[Qemu-devel] Running u-boot on qemu's emulation of arm integratorcp926?

[Michael Opdenacker]

Hello,

My plans are to use qemu's arm system emulation for u-boot demonstration 
and education purposes:

   * In my embeded Linux training sessions, to practice with U-boot
     without having to carry real boards, with their cables and power
     supplies (which would definitely make customs officers frown and
     think I'm importing commercial or even sensitive devices).
   * For students and community members, to get familiar with U-boot
     without having to get real hardware.
   * To create qemu/U-boot demos, showing the capabilities of both tools.

Has anyone already experimented with this? I haven't found any useful 
detail on the net yet.

As I have no U-boot development knowledge yet, I started in a naive, 
optimistic way:

   * Got U-boot 1.1.5 sources
   * Configured U-boot for the arm integratorcp926 board:
     make make cp926ejs_config
   * Compiled U-boot with a gcc 3.4.x cross compiling toolchain for arm:
     export PATH=/usr/local/uclibc-0.9.28-3/arm/bin:$PATH
     make
   * Ran qemu:
     qemu-system-arm -kernel ~/tmp/tmp/u-boot-1.1.5/u-boot.bin -nographic

(qemu) qemu: fatal: Board reset
R00=10000000 R01=00000008 R02=00000013 R03=00000000
R04=00000000 R05=00000000 R06=00000000 R07=00000000
R08=00000000 R09=00000000 R10=00000000 R11=00000000
R12=00010064 R13=00000000 R14=000100f4 R15=000103a0
PSR=800001d3 N--- A svc32 bff14784
s00=00000000(0.000000) s01=00000000(0.000000) d00=0000000000000000(0.000000)
s02=00000000(0.000000) s03=00000000(0.000000) d01=0000000000000000(0.000000)
s04=00000000(0.000000) s05=00000000(0.000000) d02=0000000000000000(0.000000)
s06=00000000(0.000000) s07=00000000(0.000000) d03=0000000000000000(0.000000)
s08=00000000(0.000000) s09=00000000(0.000000) d04=0000000000000000(0.000000)
s10=00000000(0.000000) s11=00000000(0.000000) d05=0000000000000000(0.000000)
s12=00000000(0.000000) s13=00000000(0.000000) d06=0000000000000000(0.000000)
s14=00000000(0.000000) s15=00000000(0.000000) d07=0000000000000000(0.000000)
s16=00000000(0.000000) s17=00000000(0.000000) d08=0000000000000000(0.000000)
s18=00000000(0.000000) s19=00000000(0.000000) d09=0000000000000000(0.000000)
s20=00000000(0.000000) s21=00000000(0.000000) d10=0000000000000000(0.000000)
s22=00000000(0.000000) s23=00000000(0.000000) d11=0000000000000000(0.000000)
s24=00000000(0.000000) s25=00000000(0.000000) d12=0000000000000000(0.000000)
s26=00000000(0.000000) s27=00000000(0.000000) d13=0000000000000000(0.000000)
s28=00000000(0.000000) s29=00000000(0.000000) d14=0000000000000000(0.000000)
s30=00000000(0.000000) s31=00000000(0.000000) d15=0000000000000000(0.000000)
FPSCR: 00000000
Aborted

Now, I know that as usual,  I need time and patience to get more 
familiar with the emulated board and with U-boot requirements.

However, if any of you has suggestions for doing that or experience to 
share, your are most welcome!

   I will keep you posted in the next days and weeks.

   Cheers,

   Michael.

--
Michael Opdenacker, Free Electrons
Free Embedded Linux Training Materials
on http://free-electrons.com/training
(More than 1000 pages!)