[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH v11 03/10] hw/arm/virt: Split the memory map descr
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-arm] [PATCH v11 03/10] hw/arm/virt: Split the memory map description |
Date: |
Fri, 1 Mar 2019 16:55:33 +0100 |
On Fri, 1 Mar 2019 14:47:02 +0100
Eric Auger <address@hidden> wrote:
> In the prospect to introduce an extended memory map supporting more
> RAM, let's split the memory map array into two parts:
>
> - the former a15memmap, renamed base_memmap, contains regions below
> and including the RAM. MemMapEntries initialized in this array
> have a static size and base address.
> - extended_memmap, only initialized with entries located after the
> RAM. MemMapEntries initialized in this array only get their size
> initialized. Their base address is dynamically computed depending
> on the the top of the RAM, with same alignment as their size.
>
> Eventually base_memmap entries are copied into the extended_memmap
> array. Using two separate arrays however clarifies which entries
> are statically allocated and those which are dynamically allocated.
>
> This new split will allow to grow the RAM size without changing the
> description of the high IO entries.
>
> We introduce a new virt_set_memmap() helper function which
> "freezes" the memory map. We call it in machvirt_init as
> memory attributes of the machine are not yet set when
> virt_instance_init() gets called.
>
> The memory map is unchanged (the top of the initial RAM still is
> 256GiB). Then come the high IO regions with same layout as before.
>
> Signed-off-by: Eric Auger <address@hidden>
with nits fixed or not:
Reviewed-by: Igor Mammedov <address@hidden>
>
> ---
> v10 -> v11:
> - remove vms->high_io_base
> - initialize vms->memmamp to NULL in the instance_init
>
> v8 -> v9:
> - restore virt_set_memmap call in machvirt_init as otherwise it does
> not work in TCG mode
>
> v7 -> v8:
> - removed Peter's R-b due to the changes induced by Igor's comments
> - call set_memmap back in virt_instance_init
> - add comments about sizing of extended_memmap
> - s/region/entries as suggested by Igor
> - rewording of the commit message
>
> v6 -> v7:
> - s/a15memmap/base_memmap
> - slight rewording of the commit message
> - add "if there is less than 256GiB of RAM then the floating area
> starts at the 256GiB mark" in the comment associated to the floating
> memory map
> - Added Peter's R-b
>
> v5 -> v6
> - removal of many macros in units.h
> - introduce the virt_set_memmap helper
> - new computation for offsets of high IO regions
> - add comments
> ---
> hw/arm/virt.c | 51 ++++++++++++++++++++++++++++++++++++++-----
> include/hw/arm/virt.h | 13 +++++++----
> 2 files changed, 54 insertions(+), 10 deletions(-)
>
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index 892bae4f3a..1c213eb3c9 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -29,6 +29,7 @@
> */
>
> #include "qemu/osdep.h"
> +#include "qemu/units.h"
> #include "qapi/error.h"
> #include "hw/sysbus.h"
> #include "hw/arm/arm.h"
> @@ -121,7 +122,7 @@
> * Note that devices should generally be placed at multiples of 0x10000,
> * to accommodate guests using 64K pages.
> */
> -static const MemMapEntry a15memmap[] = {
> +static const MemMapEntry base_memmap[] = {
> /* Space up to 0x8000000 is reserved for a boot ROM */
> [VIRT_FLASH] = { 0, 0x08000000 },
> [VIRT_CPUPERIPHS] = { 0x08000000, 0x00020000 },
> @@ -149,11 +150,24 @@ static const MemMapEntry a15memmap[] = {
> [VIRT_PCIE_PIO] = { 0x3eff0000, 0x00010000 },
> [VIRT_PCIE_ECAM] = { 0x3f000000, 0x01000000 },
> [VIRT_MEM] = { 0x40000000,
},
> +};
> +
> +/*
> + * Highmem IO Regions: This memory map is floating, located after the RAM.
> + * Each MemMapEntry base (GPA) will be dynamically computed, depending on the
> + * top of the RAM, so that its base get the same alignment as the size,
> + * ie. a 512GiB entry will be aligned on a 512GiB boundary. If there is
> + * less than 256GiB of RAM, the floating area starts at the 256GiB mark.
> + * Note the extended_memmap is sized so that it eventually also includes the
> + * base_memmap entries (VIRT_HIGH_GIC_REDIST2 index is greater than the last
> + * index of base_memmap).
> + */
> +static MemMapEntry extended_memmap[] = {
> /* Additional 64 MB redist region (can contain up to 512 redistributors)
> */
> - [VIRT_HIGH_GIC_REDIST2] = { 0x4000000000ULL, 0x4000000 },
> - [VIRT_HIGH_PCIE_ECAM] = { 0x4010000000ULL, 0x10000000 },
> - /* Second PCIe window, 512GB wide at the 512GB boundary */
> - [VIRT_HIGH_PCIE_MMIO] = { 0x8000000000ULL, 0x8000000000ULL },
> + [VIRT_HIGH_GIC_REDIST2] = { 0x0, 64 * MiB },
> + [VIRT_HIGH_PCIE_ECAM] = { 0x0, 256 * MiB },
> + /* Second PCIe window */
> + [VIRT_HIGH_PCIE_MMIO] = { 0x0, 512 * GiB },
> };
>
> static const int a15irqmap[] = {
> @@ -1354,6 +1368,29 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState
> *vms, int idx)
> return arm_cpu_mp_affinity(idx, clustersz);
> }
>
> +static void virt_set_memmap(VirtMachineState *vms)
> +{
> + hwaddr base;
> + int i;
> +
> + vms->memmap = extended_memmap;
> +
> + for (i = 0; i < ARRAY_SIZE(base_memmap); i++) {
> + vms->memmap[i] = base_memmap[i];
> + }
> +
> + base = 256 * GiB; /* Top of the legacy initial RAM region */
nit:
like you suggested, maybe use here [VIRT_MEM] + RAMLIMIT_BYTES
> +
> + for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
> + hwaddr size = extended_memmap[i].size;
> +
> + base = ROUND_UP(base, size);
> + vms->memmap[i].base = base;
> + vms->memmap[i].size = size;
> + base += size;
> + }
> +}
> +
> static void machvirt_init(MachineState *machine)
> {
> VirtMachineState *vms = VIRT_MACHINE(machine);
> @@ -1368,6 +1405,8 @@ static void machvirt_init(MachineState *machine)
> bool firmware_loaded = bios_name || drive_get(IF_PFLASH, 0, 0);
> bool aarch64 = true;
>
> + virt_set_memmap(vms);
> +
> /* We can probe only here because during property set
> * KVM is not available yet
> */
> @@ -1845,7 +1884,7 @@ static void virt_instance_init(Object *obj)
> "Valid values are none and smmuv3",
> NULL);
>
> - vms->memmap = a15memmap;
> + vms->memmap = NULL;
nit:
it's sufficient to just remove this line as objects a guarantied to be 0
initialized
> vms->irqmap = a15irqmap;
> }
>
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index a27086d524..f3f7fae4ac 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -64,7 +64,6 @@ enum {
> VIRT_GIC_VCPU,
> VIRT_GIC_ITS,
> VIRT_GIC_REDIST,
> - VIRT_HIGH_GIC_REDIST2,
> VIRT_SMMU,
> VIRT_UART,
> VIRT_MMIO,
> @@ -74,12 +73,18 @@ enum {
> VIRT_PCIE_MMIO,
> VIRT_PCIE_PIO,
> VIRT_PCIE_ECAM,
> - VIRT_HIGH_PCIE_ECAM,
> VIRT_PLATFORM_BUS,
> - VIRT_HIGH_PCIE_MMIO,
> VIRT_GPIO,
> VIRT_SECURE_UART,
> VIRT_SECURE_MEM,
> + VIRT_LOWMEMMAP_LAST,
> +};
> +
> +/* indices of IO regions located after the RAM */
> +enum {
> + VIRT_HIGH_GIC_REDIST2 = VIRT_LOWMEMMAP_LAST,
> + VIRT_HIGH_PCIE_ECAM,
> + VIRT_HIGH_PCIE_MMIO,
> };
>
> typedef enum VirtIOMMUType {
> @@ -116,7 +121,7 @@ typedef struct {
> int32_t gic_version;
> VirtIOMMUType iommu;
> struct arm_boot_info bootinfo;
> - const MemMapEntry *memmap;
> + MemMapEntry *memmap;
> const int *irqmap;
> int smp_cpus;
> void *fdt;
- [Qemu-arm] [PATCH v11 00/10] ARM virt: Initial RAM expansion and extended memory map, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 01/10] hw/arm/boot: introduce fdt_add_memory_node helper, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 02/10] hw/arm/virt: Rename highmem IO regions, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 03/10] hw/arm/virt: Split the memory map description, Eric Auger, 2019/03/01
- Re: [Qemu-arm] [PATCH v11 03/10] hw/arm/virt: Split the memory map description,
Igor Mammedov <=
- [Qemu-arm] [PATCH v11 04/10] hw/boards: Add a MachineState parameter to kvm_type callback, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 06/10] vl: Set machine ram_size, maxram_size and ram_slots earlier, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 05/10] kvm: add kvm_arm_get_max_vm_ipa_size, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 08/10] hw/arm/virt: Implement kvm_type function for 4.0 machine, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 09/10] hw/arm/virt: Check the VCPU PA range in TCG mode, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 10/10] hw/arm/virt: Bump the 255GB initial RAM limit, Eric Auger, 2019/03/01
- [Qemu-arm] [PATCH v11 07/10] hw/arm/virt: Dynamic memory map depending on RAM requirements, Eric Auger, 2019/03/01