[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Partysip-dev] MSN Messenger & Authentication
From: |
Aymeric Moizard |
Subject: |
Re: [Partysip-dev] MSN Messenger & Authentication |
Date: |
Thu, 21 Nov 2002 18:23:23 +0100 (CET) |
I made it!
I finally found the only mistake(??) is that msn requires to use a
specific "realm". I used the same ip address as partysip
is running on and it worked.
serverrealm = "192.168.1.66"
Does anybody knows how to configure the realm on windows messenger.
Also, it works both with 401 and 407...
Aymeric
On Thu, 21 Nov 2002, Stevens, Del wrote:
> I am looking for confirmation that MSN Messenger (4.6.xxx or better) has
> Digest Authentication and that some SIP UA has successfully gotten this to
> work.
>
> Here is the scenario:
>
> I configure MSN Messenger (4.6.082) to use Communication Service that points
> to my UA using UDP. I try to sign-in to Messenger which causes a REGISTER to
> be sent to my UA. I challenge the REGISTER with a 401 response that has a
> WWW-Authenticate header. On receipt of the 401, Messenger pops up a window
> asking for username and password. I fill this information in, click ok, and
> another REGISTER is sent to my UA but WITHOUT the Authorization header.
>
> I see on sipcenter that Messenger does not support Authentication, yet there
> are other emails floating around that seem to indicate it does work.
>
> Anyone with information one way or the other please let the world (and me)
> know what you have found out. If you did get it to work please let me know
> how.
>
> Thanks,
>
> Del Stevens
> mailto:address@hidden
>
>
>
> _______________________________________________
> Partysip-dev mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/partysip-dev
>