paparazzi-builds
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[paparazzi-builds] [paparazzi] Build failed : master #1289


From: Semaphore
Subject: [paparazzi-builds] [paparazzi] Build failed : master #1289
Date: Fri, 11 Nov 2016 23:02:50 +0000

Build 1289 Failed For project paparazzi on branch master
Last commit for this build
Michal Podhradsky 10 Nov 20:18
8cfa5f1 — PX4FLOW integration (#1907)
Build Results
01:02:29
Thread #1
ls -lah $SEMAPHORE_CACHE_DIR 00:00
df -h 00:00
docker pull flixr/pprz-dev 01:22
df -h 00:00
sudo rm -rf /home/runner/{.phpbrew,.phpunit,.kerl,.kiex,.lein,.nvm,.npm,.rbenv} 00:10
df -h 00:00
git --version 00:00
git status --ignored 00:00
git submodule deinit --force . 00:00
rm -rf .git/modules 00:00
git submodule update --init --force --recursive 00:36
if [ "$SEMAPHORE_TRIGGER_SOURCE" = "scheduler" ]; then docker/run.sh -it flixr/pprz-dev make test_all_confs ; else docker/run.sh -it flixr/pprz-dev make test ; fi 01:00:00
( Showing only the last 30 out of 81 lines. For a complete log visit the build page )

           ^
/home/pprz/paparazzi/var/aircrafts/Racer_PEX_Octo/ap/generated/airframe.h:227:3: note: in expansion of macro 'Set_BL_7_Servo'
   Set_BL_7_Servo(servo_value); \
   ^
firmwares/rotorcraft/main.c:271:3: note: in expansion of macro 'SetActuatorsFromCommands'
   SetActuatorsFromCommands(commands, autopilot_mode);
   ^
/home/pprz/paparazzi/sw/airborne/arch/stm32/subsystems/actuators/actuators_pwm_arch.h:43:54: warning: array subscript is above array bounds [-Warray-bounds]
 #define ActuatorPwmSet(_i, _v) { actuators_pwm_values[_i] = _v; }
                                                      ^
/home/pprz/paparazzi/var/aircrafts/Racer_PEX_Octo/ap/generated/airframe.h:138:3: note: in expansion of macro 'ActuatorPwmSet'
   ActuatorPwmSet(SERVO_FL_8, actuators[SERVO_FL_8_IDX]); \
   ^
/home/pprz/paparazzi/var/aircrafts/Racer_PEX_Octo/ap/generated/airframe.h:233:3: note: in expansion of macro 'Set_FL_8_Servo'
   Set_FL_8_Servo(servo_value); \
   ^
firmwares/rotorcraft/main.c:271:3: note: in expansion of macro 'SetActuatorsFromCommands'
   SetActuatorsFromCommands(commands, autopilot_mode);
   ^


# compiling AIRCRAFT: [Racer_PEX_Octo] TARGET: [nps]

tests/aircrafts/01_compile_all_aircrafts.t .. 5/61 # compiling AIRCRAFT: [Racer_PEX_Quad] TARGET: [ap]

tests/aircrafts/01_compile_all_aircrafts.t .. 6/61 # compiling AIRCRAFT: [Racer_PEX_Quad] TARGET: [nps]

tests/aircrafts/01_compile_all_aircrafts.t .. 7/61 # compiling AIRCRAFT: [Teensy_Fly_Hexa] TARGET: [ap]

tests/aircrafts/01_compile_all_aircrafts.t .. 8/61 # compiling AIRCRAFT: [Teensy_Fly_Hexa] TARGET: [nps]

tests/aircrafts/01_compile_all_aircrafts.t .. 9/61 # compiling AIRCRAFT: [Teensy_Fly_Quad] TARGET: [ap]

tests/aircrafts/01_compile_all_aircrafts.t .. 10/61 # compiling AIRCRAFT: [Teensy_Fly_Quad] TARGET: [nps]

tests/aircrafts/01_compile_all_aircrafts.t .. 11/61 # compiling AIRCRAFT: [Teensy_Fly_Quad_Elle0] TARGET: [ap]
execution expired
      
df -h 00:00

Manage your email notification settings.

Is this email not displaying correctly? Report the issue.

Sent by Semaphore


reply via email to

[Prev in Thread] Current Thread [Next in Thread]