[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Re: [PATCH V6 21/32] pci: move pci host stuff from pci.c to
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] Re: [PATCH V6 21/32] pci: move pci host stuff from pci.c to pci_host.c |
Date: |
Tue, 3 Nov 2009 16:04:27 +0200 |
User-agent: |
Mutt/1.5.19 (2009-01-05) |
On Fri, Oct 30, 2009 at 09:21:15PM +0900, Isaku Yamahata wrote:
> Move pci host stuff from pci.c to pci_host.c.
> And add some comments.
> Later pcie host bridge functions will be defined in pcie_host.c
> not to bloat pci.c.
For consistency, should we also move declaration to appropriate header,
and rename it as well?
> Signed-off-by: Isaku Yamahata <address@hidden>
> ---
> hw/pci.c | 67
> ---------------------------------------------------------
> hw/pci_host.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 63 insertions(+), 67 deletions(-)
>
> diff --git a/hw/pci.c b/hw/pci.c
> index d0a96c6..a599996 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -663,73 +663,6 @@ void pci_default_write_config(PCIDevice *d, uint32_t
> addr, uint32_t val, int l)
> pci_update_mappings(d);
> }
>
> -static inline PCIDevice *pci_addr_to_dev(PCIBus *bus, uint32_t addr)
> -{
> - uint8_t bus_num = (addr >> 16) & 0xff;
> - uint8_t devfn = (addr >> 8) & 0xff;
> - return pci_find_device(bus, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
> -}
> -
> -static inline int pci_addr_to_config(uint32_t addr)
> -{
> - return addr & (PCI_CONFIG_SPACE_SIZE - 1);
> -}
> -
> -void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len)
> -{
> - PCIBus *s = opaque;
> - PCIDevice *pci_dev;
> - int config_addr;
> -
> -#if 0
> - PCI_DPRINTF("pci_data_write: addr=%08x val=%08x len=%d\n",
> - addr, val, len);
> -#endif
> - pci_dev = pci_addr_to_dev(s, addr);
> - if (!pci_dev)
> - return;
> - config_addr = addr & 0xff;
> - config_addr = pci_addr_to_config(addr);
> - PCI_DPRINTF("pci_config_write: %s: addr=%02x val=%08x len=%d\n",
> - pci_dev->name, config_addr, val, len);
> - pci_dev->config_write(pci_dev, config_addr, val, len);
> -}
> -
> -uint32_t pci_data_read(void *opaque, uint32_t addr, int len)
> -{
> - PCIBus *s = opaque;
> - PCIDevice *pci_dev;
> - int config_addr;
> - uint32_t val;
> -
> - pci_dev = pci_addr_to_dev(s, addr);
> - if (!pci_dev) {
> - switch(len) {
> - case 1:
> - val = 0xff;
> - break;
> - case 2:
> - val = 0xffff;
> - break;
> - default:
> - case 4:
> - val = 0xffffffff;
> - break;
> - }
> - goto the_end;
> - }
> - config_addr = pci_addr_to_config(addr);
> - val = pci_dev->config_read(pci_dev, config_addr, len);
> - PCI_DPRINTF("pci_config_read: %s: addr=%02x val=%08x len=%d\n",
> - pci_dev->name, config_addr, val, len);
> - the_end:
> -#if 0
> - PCI_DPRINTF("pci_data_read: addr=%08x val=%08x len=%d\n",
> - addr, val, len);
> -#endif
> - return val;
> -}
> -
> /***********************************************************/
> /* generic PCI irq support */
>
> diff --git a/hw/pci_host.c b/hw/pci_host.c
> index 6009e37..351ade4 100644
> --- a/hw/pci_host.c
> +++ b/hw/pci_host.c
> @@ -32,6 +32,69 @@ do { printf("pci_host_data: " fmt , ## __VA_ARGS__); }
> while (0)
> #define PCI_DPRINTF(fmt, ...)
> #endif
>
> +/*
> + * PCI address
> + * bit 16 - 24: bus number
> + * bit 8 - 15: devfun number
> + * bit 0 - 7: offset in configuration space of a given pci device
> + */
> +
> +/* the helper functio to get a PCIDeice* for a given pci address */
> +static inline PCIDevice *pci_addr_to_dev(PCIBus *bus, uint32_t addr)
> +{
> + uint8_t bus_num = (addr >> 16) & 0xff;
> + uint8_t devfn = (addr >> 8) & 0xff;
> + return pci_find_device(bus, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
> +}
> +
> +static inline uint32_t pci_addr_to_config(uint32_t addr)
> +{
> + return addr & (PCI_CONFIG_SPACE_SIZE - 1);
> +}
> +
> +void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len)
> +{
> + PCIBus *s = opaque;
> + PCIDevice *pci_dev = pci_addr_to_dev(s, addr);
> + uint32_t config_addr = pci_addr_to_config(addr);
> +
> + if (!pci_dev)
> + return;
> +
> + PCI_DPRINTF("%s: %s: addr=%02"PRIx32" val=%08"PRI32x" len=%d\n",
> + __func__, pci_dev->name, config_addr, val, len);
> + pci_dev->config_write(pci_dev, config_addr, val, len);
> +}
> +
> +uint32_t pci_data_read(void *opaque, uint32_t addr, int len)
> +{
> + PCIBus *s = opaque;
> + PCIDevice *pci_dev = pci_addr_to_dev(s, addr);
> + uint32_t config_addr = pci_addr_to_config(addr);
> + uint32_t val;
> +
> + if (!pci_dev) {
> + switch(len) {
> + case 1:
> + val = 0xff;
> + break;
> + case 2:
> + val = 0xffff;
> + break;
> + default:
> + case 4:
> + val = 0xffffffff;
> + break;
> + }
We can do the memcpy trick here as well I think.
> + } else {
> + val = pci_dev->config_read(pci_dev, config_addr, len);
> + PCI_DPRINTF("%s: %s: addr=%02"PRIx32" val=%08"PRIx32" len=%d\n",
> + __func__, pci_dev->name, config_addr, val, len);
> + }
> +
> + return val;
> +}
> +
> static void pci_host_config_writel(void *opaque, target_phys_addr_t addr,
> uint32_t val)
> {
> --
> 1.6.0.2
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] Re: [PATCH V6 21/32] pci: move pci host stuff from pci.c to pci_host.c,
Michael S. Tsirkin <=