[Qemu-arm] [PATCH v9 25/25] tcg: enable MTTCG by default for ARM on x86 hosts

[Alex Bennée]

This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:

  - The ARM translate.c/translate-64.c have been converted to
    - use MTTCG safe atomic primitives
    - emit the appropriate barrier ops
  - The ARM machine has been updated to
    - hold the BQL when modifying shared cross-vCPU state
    - defer cpu_reset to async safe work

All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.

Signed-off-by: Alex Bennée <address@hidden>
Reviewed-by: Richard Henderson <address@hidden>
---
v7
  - drop configure check for backend
  - declare backend memory order for x86
  - declare guest memory order for ARM
  - add configure snippet to set TARGET_SUPPORTS_MTTCG
v8
  - TCG_DEFAULT_MO -> TCG_GUEST_DEFAULT_MO
  - ~TCG_MO_LD_ST -> ~TCG_MO_ST_LD
---
 configure             |  6 ++++++
 cpus.c                |  4 ++--
 target/arm/cpu.h      |  3 +++
 tcg/i386/tcg-target.h | 11 +++++++++++
 4 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/configure b/configure
index 86fd833feb..9f2a665f5b 100755
--- a/configure
+++ b/configure
@@ -5879,6 +5879,7 @@ mkdir -p $target_dir
 echo "# Automatically generated by configure - do not modify" > 
$config_target_mak
 
 bflt="no"
+mttcg="no"
 interp_prefix1=$(echo "$interp_prefix" | sed "s/%M/$target_name/g")
 gdb_xml_files=""
 
@@ -5897,11 +5898,13 @@ case "$target_name" in
   arm|armeb)
     TARGET_ARCH=arm
     bflt="yes"
+    mttcg="yes"
     gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
   ;;
   aarch64)
     TARGET_BASE_ARCH=arm
     bflt="yes"
+    mttcg="yes"
     gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml 
arm-vfp3.xml arm-neon.xml"
   ;;
   cris)
@@ -6066,6 +6069,9 @@ if test "$target_bigendian" = "yes" ; then
 fi
 if test "$target_softmmu" = "yes" ; then
   echo "CONFIG_SOFTMMU=y" >> $config_target_mak
+  if test "$mttcg" = "yes" ; then
+    echo "TARGET_SUPPORTS_MTTCG=y" >> $config_target_mak
+  fi
 fi
 if test "$target_user_only" = "yes" ; then
   echo "CONFIG_USER_ONLY=y" >> $config_target_mak
diff --git a/cpus.c b/cpus.c
index e3d9f3fe21..e1b82bcd49 100644
--- a/cpus.c
+++ b/cpus.c
@@ -176,8 +176,8 @@ bool mttcg_enabled;
 
 static bool check_tcg_memory_orders_compatible(void)
 {
-#if defined(TCG_DEFAULT_MO) && defined(TCG_TARGET_DEFAULT_MO)
-    return (TCG_DEFAULT_MO & ~TCG_TARGET_DEFAULT_MO) == 0;
+#if defined(TCG_GUEST_DEFAULT_MO) && defined(TCG_TARGET_DEFAULT_MO)
+    return (TCG_GUEST_DEFAULT_MO & ~TCG_TARGET_DEFAULT_MO) == 0;
 #else
     return false;
 #endif
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index a3c4d07817..0ef31db3e0 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -30,6 +30,9 @@
 #  define TARGET_LONG_BITS 32
 #endif
 
+/* ARM processors have a weak memory model */
+#define TCG_GUEST_DEFAULT_MO      (0)
+
 #define CPUArchState struct CPUARMState
 
 #include "qemu-common.h"
diff --git a/tcg/i386/tcg-target.h b/tcg/i386/tcg-target.h
index 21d96ec35c..4275787db9 100644
--- a/tcg/i386/tcg-target.h
+++ b/tcg/i386/tcg-target.h
@@ -165,4 +165,15 @@ static inline void flush_icache_range(uintptr_t start, 
uintptr_t stop)
 {
 }
 
+/* This defines the natural memory order supported by this
+ * architecture before guarantees made by various barrier
+ * instructions.
+ *
+ * The x86 has a pretty strong memory ordering which only really
+ * allows for some stores to be re-ordered after loads.
+ */
+#include "tcg-mo.h"
+
+#define TCG_TARGET_DEFAULT_MO (TCG_MO_ALL & ~TCG_MO_ST_LD)
+
 #endif
-- 
2.11.0