Linux version 2.6.22.1-33.fc7 (address@hidden) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Mon Jul 23 16:59:15 EDT 2007 Command line: ro root=/dev/VolGroup00/LogVol00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 131056) 1 entries of 3200 used end_pfn_map = 1048576 DMI not present or invalid. ACPI: RSDP 000FA5D0, 0014 (r0 QEMU ) ACPI: RSDT 1FFF0000, 002C (r0 QEMU QEMURSDT 1 QEMU 1) ACPI: FACP 1FFF002C, 0074 (r0 QEMU QEMUFACP 1 QEMU 1) ACPI: DSDT 1FFF0100, 0832 (r1 BXPC BXDSDT 1 INTL 20060912) ACPI: FACS 1FFF00C0, 0040 ACPI: APIC 1FFF0938, 0040 (r0 QEMU QEMUAPIC 1 QEMU 1) No NUMA configuration found Faking a node at 0000000000000000-000000001fff0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 131056) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000001fff0000 No mptable found. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 131056 On node 0 totalpages: 130959 DMA zone: 56 pages used for memmap DMA zone: 1297 pages reserved DMA zone: 2646 pages, LIFO batch:0 DMA32 zone: 1735 pages used for memmap DMA32 zone: 125225 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0xb008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: IRQ11 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000 swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 20000000:dffc0000) SMP: Allowing 1 CPUs, 0 hotplug CPUs PERCPU: Allocating 40968 bytes of per cpu data Built 1 zonelists. Total pages: 127871 Kernel command line: ro root=/dev/VolGroup00/LogVol00 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) time.c: Detected 2400.209 MHz processor. Console: colour VGA+ 80x25 Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 507540k/524224k available (2361k kernel code, 16296k reserved, 1401k data, 312k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 9611.40 BogoMIPS (lpj=4805704) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code Freeing SMP alternatives: 28k freed ACPI: Core revision 20070126 Using local APIC timer interrupts. result 62509235 Detected 62.509 MHz APIC timer. Brought up 1 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2048 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region b000-b03f claimed by PIIX4 ACPI PCI quirk: region b100-b10f claimed by PIIX4 SMB ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 6 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. Time: tsc clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 393216 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3751k freed audit: initializing netlink socket (disabled) audit(1185547631.924:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 84686AF648AEAA42 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Activating ISA DMA hang workarounds. Boot video device is 0000:00:02.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Processor cpuid 623 not supported drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 312k freed Write protecting the kernel read-only data: 1060k input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:01.2 to 64 uhci_hcd 0000:00:01.2: UHCI Host Controller uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:01.2: irq 9, io base 0x0000c020 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver usb 1-2: new full speed USB device using uhci_hcd and address 2 SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:01.1: version 2.11 PCI: Setting latency timer of device 0000:00:01.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001c000 irq 14 ata2: PATA max MWDMA2 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001c008 irq 15 usb 1-2: configuration #1 chosen from 1 choice input: QEMU 0.9.0 QEMU USB Tablet as /class/input/input3 input: USB HID v0.01 Pointer [QEMU 0.9.0 QEMU USB Tablet] on usb-0000:00:01.2-2 ata1.00: ATA-7: QEMU HARDDISK, 0.9.0, max UDMA/100 ata1.00: 8388608 sectors, multi 16: LBA48 ata1.00: configured for MWDMA2 ata2.00: ATAPI: QEMU CD-ROM, 0.9.0, max UDMA/100 ata2.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.9. PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.9. PQ: 0 ANSI: 5 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: address@hidden kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1185547638.275:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats security: 60 classes, 65638 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1185547640.046:3): policy loaded auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 4x/4x xa/form2 tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL-8029 found at 0xc100, IRQ 10, 52:54:00:12:34:56. parport_pc 00:04: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] loop: module loaded FDC 0 is a S82078B lp0: using parport0 (interrupt-driven). lp0: console ready No dock devices found. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts