|
From: | Vikram Kone |
Subject: | Re: how does monit every cycle statement works? |
Date: | Wed, 10 Aug 2016 23:51:59 -0700 |
Do you mean this one?if status !=0 for 2 times within 2 cycles then alert
On Wed, Aug 10, 2016 at 11:06 PM, Martin Pala <address@hidden> wrote:The second configuration is correct.The combination of "every" with "X cycles" is confusing, we'll modify the syntax: https://bitbucket.org/tildeslash/monit/issues/174/th e-for-x-cycles-is-confusing-if -the-test Best regards,MartinOn 11 Aug 2016, at 04:48, Vikram Kone <address@hidden> wrote:--I have a monit check program as follows
check program test_pgm with path "/bin/bash /var/run/test.sh" every 2 cycles if status !=0 for 2 cycles then alert
Let's say my monit daemon is set to run every 60 seconds which means each cycle is 1 minute. I want to run my program every 2mins and alert if it fails twice in a row
Is what I have above correct? or should I say
if status !=0 for 4 cycles then alert
or should it be
if status !=0 for 2 times within 2 cycles then alert
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
[Prev in Thread] | Current Thread | [Next in Thread] |