[Qemu-commits] [COMMIT 6c0bd6b] MAX7310 I2C qdev conversion

[Anthony Liguori]

From: Paul Brook <address@hidden>

Signed-off-by: Paul Brook <address@hidden>

diff --git a/hw/i2c.h b/hw/i2c.h
index 7958b0e..6d223ea 100644
--- a/hw/i2c.h
+++ b/hw/i2c.h
@@ -75,7 +75,6 @@ MAX111xState *max1111_init(qemu_irq cb);
 void max111x_set_input(MAX111xState *s, int line, uint8_t value);
 
 /* max7310.c */
-i2c_slave *max7310_init(i2c_bus *bus);
 void max7310_reset(i2c_slave *i2c);
 qemu_irq *max7310_gpio_in_get(i2c_slave *i2c);
 void max7310_gpio_out_set(i2c_slave *i2c, int line, qemu_irq handler);
diff --git a/hw/max7310.c b/hw/max7310.c
index f2a4b1b..69ede32 100644
--- a/hw/max7310.c
+++ b/hw/max7310.c
@@ -7,7 +7,6 @@
  * This file is licensed under GNU GPL.
  */
 
-#include "hw.h"
 #include "i2c.h"
 
 typedef struct {
@@ -191,21 +190,16 @@ static void max7310_gpio_set(void *opaque, int line, int 
level)
 
 /* MAX7310 is SMBus-compatible (can be used with only SMBus protocols),
  * but also accepts sequences that are not SMBus so return an I2C device.  */
-i2c_slave *max7310_init(i2c_bus *bus)
+static void max7310_init(i2c_slave *i2c)
 {
-    MAX7310State *s = (MAX7310State *)
-            i2c_slave_init(bus, 0, sizeof(MAX7310State));
-    s->i2c.event = max7310_event;
-    s->i2c.recv = max7310_rx;
-    s->i2c.send = max7310_tx;
+    MAX7310State *s = FROM_I2C_SLAVE(MAX7310State, i2c);
+
     s->gpio_in = qemu_allocate_irqs(max7310_gpio_set, s,
                     ARRAY_SIZE(s->handler));
 
     max7310_reset(&s->i2c);
 
     register_savevm("max7310", -1, 0, max7310_save, max7310_load, s);
-
-    return &s->i2c;
 }
 
 qemu_irq *max7310_gpio_in_get(i2c_slave *i2c)
@@ -222,3 +216,17 @@ void max7310_gpio_out_set(i2c_slave *i2c, int line, 
qemu_irq handler)
 
     s->handler[line] = handler;
 }
+
+static I2CSlaveInfo max7310_info = {
+    .init = max7310_init,
+    .event = max7310_event,
+    .recv = max7310_rx,
+    .send = max7310_tx
+};
+
+static void max7310_register_devices(void)
+{
+    i2c_register_slave("max7310", sizeof(MAX7310State), &max7310_info);
+}
+
+device_init(max7310_register_devices)
diff --git a/hw/spitz.c b/hw/spitz.c
index d22174e..943302b 100644
--- a/hw/spitz.c
+++ b/hw/spitz.c
@@ -759,8 +759,8 @@ static void spitz_i2c_setup(PXA2xxState *cpu)
 static void spitz_akita_i2c_setup(PXA2xxState *cpu)
 {
     /* Attach a Max7310 to Akita I2C bus.  */
-    i2c_set_slave_address(max7310_init(pxa2xx_i2c_bus(cpu->i2c[0])),
-                    AKITA_MAX_ADDR);
+    i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",
+                     AKITA_MAX_ADDR);
 }
 
 /* Other peripherals */