_load(QEMUFile *f, void *opaque,
> int version_id)
> n->mac_table.first_multi = i;
>
> if (n->tx_waiting) {
> - qemu_mod_timer(n->tx_timer,
> - qemu_get_clock(vm_clock) + n->tx_timeout);
> + if (n->tx_timer) {
> + qemu_mod_timer(n->tx_timer,
> + qemu_get_clock(vm_clock) + n->tx_timeout);
> + } else {
> + qemu_bh_schedule(n->tx_bh);
> + }
> }
> return 0;
> }
> @@ -939,9 +988,9 @@ VirtIODevice *virtio_net_init(DeviceState *dev, NICConf
> *conf,
>
> qemu_format_nic_info_str(&n->nic->nc, conf->macaddr.a);
>
> - n->tx_timer = qemu_new_timer(vm_clock, virtio_net_tx_timer, n);
> n->tx_waiting = 0;
> if (txtimer) {
> + n->tx_timer = qemu_new_timer(vm_clock, virtio_net_tx_timer, n);
> if (txtimer == 1) {
> /* For convenience, 1 = "on" = predefined default, anything else
> * specifies and actual timeout value */
> @@ -949,6 +998,8 @@ VirtIODevice *virtio_net_init(DeviceState *dev, NICConf
> *conf,
> } else {
> n->tx_timeout = txtimer;
> }
> + } else {
> + n->tx_bh = qemu_bh_new(virtio_net_tx_bh, n);
> }
> n->tx_burst = txburst;
> n->mergeable_rx_bufs = 0;
> @@ -982,8 +1033,12 @@ void virtio_net_exit(VirtIODevice *vdev)
> qemu_free(n->mac_table.macs);
> qemu_free(n->vlans);
>
> - qemu_del_timer(n->tx_timer);
> - qemu_free_timer(n->tx_timer);
> + if (n->tx_timer) {
> + qemu_del_timer(n->tx_timer);
> + qemu_free_timer(n->tx_timer);
> + } else {
> + qemu_bh_delete(n->tx_bh);
> + }
>
> virtio_cleanup(&n->vdev);
> qemu_del_vlan_client(&n->nic->nc);
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to address@hidden
> More majordomo info at http://vger.kernel.org/majordomo-info.html
- [Qemu-devel] [PATCH 0/5] virtio-net: More configurability and bh handling for tx, Alex Williamson, 2010/08/27
- [Qemu-devel] [PATCH 2/5] virtio-net: Limit number of packets sent per TX flush, Alex Williamson, 2010/08/27
- [Qemu-devel] [PATCH 3/5] virtio-net: Rename tx_timer_active to tx_waiting, Alex Williamson, 2010/08/27
- [Qemu-devel] [PATCH 4/5] virtio-net: Introduce a new bottom half packet TX, Alex Williamson, 2010/08/27
- [Qemu-devel] Re: [PATCH 4/5] virtio-net: Introduce a new bottom half packet TX,
Michael S. Tsirkin <=
- [Qemu-devel] [PATCH 5/5] virtio-net: Switch default to new bottom half TX handler for iothread, Alex Williamson, 2010/08/27
[Qemu-devel] Re: [PATCH 0/5] virtio-net: More configurability and bh handling for tx, Michael S. Tsirkin, 2010/08/31
[Qemu-devel] Re: [PATCH 0/5] virtio-net: More configurability and bh handling for tx, Michael S. Tsirkin, 2010/08/31