[Qemu-arm] [PATCH 0/2] Add ASPEED SCU device

[Andrew Jeffery]

Hi all,

These are two patches implementing minimal functionality for the ASPEED System
Control Unit device and integrating it into the AST2400 SoC model. The device is
critical for initialisation of u-boot and the kernel as it provides chip level
control registers, influencing the configuration of the software and the
software's configuration of the SoC.

Cheers,

Andrew

Andrew Jeffery (2):
  hw/misc: Add a model for the ASPEED System Control Unit
  ast2400: Integrate the SCU model and configure reset values

 hw/arm/ast2400.c             |  57 +++++++++++++++++
 hw/misc/Makefile.objs        |   1 +
 hw/misc/aspeed_scu.c         | 147 +++++++++++++++++++++++++++++++++++++++++++
 include/hw/arm/ast2400.h     |   2 +
 include/hw/misc/aspeed_scu.h | 108 +++++++++++++++++++++++++++++++
 trace-events                 |   3 +
 6 files changed, 318 insertions(+)
 create mode 100644 hw/misc/aspeed_scu.c
 create mode 100644 include/hw/misc/aspeed_scu.h

-- 
2.7.4