[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-arm] [PATCH v9 0/5] add ACPI node for fw_cfg on pc and arm
From: |
Gabriel L. Somlo |
Subject: |
[Qemu-arm] [PATCH v9 0/5] add ACPI node for fw_cfg on pc and arm |
Date: |
Fri, 19 Feb 2016 13:20:24 -0500 |
Generate an ACPI DSDT node for fw_cfg on pc and arm guests.
New since v8:
- patch 3/5: on pc/x86, place FWCF node in scope \_SB.PCI0
(instead of directly under \_SB), to prevent any possible
resource conflict as might be observed by Windows
(thanks again to Igor Mammedov for the suggestion!)
Thanks,
--Gabriel
>New since v7:
>
> - edited commit blurb on 3/5 to match updated content, i.e. that
> the ACPI node is now inserted into the DSDT (no longer the SSDT).
> (Thanks to Igor Mammedov for catching that!)
>
>>New since v6:
>> - rebased to fit on top of fb306ff and f264d36, which moved things
>> around in pc's acpi-build.c (only patch 3/5 affected);
>> - kernel-side fw_cfg sysfs driver accepted into upstream linux
>>
>>>New since v5:
>>>
>>> - rebased on top of latest QEMU git master
>>>
>>>>New since v4:
>>>>
>>>> - rebased on top of Marc's DMA series
>>>> - drop machine compat dependency for insertion into x86/ssdt
>>>> (patch 3/5), following agreement between Igor and Eduardo
>>>> - [mm]io register range now covers DMA register as well, if
>>>> available.
>>>> - s/bios/firmware in doc file updates
>>>>
>>>>>New since v3:
>>>>>
>>>>> - rebased to work on top of 87e896ab (introducing pc-*-25 classes),
>>>>> inserting fw_cfg acpi node only for machines >= 2.5.
>>>>>
>>>>> - reintroduce _STA with value 0x0B (bit 2 for u/i visibility turned
>>>>> off to avoid Windows complaining -- thanks Igor for catching that!)
>>>>>
>>>>>If there's any other feedback besides questions regarding the
>>>>>appropriateness of "QEMU0002" as the value of _HID, please don't hesitate!
>>>>>
>>>>>>New since v2:
>>>>>>
>>>>>> - pc/i386 node in ssdt only on machine types *newer* than 2.4
>>>>>> (as suggested by Eduardo)
>>>>>>
>>>>>>I appreciate any further comments and reviews. Hopefully we can make
>>>>>>this palatable for upstream, modulo the lingering concerns about whether
>>>>>>"QEMU0002" is ok to use as the value of _HID, which I'll hopefully get
>>>>>>sorted out with the kernel crew...
>>>>>>
>>>>>>>New since v1:
>>>>>>>
>>>>>>> - expose control register size (suggested by Marc MarĂ)
>>>>>>>
>>>>>>> - leaving out _UID and _STA fields (thanks Shannon & Igor)
>>>>>>>
>>>>>>> - using "QEMU0002" as the value of _HID (thanks Michael)
>>>>>>>
>>>>>>> - added documentation blurb to docs/specs/fw_cfg.txt
>>>>>>> (mainly to record usage of the "QEMU0002" string with fw_cfg).
>>>>>>>
>>>>>>>> This series adds a fw_cfg device node to the SSDT (on pc), or to the
>>>>>>>> DSDT (on arm).
>>>>>>>>
>>>>>>>> - Patch 1/3 moves (and renames) the BIOS_CFG_IOPORT (0x510)
>>>>>>>> define from pc.c to pc.h, so that it could be used from
>>>>>>>> acpi-build.c in patch 2/3.
>>>>>>>>
>>>>>>>> - Patch 2/3 adds a fw_cfg node to the pc SSDT.
>>>>>>>>
>>>>>>>> - Patch 3/3 adds a fw_cfg node to the arm DSDT.
>>>>>>>>
>>>>>>>> I made up some names - "FWCF" for the node name, and "FWCF0001"
>>>>>>>> for _HID; no idea whether that's appropriate, or how else I should
>>>>>>>> figure out what to use instead...
>>>>>>>>
>>>>>>>> Also, using scope "\\_SB", based on where fw_cfg shows up in the
>>>>>>>> output of "info qtree". Again, if that's wrong, please point me in
>>>>>>>> the right direction.
>>>>>>>>
>>>>>>>> Re. 3/3 (also mentioned after the commit blurb in the patch itself),
>>>>>>>> I noticed none of the other DSDT entries contain a _STA field,
>>>>>>>> wondering
>>>>>>>> why it would (not) make sense to include that, same as on the PC.
Gabriel L. Somlo (5):
fw_cfg: expose control register size in fw_cfg.h
pc: fw_cfg: move ioport base constant to pc.h
acpi: pc: add fw_cfg device node to dsdt
acpi: arm: add fw_cfg device node to dsdt
fw_cfg: document ACPI device node information
docs/specs/fw_cfg.txt | 9 +++++++++
hw/arm/virt-acpi-build.c | 15 +++++++++++++++
hw/i386/acpi-build.c | 29 +++++++++++++++++++++++++++++
hw/i386/pc.c | 5 ++---
hw/nvram/fw_cfg.c | 4 +++-
include/hw/i386/pc.h | 2 ++
include/hw/nvram/fw_cfg.h | 3 +++
7 files changed, 63 insertions(+), 4 deletions(-)
--
2.4.3
- [Qemu-arm] [PATCH v9 0/5] add ACPI node for fw_cfg on pc and arm,
Gabriel L. Somlo <=
- [Qemu-arm] [PATCH v9 4/5] acpi: arm: add fw_cfg device node to dsdt, Gabriel L. Somlo, 2016/02/19
- [Qemu-arm] [PATCH v9 2/5] pc: fw_cfg: move ioport base constant to pc.h, Gabriel L. Somlo, 2016/02/19
- [Qemu-arm] [PATCH v9 5/5] fw_cfg: document ACPI device node information, Gabriel L. Somlo, 2016/02/19
- [Qemu-arm] [PATCH v9 1/5] fw_cfg: expose control register size in fw_cfg.h, Gabriel L. Somlo, 2016/02/19
- [Qemu-arm] [PATCH v9 3/5] acpi: pc: add fw_cfg device node to dsdt, Gabriel L. Somlo, 2016/02/19