[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [Qemu-devel] [RFC v5 4/4] hw/intc/arm_gicv3_its: Allow sa
From: |
Shannon Zhao |
Subject: |
Re: [Qemu-arm] [Qemu-devel] [RFC v5 4/4] hw/intc/arm_gicv3_its: Allow save/restore |
Date: |
Fri, 19 May 2017 18:30:27 +0800 |
User-agent: |
Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.4.0 |
On 2017/4/14 20:46, Eric Auger wrote:
> We change the restoration priority of both the GICv3 and ITS. The
> GICv3 must be restored before the ITS and the ITS needs to be restored
> before PCIe devices since it translates their MSI transactions.
>
> Signed-off-by: Eric Auger <address@hidden>
> Reviewed-by: Juan Quintela <address@hidden>
>
> ---
> v2 -> v3:
> - reword migration blocker message
> - remove unmigratable setting to false
>
> v1 -> v2:
> - handle case where migrate_add_blocker fails
> - add comments along with ITS and GICv3 migration priorities
> ---
> hw/intc/arm_gicv3_common.c | 1 +
> hw/intc/arm_gicv3_its_common.c | 2 +-
> hw/intc/arm_gicv3_its_kvm.c | 24 ++++++++++++------------
> include/migration/vmstate.h | 2 ++
> 4 files changed, 16 insertions(+), 13 deletions(-)
>
> diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
> index c6493d6..4228b7c 100644
> --- a/hw/intc/arm_gicv3_common.c
> +++ b/hw/intc/arm_gicv3_common.c
> @@ -145,6 +145,7 @@ static const VMStateDescription vmstate_gicv3 = {
> .minimum_version_id = 1,
> .pre_save = gicv3_pre_save,
> .post_load = gicv3_post_load,
> + .priority = MIG_PRI_GICV3,
> .fields = (VMStateField[]) {
> VMSTATE_UINT32(gicd_ctlr, GICv3State),
> VMSTATE_UINT32_ARRAY(gicd_statusr, GICv3State, 2),
> diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c
> index efab8c7..22ce4c4 100644
> --- a/hw/intc/arm_gicv3_its_common.c
> +++ b/hw/intc/arm_gicv3_its_common.c
> @@ -48,7 +48,7 @@ static const VMStateDescription vmstate_its = {
> .name = "arm_gicv3_its",
> .pre_save = gicv3_its_pre_save,
> .post_load = gicv3_its_post_load,
> - .unmigratable = true,
> + .priority = MIG_PRI_GICV3_ITS,
> .fields = (VMStateField[]) {
> VMSTATE_UINT32(ctlr, GICv3ITSState),
> VMSTATE_UINT32(iidr, GICv3ITSState),
> diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c
> index 7c5502c..8401d2f 100644
> --- a/hw/intc/arm_gicv3_its_kvm.c
> +++ b/hw/intc/arm_gicv3_its_kvm.c
> @@ -77,18 +77,6 @@ static void kvm_arm_its_realize(DeviceState *dev, Error
> **errp)
> GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
> Error *local_err = NULL;
>
> - /*
> - * Block migration of a KVM GICv3 ITS device: the API for saving and
> - * restoring the state in the kernel is not yet available
> - */
> - error_setg(&s->migration_blocker, "vITS migration is not implemented");
> - migrate_add_blocker(s->migration_blocker, &local_err);
> - if (local_err) {
> - error_propagate(errp, local_err);
> - error_free(s->migration_blocker);
> - return;
> - }
> -
> s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_ITS,
> false);
> if (s->dev_fd < 0) {
> error_setg_errno(errp, -s->dev_fd, "error creating in-kernel ITS");
> @@ -105,6 +93,18 @@ static void kvm_arm_its_realize(DeviceState *dev, Error
> **errp)
>
> gicv3_its_init_mmio(s, NULL);
>
> + if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_ITS_REGS,
> + GITS_CTLR)) {
> + error_setg(&s->migration_blocker, "This operating system kernel "
> + "does not support vGICv3 migration");
s/vGICv3/vITS
> + migrate_add_blocker(s->migration_blocker, &local_err);
> + if (local_err) {
> + error_propagate(errp, local_err);
> + error_free(s->migration_blocker);
> + return;
> + }
> + }
> +
> kvm_msi_use_devid = true;
> kvm_gsi_direct_mapping = false;
> kvm_msi_via_irqfd_allowed = kvm_irqfds_enabled();
> diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h
> index f2dbf84..8dab9c7 100644
> --- a/include/migration/vmstate.h
> +++ b/include/migration/vmstate.h
> @@ -198,6 +198,8 @@ enum VMStateFlags {
> typedef enum {
> MIG_PRI_DEFAULT = 0,
> MIG_PRI_IOMMU, /* Must happen before PCI devices */
> + MIG_PRI_GICV3_ITS, /* Must happen before PCI devices */
> + MIG_PRI_GICV3, /* Must happen before the ITS */
> MIG_PRI_MAX,
> } MigrationPriority;
>
>
Thanks,
--
Shannon
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-arm] [Qemu-devel] [RFC v5 4/4] hw/intc/arm_gicv3_its: Allow save/restore,
Shannon Zhao <=