qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [6901] Clean some PCI defines (Stefan Weil)


From: Anthony Liguori
Subject: [Qemu-devel] [6901] Clean some PCI defines (Stefan Weil)
Date: Sat, 28 Mar 2009 17:29:07 +0000

Revision: 6901
          http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=6901
Author:   aliguori
Date:     2009-03-28 17:29:07 +0000 (Sat, 28 Mar 2009)
Log Message:
-----------
Clean some PCI defines (Stefan Weil)

this patch adds some more defines from linux/pci_regs.h to
hw/pci.h. There is now no longer a need to define them in
eepro100.c, so they were removed there.

Some defines from linux/pci_regs.h had similar, but not
the same defines in hw/pci.h (PCI_REVISION_ID / PCI_REVISION,
PCI_SUBSYSTEM_VENDOR_ID / PCI_SUBVENDOR_ID,
PCI_SUBSYSTEM_ID / PCI_SUBDEVICE_ID).

I suggest to use the "standard" from linux/pci_regs.h and
replace the "old" Qemu ones. To facilitate the migration,
my patch does not remove the old defines but marks them
as obsolete. After a migration to the "standard" defines,
pci.h could use linux/pci_regs.h which is far more complete.

The patch is needed for an updated maintainer version of
hw/eepro100.c which I'd like to see in Qemu stable.

 * Remove declarations already declared in header file from eepro100.c
 * Add missing declarations from pci_regs.h to pci.h
 * Mark "non-standard" declarations in pci.h as obsolete

Signed-off-by: Stefan Weil <address@hidden>
Signed-off-by: Anthony Liguori <address@hidden>

Modified Paths:
--------------
    trunk/hw/eepro100.c
    trunk/hw/pci.h

Modified: trunk/hw/eepro100.c
===================================================================
--- trunk/hw/eepro100.c 2009-03-28 17:29:02 UTC (rev 6900)
+++ trunk/hw/eepro100.c 2009-03-28 17:29:07 UTC (rev 6901)
@@ -47,12 +47,6 @@
 
 /* Common declarations for all PCI devices. */
 
-#define PCI_DEVICE_ID           0x02    /* 16 bits */
-#define PCI_COMMAND             0x04    /* 16 bits */
-#define PCI_STATUS              0x06    /* 16 bits */
-
-#define PCI_REVISION_ID         0x08    /* 8 bits  */
-
 #define PCI_CONFIG_8(offset, value) \
     (pci_conf[offset] = (value))
 #define PCI_CONFIG_16(offset, value) \

Modified: trunk/hw/pci.h
===================================================================
--- trunk/hw/pci.h      2009-03-28 17:29:02 UTC (rev 6900)
+++ trunk/hw/pci.h      2009-03-28 17:29:07 UTC (rev 6901)
@@ -55,7 +55,7 @@
 #define PCI_DEVICE_ID_VMWARE_SCSI        0x0730
 #define PCI_DEVICE_ID_VMWARE_IDE         0x1729
 
-#define PCI_VENDOR_ID_INTEL              0x8086
+/* Intel (0x8086) */
 #define PCI_DEVICE_ID_INTEL_82551IT      0x1209
 
 /* Red Hat / Qumranet (for QEMU) -- see pci-ids.txt */
@@ -92,20 +92,27 @@
 
 #define PCI_DEVICES_MAX 64
 
+/* Declarations from linux/pci_regs.h */
 #define PCI_VENDOR_ID          0x00    /* 16 bits */
 #define PCI_DEVICE_ID          0x02    /* 16 bits */
 #define PCI_COMMAND            0x04    /* 16 bits */
 #define  PCI_COMMAND_IO                0x1     /* Enable response in I/O space 
*/
 #define  PCI_COMMAND_MEMORY    0x2     /* Enable response in Memory space */
-#define PCI_REVISION            0x08
+#define PCI_STATUS              0x06    /* 16 bits */
+#define PCI_REVISION_ID         0x08    /* 8 bits  */
 #define PCI_CLASS_DEVICE        0x0a    /* Device class */
-#define PCI_SUBVENDOR_ID       0x2c    /* 16 bits */
-#define PCI_SUBDEVICE_ID       0x2e    /* 16 bits */
+#define PCI_HEADER_TYPE         0x0e    /* 8 bits */
+#define PCI_SUBSYSTEM_VENDOR_ID 0x2c    /* 16 bits */
+#define PCI_SUBSYSTEM_ID        0x2e    /* 16 bits */
 #define PCI_INTERRUPT_LINE     0x3c    /* 8 bits */
 #define PCI_INTERRUPT_PIN      0x3d    /* 8 bits */
 #define PCI_MIN_GNT            0x3e    /* 8 bits */
 #define PCI_MAX_LAT            0x3f    /* 8 bits */
 
+#define PCI_REVISION            0x08    /* obsolete, use PCI_REVISION_ID */
+#define PCI_SUBVENDOR_ID        0x2c    /* obsolete, use 
PCI_SUBSYSTEM_VENDOR_ID */
+#define PCI_SUBDEVICE_ID        0x2e    /* obsolete, use PCI_SUBSYSTEM_ID */
+
 /* Bits in the PCI Status Register (PCI 2.3 spec) */
 #define PCI_STATUS_RESERVED1   0x007
 #define PCI_STATUS_INT_STATUS  0x008





reply via email to

[Prev in Thread] Current Thread [Next in Thread]