[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH 1/8] target-arm: Properly support EL2 and EL3 in a
From: |
Edgar E. Iglesias |
Subject: |
Re: [Qemu-arm] [PATCH 1/8] target-arm: Properly support EL2 and EL3 in arm_el_is_aa64() |
Date: |
Fri, 15 Jan 2016 16:37:37 +0100 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Fri, Jan 15, 2016 at 02:50:24PM +0000, Peter Maydell wrote:
> On 15 January 2016 at 14:38, Edgar E. Iglesias <address@hidden> wrote:
> > On Thu, Jan 14, 2016 at 06:34:04PM +0000, Peter Maydell wrote:
> >> Support EL2 and EL3 in arm_el_is_aa64() by implementing the
> >> logic for checking the SCR_EL3 and HCR_EL2 register-width bits
> >> as appropriate to determine the register width of lower exception
> >> levels.
> >>
> >> Signed-off-by: Peter Maydell <address@hidden>
> >
> > Hi Peter,
> >
> > On the ZynqMP we've got the Cortex-A53 EL3 RW configurable at reset
> > time. At some later point we'll likely have to implement that
> > runtime option...
>
> That might be tricky, we fairly well bake in "AARCH64 feature means
> 64-bit highest EL" at the moment. The KVM code takes the approach
> of "if it's not going to reset in AArch64 then unset the feature bit".
>
> Anyway, we'll cross that bridge when we get to it.
>
> Do you have much locally extra that you needed for enabling
> EL3 in the Cortex-A53? I have an ARM Trusted Firmware + OP-TEE
> setup now that I'm going to use to work through the missing bits,
> but if you've already gone through that effort there's no need
> my duplicating work...
I don't have anything immediate for EL3 beyond enabling it and some
boot thing for a15/aarch32 to allow me to run my tests. I haven't
really looked at the boot in detail for aa32 so I haven't bothered
submitting it. This is it:
commit b30c7102624241a67ebb2d3df70e88a4148f68a4
Author: Edgar E. Iglesias <address@hidden>
Date: Sun Sep 13 09:52:01 2015 +0200
target-arm: Start EL3 capable ARMv7 cores in MON mode
Signed-off-by: Edgar E. Iglesias <address@hidden>
diff --git a/target-arm/cpu.c b/target-arm/cpu.c
index f6f5539..485965f 100644
--- a/target-arm/cpu.c
+++ b/target-arm/cpu.c
@@ -164,6 +164,9 @@ static void arm_cpu_reset(CPUState *s)
#else
/* SVC mode with interrupts disabled. */
env->uncached_cpsr = ARM_CPU_MODE_SVC;
+ if (arm_feature(env, ARM_FEATURE_EL3)) {
+ env->uncached_cpsr = ARM_CPU_MODE_MON;
+ }
env->daif = PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F;
/* On ARMv7-M the CPSR_I is the value of the PRIMASK register, and is
* clear at reset. Initial SP and PC are loaded from ROM.
Re: [Qemu-arm] [Qemu-devel] [PATCH 1/8] target-arm: Properly support EL2 and EL3 in arm_el_is_aa64(), Sergey Fedorov, 2016/01/29
[Qemu-arm] [PATCH 8/8] target-arm: ignore ELR_ELx[1] for exception return to 32-bit ARM mode, Peter Maydell, 2016/01/14
[Qemu-arm] [PATCH 6/8] target-arm: Handle exception return from AArch64 to non-EL0 AArch32, Peter Maydell, 2016/01/14