qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-arm] [PATCH v5 0/2] arm: Add first models of Xilinx Versal SoC


From: Edgar E. Iglesias
Subject: [Qemu-arm] [PATCH v5 0/2] arm: Add first models of Xilinx Versal SoC
Date: Fri, 2 Nov 2018 14:19:11 +0100

This patch series adds initial support for Xilinx's Versal SoC.
Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar
Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with
leading-edge memory and interfacing technologies to deliver powerful
heterogeneous acceleration for any application. The Versal AI Core series has
five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm
Cortex-A72 application processors, dual-core Arm Cortex-R5 real-time
processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines
optimized for high-precision floating point with low latency.

More info can be found here:
https://www.xilinx.com/news/press/2018/xilinx-unveils-versal-the-first-in-a-new-category-of-platforms-delivering-rapid-innovation-with-software-programmability-and-scalable-ai-inference.html


In QEMU we'd like to have a virtual developer board with the Versal SoC
and a selected set of peripherals under the control of QEMU.
We'd like to gradually extend this board as QEMU gains more support
for Versal hardware components. QEMU will generate a device-tree
describing only the components it supports and includes in the virtual
dev board.

Before adding Versal support, this series starts with a few fixes to the
GEM that I ran into when running recent kernels on the Versal and ZynqMP
models.

I also noticed a problem with HVC insns not being enabled when using
QEMU's PSCI implementation on CPU's with EL2 and EL3 enabled. This causes
problems for Linux/KVM guests, also fixed in this series.

Best regards,
Edgar

ChangeLog:
v4 -> v5:
* Correct setting of boolean full-duplex fdt property

v3 -> v4:
* Improve error handling for CPU and GIC creation
* Remove KVM checks in GIC creation

v2 -> v3:
* Fix DESCONF6 queue mask generation for GEMs with only one queue.

v1 -> v2:
* Spell out OCM as On Chip Memory
* apperture -> aperture
* Remove copy+pasted virt board comment
* Remove VMSD for Versal SoC (with a comment on why it's not needed)
* Embedd AddressSpace dma object in GEM
* Remove debug left-overs in arm-powerctl
* Enable PMU in Cortex-A72
* Rename cortex_a57_a53_cp_reginfo -> cortex_a72_a57_a53_cp_reginfo


Edgar E. Iglesias (2):
  hw/arm: versal: Add a model of Xilinx Versal SoC
  hw/arm: versal: Add a virtual Xilinx Versal board

 default-configs/aarch64-softmmu.mak |   1 +
 hw/arm/Makefile.objs                |   1 +
 hw/arm/xlnx-versal-virt.c           | 494 ++++++++++++++++++++++++++++
 hw/arm/xlnx-versal.c                | 323 ++++++++++++++++++
 include/hw/arm/xlnx-versal.h        | 122 +++++++
 5 files changed, 941 insertions(+)
 create mode 100644 hw/arm/xlnx-versal-virt.c
 create mode 100644 hw/arm/xlnx-versal.c
 create mode 100644 include/hw/arm/xlnx-versal.h

-- 
2.17.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]