[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [lwip-users] Connect two machines running LWIP applications via WLAN
From: |
shruthi |
Subject: |
Re: [lwip-users] Connect two machines running LWIP applications via WLAN |
Date: |
Tue, 4 Apr 2017 03:46:01 -0700 (MST) |
Hi Dirk,
Thanks for replying. I followed the steps given in the link you sent, and
used them for tap0 interface instead of eth0. I was able to ping from LWIP
stack on machine-1 to the wlan0 interface of machine-2, and vice versa (I
had to manually add some routes in the routing tables of the two machines to
achieve this). However, I couldn't set up a connection between the two LWIP
stacks - they still can't ping each other.
I have attached a picture of the setup which shows the IP addresses that I
have assigned and the connections that are working.
<http://lwip.100.n7.nabble.com/file/n29233/setup.png>
I have also attached screenshots showing the routing tables of machines 1
and 2.
<http://lwip.100.n7.nabble.com/file/n29233/machine1.png>
<http://lwip.100.n7.nabble.com/file/n29233/machine2.png>
I am not an expert in networking or LWIP so I might have mis-configured
something. Could you please take a look and tell me if I'm doing it wrong?
- Shruthi
--
View this message in context:
http://lwip.100.n7.nabble.com/Connect-two-machines-running-LWIP-applications-via-WLAN-tp29211p29233.html
Sent from the lwip-users mailing list archive at Nabble.com.