[Qemu-devel] RESEND: qemu spinning on serial port writes

[David S. Ahern]

I sent this right before the holidays, and I have not seen any response.
Has anyone had success connecting guest serial port to host serial port
directly with guest boot output streaming out?

david


David S. Ahern wrote:
> I am trying to redirect a guest's boot output through the host's serial
> port.  Shortly after launching qemu, the main thread is spinning on:
> 
> write(9, "0", 1)   = -1 EAGAIN (Resource temporarily unavailable)
> 
> fd 9 is the serial port, ttyS0.
> 
> 
> The backtrace for the thread is:
> 
> #0  0x00002ac3433f8c0b in write () from /lib64/libpthread.so.0
> #1  0x0000000000475df9 in send_all (fd=9, buf=<value optimized out>,
> len1=1) at qemu-char.c:477
> #2  0x000000000043a102 in serial_xmit (opaque=<value optimized out>) at
> /root/kvm-81/qemu/hw/serial.c:311
> #3  0x000000000043a591 in serial_ioport_write (opaque=0x14971790,
> addr=<value optimized out>, val=48)
>     at /root/kvm-81/qemu/hw/serial.c:366
> #4  0x00000000410eeedc in ?? ()
> #5  0x0000000000129000 in ?? ()
> #6  0x0000000014821fa0 in ?? ()
> #7  0x0000000000000007 in ?? ()
> #8  0x00000000004a54c5 in tlb_set_page_exec (env=0x10ab4,
> vaddr=46912496956816, paddr=1, prot=-1, mmu_idx=0, is_softmmu=1)
>     at /root/kvm-81/qemu/exec.c:388
> #9  0x0000000000512f3b in tlb_fill (addr=345446292, is_write=1,
> mmu_idx=-1, retaddr=0x0)
>     at /root/kvm-81/qemu/target-i386/op_helper.c:4690
> #10 0x00000000004a6bd2 in __ldb_cmmu (addr=9, mmu_idx=0) at
> /root/kvm-81/qemu/softmmu_template.h:135
> #11 0x00000000004a879b in cpu_x86_exec (env1=<value optimized out>) at
> /root/kvm-81/qemu/cpu-exec.c:628
> #12 0x000000000040ba29 in main (argc=12, argv=0x7fff67f7a398) at
> /root/kvm-81/qemu/vl.c:3816
> 
> send_all() invokes unix_write() which by design is not breaking out on
> EAGAIN.
> 
> The following command is enough to show the problem:
> 
> qemu-system-x86_64 -m 256 -smp 1 -no-kvm \
>     -drivefile=/dev/cciss/c0d0,if=scsi,cache=off,boot=on \
>     -vnc :1 -serial /dev/ttyS0
> 
> 
> The guest is running RHEL3 with the parameter 'console=ttyS0' added to
> grub.conf; the problem appears to be with qemu, so I would expect it to
> show with any linux guest. This particular host is running RHEL5.2 with
> kvm-81, but I have also seen the problem with Fedora-9 as the host OS.
> 
> Yes, the serial port of the server is connected to another system via a
> null modem. If I change the serial argument to '-serial udp::4555' and
> use  'nc -u -l  localhost 4555  > /dev/ttyS0' I see the guest's boot
> output show up on the second system as expected. I'd prefer to be able
> to use the serial port connection directly without nc as a proxy.
> Suggestions?
> 
> david
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to address@hidden
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>