qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] Re: [patch 02/02] sparc32 use empty_slot for missing RAM


From: Blue Swirl
Subject: [Qemu-devel] Re: [patch 02/02] sparc32 use empty_slot for missing RAM
Date: Sat, 17 Apr 2010 09:57:24 +0300

On 4/17/10, Artyom Tarasenko <address@hidden> wrote:
> use empty_slot device for the RAM which is not installed
>
>  Models without ECC don't trap when missing ram is accessed.
>
>  Signed-off-by: Artyom Tarasenko <address@hidden>
>  ---
>   Makefile.target |    2 +-
>   hw/sun4m.c      |    7 ++++++-
>   2 files changed, 7 insertions(+), 2 deletions(-)
>
>  diff --git a/Makefile.target b/Makefile.target
>  index 95c9d23..6362927 100644
>  --- a/Makefile.target
>  +++ b/Makefile.target
>  @@ -248,7 +248,7 @@ obj-sparc-y += cirrus_vga.o
>   else
>   obj-sparc-y = sun4m.o lance.o tcx.o sun4m_iommu.o slavio_intctl.o
>   obj-sparc-y += slavio_timer.o slavio_misc.o sparc32_dma.o
>  -obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o
>  +obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o empty_slot.o
>   endif

The device could be compiled once, so please use instead
Makefile.objs, conditional to CONFIG_EMPTY_SLOT which gets defined in
default-configs/sparc-softmmu.mak.

On the other hand, the device is not used by other boards yet, so
there is no benefit at this point.

>   obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
>  diff --git a/hw/sun4m.c b/hw/sun4m.c
>  index 90e661d..fb49af5 100644
>  --- a/hw/sun4m.c
>  +++ b/hw/sun4m.c
>  @@ -36,6 +36,7 @@
>   #include "isa.h"
>   #include "fw_cfg.h"
>   #include "escc.h"
>  +#include "empty_slot.h"
>   #include "qdev-addr.h"
>   #include "loader.h"
>   #include "elf.h"
>  @@ -820,7 +821,11 @@ static void sun4m_hw_init(const struct sun4m_hwdef 
> *hwdef, ram_addr_t RAM_size,
>
>      /* set up devices */
>      ram_init(0, RAM_size, hwdef->max_mem);
>  -
>  +       /* models without ECC don't trap when missing ram is accessed */
>  +       if(!hwdef->ecc_base) {

The indentation seems to be off and there should be a space between
'if' and '('.

>  +        empty_slot_init(RAM_size, hwdef->max_mem - RAM_size);
>  +    }
>  +
>      prom_init(hwdef->slavio_base, bios_name);
>
>      slavio_intctl = slavio_intctl_init(hwdef->intctl_base,
>
> --
>  1.6.6.1
>
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]