[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Re: WINE with QEMU on PPC
From: |
Sander Nagtegaal |
Subject: |
[Qemu-devel] Re: WINE with QEMU on PPC |
Date: |
Mon, 07 Jun 2004 18:02:55 +0200 |
User-agent: |
KMail/1.5 |
address@hidden Emulation]$ qemu-i386
/home/azrael/Emulation/usr/bin/wineserver
/home/azrael/Emulation/usr/bin/wineserver: /lib/libc.so.6: version `GLIBC_2.2'
not found (required by /home/azrael/Emulation/usr/bin/wineserver)
/home/azrael/Emulation/usr/bin/wineserver: /lib/libc.so.6: version `GLIBC_2.3'
not found (required by /home/azrael/Emulation/usr/bin/wineserver)
/home/azrael/Emulation/usr/bin/wineserver: /lib/libc.so.6: version `GLIBC_2.2'
not found (required by /home/azrael/Emulation/usr/lib/libwine.so.1)
/home/azrael/Emulation/usr/bin/wineserver: /lib/libc.so.6: version `GLIBC_2.3'
not found (required by /home/azrael/Emulation/usr/lib/libwine_unicode.so.1)
I'm a step further. The 11 error was just that I didn't correctly put the LD
path with declare -x
Doing that solved my problem.
But now wineserver only can't find 4 pieces. Where to get them? I installed
every rpm you said and everything is found except for those 4.........
Op maandag 7 juni 2004 15:55, schreef u:
> On Mon, 2004-06-07 at 13:36, Sander Nagtegaal wrote:
> > -Put them in the target platform directory (mine is /home/ARCHS/rh_x86)
> > -Install the rpm's using rpm2cpio and cpio:
> > e.g.
> > $ rpm2cpio ash-0.3.8-8.i386.rpm | cpio -idv
> >
> > Just a small question. Can I give the target platform directory any name
> > I want? And then just change the dir? Or does it have to be a
> > /ARCHS/rh_x86 type of directory?
>
> It can be any name you like. I just mentioned the name I gave because it
> also occurs in the config file.
>
> On Mon, 2004-06-07 at 14:35, Sander Nagtegaal wrote:
> > groff: error while loading shared libraries:
> > /home/azrael/Emulation/usr/lib/libstdc++.so.5: ELF file data encoding not
> > big-endian
> >
> > Another thing is that when I now run a "man **** " command it gives
> > errors. All my man pages are not working anymore.........maybe some
> > declare path is wrong?
>
> I'm afraid that's normal: your LD_LIBRARY_PATH now points to the x86
> libraries. If you just open a new terminal window, and run "man" there,
> that should be OK.
> To avoid this kind of problem, I put my qemu-specific commands in shell
> scripts. The "declare" statements are only valid within the enviroment
> of the script, not outside it.
>
> On Mon, 2004-06-07 at 14:26, Sander Nagtegaal wrote:
> > address@hidden Emulation]$ qemu-i386 -L /home/azrael/Emulation
> > /home/azrael/Emulation/usr/bin/wineserver
> > qemu: uncaught target signal 11 (Segmentation fault) - exiting
> >
> > That's what I got trying to run winserver. What could be the problem?
>
> The wineserver error is a different issue. What qemu are you using? I am
> now using qemu-0.5.5, and wine-20040505; before, I used qemu-0.5.3 and
> wine-20040309.
> I have glibc-2.3.3 and I use gcc-3.3.2 for building.
> But I'm just a user, segfaults in qemu is something for the real
> qemu-guru's.
>
> Cheers,
>
> Wim
>
> > Op maandag 7 juni 2004 12:27, schreef u:
> > > In attachment my wine config file. Save it as ~/.wine/config
> > > and edit the "Path" entries under the [Drive ...] entries a bit so that
> > > all paths point to meaningful directories:
> > >
> > > [Drive C]
> > > "Path"="/home/ARCHS/rh_x86/usr/share/wine-c"
> > > "Type" = "hd"
> > > "Label" = "MS-DOS"
> > > "Filesystem" = "win95"
> > >
> > > [Drive D] "Path" = "/mnt/cdrom"
> > > "Type" = "cdrom"
> > > "Label" = "CD-Rom"
> > > "Filesystem" = "win95"
> > > ; make sure that device is correct and has proper permissions !
> > > "Device" = "/dev/cdrom"
> > >
> > > [Drive E] "Path" = "/tmp"
> > > "Type" = "hd"
> > > "Label" = "Tmp Drive"
> > > "Filesystem" = "win95"
> > >
> > > [Drive F] "Path" = "/home/wim"
> > > "Type" = "network"
> > > "Label" = "Home"
> > > "Filesystem" = "win95"
> > >
> > > [Drive G] "Path" = "/home/ARCHS/rh_x86"
> > > "Type" = "hd"
> > > "Label" = "MS-DOS"
> > > "Filesystem" = "win95"
> > >
> > > On Mon, 2004-06-07 at 10:53, Sander Nagtegaal wrote:
> > > > Op maandag 7 juni 2004 10:29, schreef u:
> > > > > -I assume you know how to set up wine (I mean adapting the
> > > > > ~/.wine/config file). My qemu-wine home directory is
> > > > > usr/share/wine-c in the target platform directory. If you like I
> > > > > can mail my .wine/config file.
> > > >
> > > > No......I do not know how to set up wine..That was my next problem
> > > > after I managed to let qemu run the "ls" file. Could you mail the
> > > > config or email me how to set it up? Thanks alot! You're a great
> > > > help. I'm going to try it!
- [Qemu-devel] Re: Qemu-devel Digest, Vol 15, Issue 19 - WINE with QEMU on non-86x processor?, Wim Vanderbauwhede, 2004/06/05
- Message not available
- [Qemu-devel] Re: Qemu-devel Digest, Vol 15, Issue 19 - WINE with QEMU on non-86x processor?, Wim Vanderbauwhede, 2004/06/07
- Message not available
- [Qemu-devel] Re: Qemu-devel Digest, Vol 15, Issue 19 - WINE with QEMU on non-86x processor?, Wim Vanderbauwhede, 2004/06/07
- Message not available
- [Qemu-devel] Re: WINE with QEMU on PPC, Wim Vanderbauwhede, 2004/06/07
- [Qemu-devel] Re: WINE with QEMU on PPC,
Sander Nagtegaal <=
- Re: [Qemu-devel] Re: WINE with QEMU on PPC, Mark Guertin, 2004/06/07
- [Qemu-devel] Re: WINE with QEMU on PPC, Wim Vanderbauwhede, 2004/06/07
- Message not available
- [Qemu-devel] Re: WINE with QEMU on PPC, Sander Nagtegaal, 2004/06/07
- Re: [Qemu-devel] Re: WINE with QEMU on PPC, Sander Nagtegaal, 2004/06/07
- [Qemu-devel] Re: WINE with QEMU on PPC, Wim Vanderbauwhede, 2004/06/08
- [Qemu-devel] Re: WINE with QEMU on PPC, Sander Nagtegaal, 2004/06/08
- Message not available
- Message not available
- [Qemu-devel] Re: WINE with QEMU on PPC: importance of gcc/glibc versions?, Wim Vanderbauwhede, 2004/06/09
Message not available