[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 10/14] Stash VGA physical address and use it in KVM
From: |
Zachary Amsden |
Subject: |
[Qemu-devel] [PATCH 10/14] Stash VGA physical address and use it in KVM callbacks. Stash VGA physical pointer in cirrus vga as well. |
Date: |
Thu, 30 Jul 2009 00:15:08 -1000 |
Signed-off-by: Zachary Amsden <address@hidden>
---
hw/cirrus_vga.c | 18 ++++++++----------
hw/vga.c | 9 +++++----
hw/vga_int.h | 1 +
3 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
index 2287e94..60c67fe 100644
--- a/hw/cirrus_vga.c
+++ b/hw/cirrus_vga.c
@@ -1219,7 +1219,7 @@ static void cirrus_update_bank_ptr(CirrusVGAState * s,
unsigned bank_index)
/* Thinking about changing bank base? First, drop the dirty bitmap
information
* on the current location, otherwise we lose this pointer forever */
if (s->vga.lfb_vram_mapped) {
- target_phys_addr_t base_addr = isa_mem_base + 0xa0000 + bank_index
* 0x8000;
+ target_phys_addr_t base_addr = s->vga.vram_phys + bank_index *
0x8000;
cpu_physical_sync_dirty_bitmap(base_addr, 0x8000);
}
s->cirrus_bank_base[bank_index] = offset;
@@ -2603,16 +2603,15 @@ static void map_linear_vram(CirrusVGAState *s)
&& !((s->vga.gr[0x0B] & 0x14) == 0x14)
&& !(s->vga.gr[0x0B] & 0x02)) {
- cpu_register_physical_memory(isa_mem_base + 0xa0000, 0x8000,
+ cpu_register_physical_memory(s->vga.vram_phys, 0x8000,
(s->vga.vram_offset +
s->cirrus_bank_base[0]) | IO_MEM_RAM);
- cpu_register_physical_memory(isa_mem_base + 0xa8000, 0x8000,
+ cpu_register_physical_memory(s->vga.vram_phys + 0x8000, 0x8000,
(s->vga.vram_offset +
s->cirrus_bank_base[1]) | IO_MEM_RAM);
s->vga.lfb_vram_mapped = 1;
}
else {
- cpu_register_physical_memory(isa_mem_base + 0xa0000, 0x20000,
- s->vga.vga_io_memory);
+ cpu_register_physical_memory(s->vga.vram_phys, 0x20000,
s->vga.vga_io_memory);
}
vga_dirty_log_start(&s->vga);
@@ -2623,8 +2622,7 @@ static void unmap_linear_vram(CirrusVGAState *s)
if (s->vga.map_addr && s->vga.lfb_addr && s->vga.lfb_end)
s->vga.map_addr = s->vga.map_size = 0;
- cpu_register_physical_memory(isa_mem_base + 0xa0000, 0x20000,
- s->vga.vga_io_memory);
+ cpu_register_physical_memory(s->vga.vram_phys, 0x20000,
s->vga.vga_io_memory);
}
/* Compute the memory access functions */
@@ -3197,11 +3195,11 @@ static void cirrus_init_common(CirrusVGAState * s, int
device_id, int is_pci)
register_ioport_read(0x3ba, 1, 1, vga_ioport_read, s);
register_ioport_read(0x3da, 1, 1, vga_ioport_read, s);
+ s->vga.vram_phys = isa_mem_base + 0xa0000;
s->vga.vga_io_memory = cpu_register_io_memory(cirrus_vga_mem_read,
cirrus_vga_mem_write, s);
- cpu_register_physical_memory(isa_mem_base + 0x000a0000, 0x20000,
- s->vga.vga_io_memory);
- qemu_register_coalesced_mmio(isa_mem_base + 0x000a0000, 0x20000);
+ cpu_register_physical_memory(s->vga.vram_phys, 0x20000,
s->vga.vga_io_memory);
+ qemu_register_coalesced_mmio(s->vga.vram_phys, 0x20000);
/* I/O handler for LFB */
s->cirrus_linear_io_addr =
diff --git a/hw/vga.c b/hw/vga.c
index 907cdb7..0941962 100644
--- a/hw/vga.c
+++ b/hw/vga.c
@@ -1574,8 +1574,8 @@ static void vga_sync_dirty_bitmap(VGAState *s)
cpu_physical_sync_dirty_bitmap(s->map_addr, s->map_size);
if (s->lfb_vram_mapped) {
- cpu_physical_sync_dirty_bitmap(isa_mem_base + 0xa0000, 0x8000);
- cpu_physical_sync_dirty_bitmap(isa_mem_base + 0xa8000, 0x8000);
+ cpu_physical_sync_dirty_bitmap(s->vram_phys, 0x8000);
+ cpu_physical_sync_dirty_bitmap(s->vram_phys + 0x8000, 0x8000);
}
}
@@ -2230,8 +2230,8 @@ void vga_dirty_log_start(VGAState *s)
kvm_log_start(s->map_addr, s->map_size);
if (kvm_enabled() && s->lfb_vram_mapped) {
- kvm_log_start(isa_mem_base + 0xa0000, 0x8000);
- kvm_log_start(isa_mem_base + 0xa8000, 0x8000);
+ kvm_log_start(s->vram_phys, 0x8000);
+ kvm_log_start(s->vram_phys + 0x8000, 0x8000);
}
}
@@ -2409,6 +2409,7 @@ void vga_init(VGAState *s, target_phys_addr_t vram_base,
s->bank_offset = 0;
s->it_shift = it_shift;
+ s->vram_phys = vram_base;
/* Pass ctrl_base to setup memory mapped I/O control */
if (ctrl_base) {
diff --git a/hw/vga_int.h b/hw/vga_int.h
index f072663..bab04c6 100644
--- a/hw/vga_int.h
+++ b/hw/vga_int.h
@@ -102,6 +102,7 @@ typedef struct VGACommonState {
uint8_t *vram_ptr;
ram_addr_t vram_offset;
unsigned int vram_size;
+ target_phys_addr_t vram_phys;
uint32_t lfb_addr;
uint32_t lfb_end;
uint32_t map_addr;
--
1.6.2.5
- [Qemu-devel] Various VGA / VNC fixes and cleanups to prep for multiheaded graphics, Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 01/14] Add a configure switch to enable / disable all user targets. I felt compelled to do it for symmetry, mostly it is useful to disable user targets when you don't want to build them., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 02/14] Don't segfault when changing VNC password on an SDL display., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 03/14] When using stdio monitor and VNC display, one can set or clear a VNC password; this should set or turn off VNC authentication as well., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 04/14] Clean up VGA type selection; far too many variables being used to track one state leads to confusion if new variables are added., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 05/14] Change cpu_phys mem callback to use [offset, size) bounds instead of [start, end)., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 06/14] Split VGA ioport init into a helper function., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 07/14] Code motion; make mm VGA init function more like standard vga init function. Add missing vga_reset hook to vga_mm_init., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 08/14] Make VGA vram offset passed into vga_mm_init absolute. Since this is a function of the platform, it makes sense to have it be explicitly known in the platform layer rather than hardcoded inside the vga code., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 09/14] Further transformation: use common vga_init() which allows either I/O port or memory mapped based control., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 10/14] Stash VGA physical address and use it in KVM callbacks. Stash VGA physical pointer in cirrus vga as well.,
Zachary Amsden <=
- [Qemu-devel] [PATCH 11/14] Add some defined constants for VGA offsets., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 12/14] Add a PCI BAR for the VGA ROM which is mapped into cirrus_vga. This makes the cirrus device complete under some X servers which require the V_BIOS mapping., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 13/14] Allow cirrus VGA to be initialized multiple times; only the first init takes the ISA memory region and hardware I/O ports., Zachary Amsden, 2009/07/30
- [Qemu-devel] [PATCH 14/14] Atrocious and horrendous patch to demonstrate multiple SDL displays. The multiple SDL displays can be seen on one console, using ctrl-alt-1/2 to switch between them., Zachary Amsden, 2009/07/30
- [Qemu-devel] Re: [PATCH 07/14] Code motion; make mm VGA init function more like standard vga init function. Add missing vga_reset hook to vga_mm_init., Jan Kiszka, 2009/07/30
- [Qemu-devel] Re: [PATCH 05/14] Change cpu_phys mem callback to use [offset, size) bounds instead of [start, end)., Jan Kiszka, 2009/07/30
Re: [Qemu-devel] Various VGA / VNC fixes and cleanups to prep for multiheaded graphics, Daniel P. Berrange, 2009/07/30