openexr-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Openexr-devel] Pain to install pyilmabase


From: Forum (io)
Subject: Re: [Openexr-devel] Pain to install pyilmabase
Date: Thu, 7 Dec 2017 11:18:53 +0100
User-agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.12; rv:52.0) Gecko/20100101 Thunderbird/52.5.0

Dear Peter and all community member

Thank a lot for your reply.

Today, I have to spend time on my issues that I still can not solved. To be honnestly, I can not remember, why I could not install pyilmbase2-2- on the same folder of ilam...

However, your last e-mail has some important information that I need to solve first.

To resume, I download ilam2.2.0 into a "downlaod" folder and I untar it, I cd into pyilmbase-2-2-0 in order to compile. First I simply run that command

$ ./compile --prefix=/opt/pyilmbase2-2-0

I also "accidently" run this command

$ ./compile --prefix=/opt/ilmbase2-2-0

Both display this message

checking for boost::python... no
*** Could not run the boost::python test program, checking why...
*** The test program could not be compiled.  Is boost::python installed?
*** Check that the cflags (below) includes the boost::python include directory
***
*** Flags used by the test:
***     cflags: -g -O2  -I/usr/include/python2.7 -g -O2  -I/usr/include/python2.7
***     ldflags:  -L/opt/ilmbase-2-2-0/lib    -L/usr/lib64  -L/opt/ilmbase-2-2-0/lib    -L/usr/lib64
***
*** You can also run configure with --disable-boostpythontest to skip this test.
configure: error: Could not compile boost::python test program.

You mentioned to check if boost has been installed. Yes, I did it without issues. I installed boost 1.65.1 into /opt/boost_1.65.1
You also mentionned to try this following command, which indicated where is boost installation

$ ./configure --prefix=/opt/pyilmbase-2-2-0 --with-boost-include-dir=/opt/boost_1.65.1/include --with-boost-lib-dir=/opt/boost_1.65.1/lib

which look now really better, as I do not have the error message, starting with

checking for boost::python... no
*** Could not run the boost::python test program, checking why...
*** The test program could not be compiled.  Is boost::python installed?

As I can not find tutorial or example of pyilmbase installation, I run the following command from pyilmbase2-2-0 untar-ed folder, just after the ./compile command

# make

which shown me errors :o(

Before shwoing the error, note that into the /etc/bashrc file, I save the following line

export PATH=/opt/lua53/bin:$PATH

#export LD_LIBRARY_PATH=/opt/lua53/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH=/opt/lua53/lib:/opt/ilmbase-2-2-0/lib

export LUA_INCLUDE_DIR=/opt/lua53/include
export LUA_LIBRARIES=/opt/lua53/lib

export PKG_CONFIG_PATH=/opt/ilmbase-2-2-0/lib/pkgconfig


Nothing is about boost. Is it important?

Here is the error message generated by make from pyilmbase-2-2-0 folder:


address@hidden pyilmbase-2.2.0]# make
Making all in config
make[1]: Entering directory `/root/install-package/OpenEXR/pyilmbase-2.2.0/config'
make  all-am
make[2]: Entering directory `/root/install-package/OpenEXR/pyilmbase-2.2.0/config'
make[2]: Leaving directory `/root/install-package/OpenEXR/pyilmbase-2.2.0/config'
make[1]: Leaving directory `/root/install-package/OpenEXR/pyilmbase-2.2.0/config'
Making all in PyIex
make[1]: Entering directory `/root/install-package/OpenEXR/pyilmbase-2.2.0/PyIex'
/bin/sh ../libtool --tag=CXX   --mode=compile g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/opt/ilmbase-2-2-0/include/OpenEXR -I.. -I../config   -pipe -g -O2 -I/opt/boost_1.65.1/include -I/usr/include/python2.7 -MT PyIex.lo -MD -MP -MF .deps/PyIex.Tpo -c -o PyIex.lo PyIex.cpp
libtool: compile:  g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/opt/ilmbase-2-2-0/include/OpenEXR -I.. -I../config -pipe -g -O2 -I/opt/boost_1.65.1/include -I/usr/include/python2.7 -MT PyIex.lo -MD -MP -MF .deps/PyIex.Tpo -c PyIex.cpp  -fPIC -DPIC -o .libs/PyIex.o
In file included from /usr/include/python2.7/pyconfig.h:6:0,
                 from /usr/include/python2.7/Python.h:8,
                 from ./PyIex.h:45,
                 from PyIex.cpp:42:
/usr/include/python2.7/pyconfig-64.h:1188:0: warning: "_POSIX_C_SOURCE" redefined [enabled by default]
 #define _POSIX_C_SOURCE 200112L
 ^
In file included from /usr/include/c++/4.8.2/x86_64-redhat-linux/bits/os_defines.h:39:0,
                 from /usr/include/c++/4.8.2/x86_64-redhat-linux/bits/c++config.h:2097,
                 from /usr/include/c++/4.8.2/iosfwd:38,
                 from /usr/include/c++/4.8.2/ios:38,
                 from /usr/include/c++/4.8.2/istream:38,
                 from /usr/include/c++/4.8.2/sstream:38,
                 from ./PyIex.h:44,
                 from PyIex.cpp:42:
/usr/include/features.h:168:0: note: this is the location of the previous definition
 # define _POSIX_C_SOURCE 200809L
 ^
In file included from /usr/include/python2.7/pyconfig.h:6:0,
                 from /usr/include/python2.7/Python.h:8,
                 from ./PyIex.h:45,
                 from PyIex.cpp:42:
/usr/include/python2.7/pyconfig-64.h:1210:0: warning: "_XOPEN_SOURCE" redefined [enabled by default]
 #define _XOPEN_SOURCE 600
 ^
In file included from /usr/include/c++/4.8.2/x86_64-redhat-linux/bits/os_defines.h:39:0,
                 from /usr/include/c++/4.8.2/x86_64-redhat-linux/bits/c++config.h:2097,
                 from /usr/include/c++/4.8.2/iosfwd:38,
                 from /usr/include/c++/4.8.2/ios:38,
                 from /usr/include/c++/4.8.2/istream:38,
                 from /usr/include/c++/4.8.2/sstream:38,
                 from ./PyIex.h:44,
                 from PyIex.cpp:42:
/usr/include/features.h:170:0: note: this is the location of the previous definition
 # define _XOPEN_SOURCE 700
 ^
mv -f .deps/PyIex.Tpo .deps/PyIex.Plo
/bin/sh ../libtool --tag=CXX   --mode=link g++ -pipe -g -O2 -I/opt/boost_1.65.1/include -I/usr/include/python2.7 -version-info 2:2:0 -no-undefined -L/opt/ilmbase-2-2-0/lib   -L/opt/boost_1.65.1/lib -L/usr/lib64 -o libPyIex.la -rpath /opt/pyilmbase-2-2-0/lib PyIex.lo -lz -pthread -L/opt/ilmbase-2-2-0/lib -lImath -lHalf -lIex -lIexMath -lIlmThread   -lboost_python -lpython2.7
libtool: link: g++ -shared -nostdlib /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crti.o /usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtbeginS.o  .libs/PyIex.o   -Wl,-rpath -Wl,/opt/ilmbase-2-2-0/lib -Wl,-rpath -Wl,/opt/ilmbase-2-2-0/lib -L/opt/ilmbase-2-2-0/lib -L/opt/boost_1.65.1/lib -L/usr/lib64 -lz /opt/ilmbase-2-2-0/lib/libImath.so /opt/ilmbase-2-2-0/lib/libHalf.so /opt/ilmbase-2-2-0/lib/libIexMath.so /opt/ilmbase-2-2-0/lib/libIlmThread.so /opt/ilmbase-2-2-0/lib/libIex.so -lboost_python -lpython2.7 -L/usr/lib/gcc/x86_64-redhat-linux/4.8.5 -L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtendS.o /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crtn.o  -pthread   -pthread -Wl,-soname -Wl,libPyIex.so.2 -o .libs/libPyIex.so.2.0.2
libtool: link: (cd ".libs" && rm -f "libPyIex.so.2" && ln -s "libPyIex.so.2.0.2" "libPyIex.so.2")
libtool: link: (cd ".libs" && rm -f "libPyIex.so" && ln -s "libPyIex.so.2.0.2" "libPyIex.so")
libtool: link: ( cd ".libs" && rm -f "libPyIex.la" && ln -s "../libPyIex.la" "libPyIex.la" )
/bin/sh ../libtool --tag=CXX   --mode=compile g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/opt/ilmbase-2-2-0/include/OpenEXR -I.. -I../config   -pipe -g -O2 -I/opt/boost_1.65.1/include -I/usr/include/python2.7 -MT iexmodule.lo -MD -MP -MF .deps/iexmodule.Tpo -c -o iexmodule.lo iexmodule.cpp
libtool: compile:  g++ -DHAVE_CONFIG_H -I. -I../config -pthread -I/opt/ilmbase-2-2-0/include/OpenEXR -I.. -I../config -pipe -g -O2 -I/opt/boost_1.65.1/include -I/usr/include/python2.7 -MT iexmodule.lo -MD -MP -MF .deps/iexmodule.Tpo -c iexmodule.cpp  -fPIC -DPIC -o .libs/iexmodule.o
mv -f .deps/iexmodule.Tpo .deps/iexmodule.Plo
/bin/sh ../libtool --tag=CXX   --mode=link g++ -pipe -g -O2 -I/opt/boost_1.65.1/include -I/usr/include/python2.7 -avoid-version -module -L/opt/ilmbase-2-2-0/lib   -L/opt/boost_1.65.1/lib -L/usr/lib64 -o iexmodule.la -rpath /opt/pyilmbase-2-2-0/lib64/python2.7/site-packages iexmodule.lo libPyIex.la -lboost_python -lpython2.7
libtool: link: g++ -shared -nostdlib /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crti.o /usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtbeginS.o  .libs/iexmodule.o   -Wl,-rpath -Wl,/root/install-package/OpenEXR/pyilmbase-2.2.0/PyIex/.libs -Wl,-rpath -Wl,/opt/ilmbase-2-2-0/lib -Wl,-rpath -Wl,/opt/pyilmbase-2-2-0/lib -Wl,-rpath -Wl,/opt/ilmbase-2-2-0/lib -L/opt/ilmbase-2-2-0/lib -L/opt/boost_1.65.1/lib -L/usr/lib64 ./.libs/libPyIex.so -lz /opt/ilmbase-2-2-0/lib/libImath.so /opt/ilmbase-2-2-0/lib/libHalf.so /opt/ilmbase-2-2-0/lib/libIexMath.so /opt/ilmbase-2-2-0/lib/libIlmThread.so /opt/ilmbase-2-2-0/lib/libIex.so -lboost_python -lpython2.7 -L/usr/lib/gcc/x86_64-redhat-linux/4.8.5 -L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtendS.o /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crtn.o    -pthread -Wl,-soname -Wl,iexmodule.so -o .libs/iexmodule.so

/usr/bin/ld: /opt/boost_1.65.1/lib/libboost_python.a(dict.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/opt/boost_1.65.1/lib/libboost_python.a: error adding symbols: Bad value
collect2: error: ld returned 1 exit status

make[1]: *** [iexmodule.la] Error 1
make[1]: Leaving directory `/root/install-package/OpenEXR/pyilmbase-2.2.0/PyIex'

make: *** [all-recursive] Error 1
address@hidden pyilmbase-2.2.0]#


I wonder, if there is an official procedure to install pyilmbase-2.2.0

I also observed a file name install-sh. How can that file can be usefull for the installation?

You also spoke about installing into the same folder of ilmbase-2-2-0. What would you change regarding my about steps? To be honst with you, last week I tried but I do not rember why, I finally soecified a folder dedicated for pyilmbase2-2-0 in /opt/


Many many thank for your help and help from openexr community.

Cheers
Pierrot


On 12/1/17 1:21 AM, Peter Hillman wrote:
./configure --prefix=/opt/ilmbase-2-2-0 --with-boost-include-dir=/opt/boost/include --with-boost-lib-dir=/opt/boost/lib


reply via email to

[Prev in Thread] Current Thread [Next in Thread]