[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] A way to use the BEC?
From: |
Toader Adrian |
Subject: |
[Paparazzi-devel] A way to use the BEC? |
Date: |
Mon, 23 May 2011 03:16:51 -0700 (PDT) |
Hello,
Thank for answer. I want to use a BEC. I followed the link
(http://www.castlecreations.com/products/ccbec.html#) and now I would to know
if the way I am thinking to use the BEC is correct. I want to supply the BEC
and ESC with 5V from a CON_SERVO_2, and output voltage form the BEC to supply
all servos (aileron, elevator and rudder). ESC will control the brushless
motor.
The control signal for servos will be the connection from CON_SERVO_2 pins
(S4,S5,S6) to signal input to the servos.
The control signal for the motor will be the connection for I2S (12C1/CAN) pin
to ESC input .
Please tell me if this solution is feasible.
Thank you in already,
My regards,
Adrian
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Paparazzi-devel] A way to use the BEC?,
Toader Adrian <=