Re: [Qemu-devel] Can't see network under qemu 0.5.5

[Leonard T. Erwine]

I tried this, but still to no avail. Nothing gets in and nothing gets
out of the qemu instance. Are you using Windows 98 for this?

On Thu, 2004-06-17 at 11:39, Marc Vertes wrote:
> Here is the /etc/qemu-ifup I use to perform full network configuration:
> 
> -----------------------------------------------------
> #!/bin/sh
> #
> # Inside the qemu VM, the following commands are required:
> #
> # ifconfig eth0 172.20.0.2
> # route add default gw 172.20.0.1
> #
> intf=$1
> eth0_ipaddr=$(ifconfig eth0 | awk '/inet addr:/ {print substr($2, 6)}')
> 
> sudo sh << EOT
> /sbin/ifconfig $intf 172.20.0.1
> /sbin/route add -host 172.20.0.2 $intf
> /usr/sbin/iptables -t nat -F
> /usr/sbin/iptables -t nat -A POSTROUTING -j SNAT -o eth0 --to $eth0_ipaddr
> echo 1 > /proc/sys/net/ipv4/ip_forward
> EOT
> ---------------------------------------------------
> 
> Marc
> 
> Ludovic Gele wrote:
> 
> >Selon "Leonard T. Erwine" <address@hidden>:
> >
> >>I have this problem with using qemu 0.5.5 under windows 98.
> >>
> >>I can ping the interface's own IP but can't see beyond that.
> >>
> >>I have screen captures of my settings and other relevant system data at
> >>http://www.lennyerwine.com/qemu-net.
> >>
> >>If anyone can help me with this problem, I will be GLAD to transform the
> >>aforementioned web page into a help document. If I can get past this, I
> >>plan on doing this for Win2K, Linux as well.
> >>
> >
> >Have you activate the ipforwarding on your host system? And the NAT?
> >
> >
> >
> >_______________________________________________
> >Qemu-devel mailing list
> >address@hidden
> >http://lists.nongnu.org/mailman/listinfo/qemu-devel
> >
> 
> 
> 
> 
> _______________________________________________
> Qemu-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/qemu-devel