octave-maintainers
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Mingw Octave 3.4.2 - blank gnuplot printouts


From: Tatsuro MATSUOKA
Subject: Re: Mingw Octave 3.4.2 - blank gnuplot printouts
Date: Mon, 12 Sep 2011 12:44:41 +0900 (JST)

Hello

I have deleted share/gnuplot by mistake in the previous packaging.
(In the folder, the prorogue files for postscript terminal are included.) 

I have corrected the octave-3.4.2.zip on 
http://www.tatsuromatsuoka.com/octave/Eng/Win/

You can correct errors if you copy share/gnuplot from octave-3.4.2.zip and 
paste it to the corresponding directory.

I hope the the correction make eliminate errors.

Regards

Tatsuro

--- On Mon, 2011/9/12, Tatsuro MATSUOKA wrote:

> Hello
> 
> Using octave built from development source, all prints went without failure.
> Hmmm
> 
> Anyway I will look into in detail.
> 
> Regards
> 
> Tatsuro
> 
> --- On Sat, 2011/9/10, Tatsuro MATSUOKA  wrote:
> 
> > Hello
> > 
> > With your package and my current packages
> > 
> > graphics_toolkit gnuplot
> > peaks
> > print -demf peaks.emf
> > print -dpng peaks.png
> > print -deps peaks.eps
> > print -dps peaks.ps
> > print -dsvg peaks.svg
> > print -djpg peaks.jpg
> > 
> > Success, emf and svg.
> > Failure png, eps, ps and jpg
> > 
> > I have not tried the other formats.
> > 
> > Hmm.  I have not make enough explanation why current build fails in print 
> > command in some formats..
> > 
> > I have further look into this phenomena.
> > 
> > Regards
> > 
> > Tatsuro.
> > 
> > --- On Fri, 2011/9/9, Nit Nit wrote:
> > 
> > > 
> > > Hello Tatsuro and other octave maintainers,
> > > 
> > > With your mingw build of octave-3.4.2 + gnuplot when using 
> > > graphics_toolkit('gnuplot') - printing a figure (with 'print') always 
> > > produce a blank page.
> > > This happens with my installation tree (as can be downloaded with mingw 
> > > octave 3.4.2 links in your wiki 
> > > http://wiki.octave.org/wiki.pl?OctaveForWindows).
> > > 
> > > For graphics_toolkit('fltk') printing is ok !
> > > 
> > > With previous mingw build of octave 3.2.4 with 
> > > graphics_toolkit('gnuplot'), printed figures are ok.
> > > 
> > > Are you also facing this problem ? Do you have any idea what may cause it 
> > > ?
> > > 
> > > Regards,
> > > 
> > > Nitzan
> >
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]