[Qemu-devel] [PATCH][RESEND] Allow additions of ACPI tables from command line

[Gleb Natapov]

This is needed to dynamically add SLIC tables with Windows
activation keys.
    
Signed-off-by: Gleb Natapov <address@hidden>
diff --git a/hw/acpi.c b/hw/acpi.c
index 3185158..52bc43a 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -746,3 +746,172 @@ void qemu_system_device_hot_add(int bus, int slot, int 
state)
         qemu_set_irq(pm_state->irq, 0);
     }
 }
+
+struct acpi_table_header
+{
+    char signature [4];    /* ACPI signature (4 ASCII characters) */
+    uint32_t length;          /* Length of table, in bytes, including header */
+    uint8_t revision;         /* ACPI Specification minor version # */
+    uint8_t checksum;         /* To make sum of entire table == 0 */
+    char oem_id [6];       /* OEM identification */
+    char oem_table_id [8]; /* OEM table identification */
+    uint32_t oem_revision;    /* OEM revision number */
+    char asl_compiler_id [4]; /* ASL compiler vendor ID */
+    uint32_t asl_compiler_revision; /* ASL compiler revision number */
+} __attribute__((packed));
+
+char *acpi_tables;
+size_t acpi_tables_len;
+
+static int acpi_checksum(const uint8_t *data, int len)
+{
+    int sum, i;
+    sum = 0;
+    for(i = 0; i < len; i++)
+        sum += data[i];
+    return (-sum) & 0xff;
+}
+
+int acpi_table_add(const char *t)
+{
+    static const char *dfl_id = "QEMUQEMU";
+    char buf[1024], *p, *f;
+    struct acpi_table_header acpi_hdr;
+    unsigned long val;
+    size_t off;
+
+    memset(&acpi_hdr, 0, sizeof(acpi_hdr));
+  
+    if (get_param_value(buf, sizeof(buf), "sig", t)) {
+        strncpy(acpi_hdr.signature, buf, 4);
+    } else {
+        strncpy(acpi_hdr.signature, dfl_id, 4);
+    }
+    if (get_param_value(buf, sizeof(buf), "rev", t)) {
+        val = strtoul(buf, &p, 10);
+        if (val > 255 || *p != '\0')
+            goto out;
+    } else {
+        val = 1;
+    }
+    acpi_hdr.revision = (int8_t)val;
+
+    if (get_param_value(buf, sizeof(buf), "oem_id", t)) {
+        strncpy(acpi_hdr.oem_id, buf, 6);
+    } else {
+        strncpy(acpi_hdr.oem_id, dfl_id, 6);
+    }
+
+    if (get_param_value(buf, sizeof(buf), "oem_table_id", t)) {
+        strncpy(acpi_hdr.oem_table_id, buf, 8);
+    } else {
+        strncpy(acpi_hdr.oem_table_id, dfl_id, 8);
+    }
+
+    if (get_param_value(buf, sizeof(buf), "oem_rev", t)) {
+        val = strtol(buf, &p, 10);
+        if(*p != '\0')
+            goto out;
+    } else {
+        val = 1;
+    }
+    acpi_hdr.oem_revision = cpu_to_le32(val);
+
+    if (get_param_value(buf, sizeof(buf), "asl_compiler_id", t)) {
+        strncpy(acpi_hdr.asl_compiler_id, buf, 4);
+    } else {
+        strncpy(acpi_hdr.asl_compiler_id, dfl_id, 4);
+    }
+
+    if (get_param_value(buf, sizeof(buf), "asl_compiler_rev", t)) {
+        val = strtol(buf, &p, 10);
+        if(*p != '\0')
+            goto out;
+    } else {
+        val = 1;
+    }
+    acpi_hdr.asl_compiler_revision = cpu_to_le32(val);
+    
+    if (!get_param_value(buf, sizeof(buf), "data", t)) {
+         buf[0] = '\0';
+    }
+
+    acpi_hdr.length = sizeof(acpi_hdr);
+
+    f = buf;
+    while (buf[0]) {
+        struct stat s;
+        char *n = index(f, ':');
+        if (n)
+            *n = '\0';
+        if(stat(f, &s) < 0) {
+            fprintf(stderr, "Can't stat file '%s': %s\n", f, strerror(errno));
+            goto out;
+        }
+        acpi_hdr.length += s.st_size;
+        if (!n)
+            break;
+        *n = ':';
+        f = n + 1;
+    }
+
+    if (!acpi_tables) {
+        acpi_tables_len = sizeof(uint16_t);
+        acpi_tables = qemu_mallocz(acpi_tables_len);
+    }
+    p = acpi_tables + acpi_tables_len;
+    acpi_tables_len += sizeof(uint16_t) + acpi_hdr.length;
+    acpi_tables = qemu_realloc(acpi_tables, acpi_tables_len);
+
+    acpi_hdr.length = cpu_to_le32(acpi_hdr.length);
+    *(uint16_t*)p = acpi_hdr.length;
+    p += sizeof(uint16_t);
+    memcpy(p, &acpi_hdr, sizeof(acpi_hdr));
+    off = sizeof(acpi_hdr);
+
+    f = buf;
+    while (buf[0]) {
+        struct stat s;
+        int fd;
+        char *n = index(f, ':');
+        if (n)
+            *n = '\0';
+        fd = open(f, O_RDONLY);
+
+        if(fd < 0)
+            goto out;
+        if(fstat(fd, &s) < 0) {
+            close(fd);
+            goto out;
+        }
+
+        do {
+            int r;
+            r = read(fd, p + off, s.st_size);
+            if (r > 0) {
+                off += r;
+                s.st_size -= r;
+            } else if ((r < 0 && errno != EINTR) || r == 0) {
+                close(fd);
+                goto out;
+            }
+        } while(s.st_size);
+
+        close(fd);
+        if (!n)
+            break;
+        f = n + 1;
+    }
+
+    ((struct acpi_table_header*)p)->checksum = acpi_checksum((uint8_t*)p, off);
+    /* increase number of tables */
+    (*(uint16_t*)acpi_tables) =
+           cpu_to_le32(le32_to_cpu(*(uint16_t*)acpi_tables) + 1);
+    return 0;
+out:
+    if (acpi_tables) {
+        free(acpi_tables);
+        acpi_tables = NULL;
+    }
+    return -1;
+}
diff --git a/hw/pc.c b/hw/pc.c
index 57ba803..3849390 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -50,9 +50,13 @@
 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables.  */
 #define ACPI_DATA_SIZE       0x10000
 #define BIOS_CFG_IOPORT 0x510
+#define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
 
 #define MAX_IDE_BUS 2
 
+extern uint8_t *acpi_tables;
+extern size_t acpi_tables_len;
+
 static fdctrl_t *floppy_controller;
 static RTCState *rtc_state;
 static PITState *pit;
@@ -438,6 +442,7 @@ static void bochs_bios_init(void)
     fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
     fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
     fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
+    fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, acpi_tables, acpi_tables_len);
 }
 
 /* Generate an initial boot sector which sets state and jump to
diff --git a/hw/pc.h b/hw/pc.h
index 7f21144..5578b3a 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -102,6 +102,7 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t 
smb_io_base,
                        qemu_irq sci_irq);
 void piix4_smbus_register_device(SMBusDevice *dev, uint8_t addr);
 void acpi_bios_init(void);
+int acpi_table_add(const char *table_desc);
 
 /* hpet.c */
 extern int no_hpet;
diff --git a/qemu-doc.texi b/qemu-doc.texi
index 8322a08..39a3a76 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -896,6 +896,9 @@ only).
 @item -no-hpet
 Disable HPET support.
 
address@hidden -acpitable 
address@hidden,address@hidden,address@hidden,address@hidden,address@hidden 
[,address@hidden,address@hidden,address@hidden:@var{file2}]...]
+Add ACPI table with specified header fields and context from specified files.
+
 @end table
 
 Linux boot specific: When using these options, you can use a given
diff --git a/vl.c b/vl.c
index b653056..00ae387 100644
--- a/vl.c
+++ b/vl.c
@@ -4016,6 +4016,8 @@ static void help(int exitcode)
            "-no-fd-bootchk  disable boot signature checking for floppy disks\n"
            "-no-acpi        disable ACPI\n"
            "-no-hpet        disable HPET\n"
+           "-acpitable 
[sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]\n"
+           "                ACPI table description\n"
 #endif
            "Linux boot specific:\n"
            "-kernel bzImage use 'bzImage' as kernel image\n"
@@ -4151,6 +4153,7 @@ enum {
     QEMU_OPTION_no_fd_bootchk,
     QEMU_OPTION_no_acpi,
     QEMU_OPTION_no_hpet,
+    QEMU_OPTION_acpitable,
 
     /* Linux boot specific: */
     QEMU_OPTION_kernel,
@@ -4269,6 +4272,7 @@ static const QEMUOption qemu_options[] = {
     { "no-fd-bootchk", 0, QEMU_OPTION_no_fd_bootchk },
     { "no-acpi", 0, QEMU_OPTION_no_acpi },
     { "no-hpet", 0, QEMU_OPTION_no_hpet },
+    { "acpitable", HAS_ARG, QEMU_OPTION_acpitable },
 #endif
 
     /* Linux boot specific: */
@@ -5128,6 +5132,12 @@ int main(int argc, char **argv, char **envp)
             case QEMU_OPTION_rtc_td_hack:
                 rtc_td_hack = 1;
                 break;
+            case QEMU_OPTION_acpitable:
+                if(acpi_table_add(optarg) < 0) {
+                    fprintf(stderr, "Wrong acpi table provided\n");
+                    exit(1);
+                }
+                break;
 #endif
 #ifdef USE_KQEMU
             case QEMU_OPTION_no_kqemu:
--
                        Gleb.