qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [PATCH v6 05/16] gdbstub: add multiprocess support to vCo


From: Edgar E. Iglesias
Subject: Re: [Qemu-arm] [PATCH v6 05/16] gdbstub: add multiprocess support to vCont packets
Date: Fri, 16 Nov 2018 10:57:00 +0100
User-agent: Mutt/1.9.4 (2018-02-28)

On Thu, Nov 15, 2018 at 10:41:56AM +0100, Luc Michel wrote:
> Add the gdb_first_cpu() and gdb_next_cpu() to iterate over all
> the CPUs in currently attached processes.
> 
> Add the gdb_first_cpu_in_process() and gdb_next_cpu_in_process() to
> iterate over CPUs of a given process.
> 
> Use them to add multiprocess extension support to vCont packets.
> 
> Signed-off-by: Luc Michel <address@hidden>
> Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
> ---
>  gdbstub.c | 117 +++++++++++++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 102 insertions(+), 15 deletions(-)
> 
> diff --git a/gdbstub.c b/gdbstub.c
> index fa2b7077b2..f1ec3481cb 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -716,10 +716,40 @@ static CPUState *find_cpu(uint32_t thread_id)
>      }
>  
>      return NULL;
>  }
>  
> +static CPUState *get_first_cpu_in_process(const GDBState *s,
> +                                          GDBProcess *process)
> +{
> +    CPUState *cpu;
> +
> +    CPU_FOREACH(cpu) {
> +        if (gdb_get_cpu_pid(s, cpu) == process->pid) {
> +            return cpu;
> +        }
> +    }
> +
> +    return NULL;
> +}
> +
> +static CPUState *gdb_next_cpu_in_process(const GDBState *s, CPUState *cpu)
> +{
> +    uint32_t pid = gdb_get_cpu_pid(s, cpu);
> +    cpu = CPU_NEXT(cpu);
> +
> +    while (cpu) {
> +        if (gdb_get_cpu_pid(s, cpu) == pid) {
> +            break;
> +        }
> +
> +        cpu = CPU_NEXT(cpu);
> +    }
> +
> +    return cpu;
> +}
> +
>  static CPUState *gdb_get_cpu(const GDBState *s, uint32_t pid, uint32_t tid)
>  {
>      GDBProcess *process;
>      CPUState *cpu = find_cpu(tid);
>  
> @@ -743,10 +773,41 @@ static CPUState *gdb_get_cpu(const GDBState *s, 
> uint32_t pid, uint32_t tid)
>      }
>  
>      return cpu;
>  }
>  
> +/* Return the cpu following @cpu, while ignoring
> + * unattached processes.
> + */
> +static CPUState *gdb_next_cpu(const GDBState *s, CPUState *cpu)

Perhaps a better name would be gdb_next_attached_cpu() ?

With that name change:
Reviewed-by: Edgar E. Iglesias <address@hidden>




> +{
> +    cpu = CPU_NEXT(cpu);
> +
> +    while (cpu) {
> +        if (gdb_get_cpu_process(s, cpu)->attached) {
> +            break;
> +        }
> +
> +        cpu = CPU_NEXT(cpu);
> +    }
> +
> +    return cpu;
> +}
> +
> +/* Return the first attached cpu */
> +static CPUState *gdb_first_cpu(const GDBState *s)
> +{
> +    CPUState *cpu = first_cpu;
> +    GDBProcess *process = gdb_get_cpu_process(s, cpu);
> +
> +    if (!process->attached) {
> +        return gdb_next_cpu(s, cpu);
> +    }
> +
> +    return cpu;
> +}
> +
>  static const char *get_feature_xml(const char *p, const char **newp,
>                                     CPUClass *cc)
>  {
>      size_t len;
>      int i;
> @@ -1081,14 +1142,16 @@ static int is_query_packet(const char *p, const char 
> *query, char separator)
>   * returns -ENOTSUP if a command is unsupported, -EINVAL or -ERANGE if there 
> is
>   *         a format error, 0 on success.
>   */
>  static int gdb_handle_vcont(GDBState *s, const char *p)
>  {
> -    int res, idx, signal = 0;
> +    int res, signal = 0;
>      char cur_action;
>      char *newstates;
>      unsigned long tmp;
> +    uint32_t pid, tid;
> +    GDBProcess *process;
>      CPUState *cpu;
>  #ifdef CONFIG_USER_ONLY
>      int max_cpus = 1; /* global variable max_cpus exists only in system mode 
> */
>  
>      CPU_FOREACH(cpu) {
> @@ -1127,29 +1190,52 @@ static int gdb_handle_vcont(GDBState *s, const char 
> *p)
>          } else if (cur_action != 'c' && cur_action != 's') {
>              /* unknown/invalid/unsupported command */
>              res = -ENOTSUP;
>              goto out;
>          }
> -        /* thread specification. special values: (none), -1 = all; 0 = any */
> -        if ((p[0] == ':' && p[1] == '-' && p[2] == '1') || (p[0] != ':')) {
> -            if (*p == ':') {
> -                p += 3;
> -            }
> -            for (idx = 0; idx < max_cpus; idx++) {
> -                if (newstates[idx] == 1) {
> -                    newstates[idx] = cur_action;
> +
> +        if (*p++ != ':') {
> +            res = -ENOTSUP;
> +            goto out;
> +        }
> +
> +        switch (read_thread_id(p, &p, &pid, &tid)) {
> +        case GDB_READ_THREAD_ERR:
> +            res = -EINVAL;
> +            goto out;
> +
> +        case GDB_ALL_PROCESSES:
> +            cpu = gdb_first_cpu(s);
> +            while (cpu) {
> +                if (newstates[cpu->cpu_index] == 1) {
> +                    newstates[cpu->cpu_index] = cur_action;
>                  }
> +
> +                cpu = gdb_next_cpu(s, cpu);
>              }
> -        } else if (*p == ':') {
> -            p++;
> -            res = qemu_strtoul(p, &p, 16, &tmp);
> -            if (res) {
> +            break;
> +
> +        case GDB_ALL_THREADS:
> +            process = gdb_get_process(s, pid);
> +
> +            if (!process->attached) {
> +                res = -EINVAL;
>                  goto out;
>              }
>  
> -            /* 0 means any thread, so we pick the first valid CPU */
> -            cpu = tmp ? find_cpu(tmp) : first_cpu;
> +            cpu = get_first_cpu_in_process(s, process);
> +            while (cpu) {
> +                if (newstates[cpu->cpu_index] == 1) {
> +                    newstates[cpu->cpu_index] = cur_action;
> +                }
> +
> +                cpu = gdb_next_cpu_in_process(s, cpu);
> +            }
> +            break;
> +
> +        case GDB_ONE_THREAD:
> +            cpu = gdb_get_cpu(s, pid, tid);
>  
>              /* invalid CPU/thread specified */
>              if (!cpu) {
>                  res = -EINVAL;
>                  goto out;
> @@ -1157,10 +1243,11 @@ static int gdb_handle_vcont(GDBState *s, const char 
> *p)
>  
>              /* only use if no previous match occourred */
>              if (newstates[cpu->cpu_index] == 1) {
>                  newstates[cpu->cpu_index] = cur_action;
>              }
> +            break;
>          }
>      }
>      s->signal = signal;
>      gdb_continue_partial(s, newstates);
>  
> -- 
> 2.19.1
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]