/**
******************************************************************************
* @file netconf.c
* @author MCD Application Team
* @version V1.1.0
* @date 31-July-2013
* @brief Network connection configuration
******************************************************************************
* @attention
*
*
© COPYRIGHT 2013 STMicroelectronics
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "lwip/mem.h"
#include "lwip/memp.h"
#include "lwip/tcp.h"
#include "lwip/tcp_impl.h"
#include "lwip/udp.h"
#include "netif/etharp.h"
#include "lwip/dhcp.h"
#include "ethernetif.h"
#include "main.h"
#include "netconf.h"
#include
/* Private typedef -----------------------------------------------------------*/
#define MAX_DHCP_TRIES 4
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
struct netif gnetif;
uint32_t TCPTimer = 0;
uint32_t ARPTimer = 0;
uint32_t IPaddress = 0;
#ifdef USE_DHCP
uint32_t DHCPfineTimer = 0;
uint32_t DHCPcoarseTimer = 0;
__IO uint8_t DHCP_state;
#endif
extern __IO uint32_t EthStatus;
/* Private functions ---------------------------------------------------------*/
void LwIP_DHCP_Process_Handle(void);
/**
* @brief Initializes the lwIP stack
* @param None
* @retval None
*/
void LwIP_Init(void)
{
struct ip_addr ipaddr;
struct ip_addr netmask;
struct ip_addr gw;
#ifndef USE_DHCP
uint8_t iptab[4] = {0};
uint8_t iptxt[20];
#endif
/* Initializes the dynamic memory heap defined by MEM_SIZE.*/
mem_init();
/* Initializes the memory pools defined by MEMP_NUM_x.*/
memp_init();
#ifdef USE_DHCP
ipaddr.addr = 0;
netmask.addr = 0;
gw.addr = 0;
#else
IP4_ADDR(&ipaddr, IP_ADDR0, IP_ADDR1, IP_ADDR2, IP_ADDR3);
IP4_ADDR(&netmask, NETMASK_ADDR0, NETMASK_ADDR1 , NETMASK_ADDR2, NETMASK_ADDR3);
IP4_ADDR(&gw, GW_ADDR0, GW_ADDR1, GW_ADDR2, GW_ADDR3);
#endif
/* - netif_add(struct netif *netif, struct ip_addr *ipaddr,
struct ip_addr *netmask, struct ip_addr *gw,
void *state, err_t (* init)(struct netif *netif),
err_t (* input)(struct pbuf *p, struct netif *netif))
Adds your network interface to the netif_list. Allocate a struct
netif and pass a pointer to this structure as the first argument.
Give pointers to cleared ip_addr structures when using DHCP,
or fill them with sane numbers otherwise. The state pointer may be NULL.
The init function pointer must point to a initialization function for
your ethernet netif interface. The following code illustrates it's use.*/
netif_add(&gnetif, &ipaddr, &netmask, &gw, NULL, ðernetif_init, ðernet_input);
/* Registers the default network interface.*/
netif_set_default(&gnetif);
if (EthStatus == (ETH_INIT_FLAG | ETH_LINK_FLAG))
{
/* Set Ethernet link flag */
gnetif.flags |= NETIF_FLAG_LINK_UP;
/* When the netif is fully configured this function must be called */
netif_set_up(&gnetif);
#ifdef USE_DHCP
DHCP_state = DHCP_START;
#else
#ifdef USE_LCD
iptab[0] = IP_ADDR3;
iptab[1] = IP_ADDR2;
iptab[2] = IP_ADDR1;
iptab[3] = IP_ADDR0;
sprintf((char*)iptxt, " %d.%d.%d.%d", iptab[3], iptab[2], iptab[1], iptab[0]);
LCD_DisplayStringLine(Line8, (uint8_t*)" Static IP address ");
LCD_DisplayStringLine(Line9, iptxt);
#endif
#endif /* USE_DHCP */
}
else
{
/* When the netif link is down this function must be called */
netif_set_down(&gnetif);
#ifdef USE_DHCP
DHCP_state = DHCP_LINK_DOWN;
#endif /* USE_DHCP */
#ifdef USE_LCD
/* Set the LCD Text Color */
LCD_SetTextColor(Red);
/* Display message on the LCD */
LCD_DisplayStringLine(Line5, (uint8_t*)" Network Cable is ");
LCD_DisplayStringLine(Line6, (uint8_t*)" not connected ");
/* Set the LCD Text Color */
LCD_SetTextColor(White);
#endif
}
/* Set the link callback function, this function is called on change of link status*/
netif_set_link_callback(&gnetif, ETH_link_callback);
}
/**
* @brief Called when a frame is received
* @param None
* @retval None
*/
void LwIP_Pkt_Handle(void)
{
/* Read a received packet from the Ethernet buffers and send it to the lwIP for handling */
ethernetif_input(&gnetif);
}
/**
* @brief LwIP periodic tasks
* @param localtime the current LocalTime value
* @retval None
*/
void LwIP_Periodic_Handle(__IO uint32_t localtime)
{
#if LWIP_TCP
/* TCP periodic process every 250 ms */
if (localtime - TCPTimer >= TCP_TMR_INTERVAL)
{
TCPTimer = localtime;
tcp_tmr();
}
#endif
/* ARP periodic process every 5s */
if ((localtime - ARPTimer) >= ARP_TMR_INTERVAL)
{
ARPTimer = localtime;
etharp_tmr();
}
#ifdef USE_DHCP
/* Fine DHCP periodic process every 500ms */
if (localtime - DHCPfineTimer >= DHCP_FINE_TIMER_MSECS)
{
DHCPfineTimer = localtime;
dhcp_fine_tmr();
if ((DHCP_state != DHCP_ADDRESS_ASSIGNED) &&
(DHCP_state != DHCP_TIMEOUT) &&
(DHCP_state != DHCP_LINK_DOWN))
{
#if defined (USE_STM324xG_EVAL) || defined (USE_STM324x7I_EVAL)
/* toggle LED1 to indicate DHCP on-going process */
STM_EVAL_LEDToggle(LED1);
#endif
/* process DHCP state machine */
LwIP_DHCP_Process_Handle();
}
}
/* DHCP Coarse periodic process every 60s */
if (localtime - DHCPcoarseTimer >= DHCP_COARSE_TIMER_MSECS)
{
DHCPcoarseTimer = localtime;
dhcp_coarse_tmr();
}
#endif
}
#ifdef USE_DHCP
/**
* @brief LwIP_DHCP_Process_Handle
* @param None
* @retval None
*/
void LwIP_DHCP_Process_Handle()
{
struct ip_addr ipaddr;
struct ip_addr netmask;
struct ip_addr gw;
uint8_t iptab[4] = {0};
uint8_t iptxt[20];
switch (DHCP_state)
{
case DHCP_START:
{
DHCP_state = DHCP_WAIT_ADDRESS;
dhcp_start(&gnetif);
/* IP address should be set to 0
every time we want to assign a new DHCP address */
IPaddress = 0;
#ifdef USE_LCD
LCD_DisplayStringLine(Line4, (uint8_t*)" Looking for ");
LCD_DisplayStringLine(Line5, (uint8_t*)" DHCP server ");
LCD_DisplayStringLine(Line6, (uint8_t*)" please wait... ");
#endif
}
break;
case DHCP_WAIT_ADDRESS:
{
/* Read the new IP address */
IPaddress = gnetif.ip_addr.addr;
if (IPaddress!=0)
{
DHCP_state = DHCP_ADDRESS_ASSIGNED;
/* Stop DHCP */
dhcp_stop(&gnetif);
iptab[0] = (uint8_t)(IPaddress >> 24);
iptab[1] = (uint8_t)(IPaddress >> 16);
iptab[2] = (uint8_t)(IPaddress >> 8);
iptab[3] = (uint8_t)(IPaddress);
#ifdef USE_LCD
sprintf((char*)iptxt, " %d.%d.%d.%d", iptab[3], iptab[2], iptab[1], iptab[0]);
LCD_ClearLine(Line4);
LCD_ClearLine(Line5);
LCD_ClearLine(Line6);
/* Display the IP address */
LCD_DisplayStringLine(Line7, (uint8_t*)"IP address assigned ");
LCD_DisplayStringLine(Line8, (uint8_t*)" by a DHCP server ");
LCD_DisplayStringLine(Line9, iptxt);
#endif
#if defined (USE_STM324xG_EVAL) || defined (USE_STM324x7I_EVAL)
STM_EVAL_LEDOn(LED1);
#endif
}
else
{
/* DHCP timeout */
if (gnetif.dhcp->tries > MAX_DHCP_TRIES)
{
DHCP_state = DHCP_TIMEOUT;
/* Stop DHCP */
dhcp_stop(&gnetif);
/* Static address used */
IP4_ADDR(&ipaddr, IP_ADDR0 ,IP_ADDR1 , IP_ADDR2 , IP_ADDR3 );
IP4_ADDR(&netmask, NETMASK_ADDR0, NETMASK_ADDR1, NETMASK_ADDR2, NETMASK_ADDR3);
IP4_ADDR(&gw, GW_ADDR0, GW_ADDR1, GW_ADDR2, GW_ADDR3);
netif_set_addr(&gnetif, &ipaddr , &netmask, &gw);
iptab[0] = IP_ADDR3;
iptab[1] = IP_ADDR2;
iptab[2] = IP_ADDR1;
iptab[3] = IP_ADDR0;
#ifdef USE_LCD
LCD_DisplayStringLine(Line7, (uint8_t*)" DHCP timeout ");
sprintf((char*)iptxt, " %d.%d.%d.%d", iptab[3], iptab[2], iptab[1], iptab[0]);
LCD_ClearLine(Line4);
LCD_ClearLine(Line5);
LCD_ClearLine(Line6);
LCD_DisplayStringLine(Line8, (uint8_t*)" Static IP address ");
LCD_DisplayStringLine(Line9, iptxt);
#endif
#if defined (USE_STM324xG_EVAL) || defined (USE_STM324x7I_EVAL)
STM_EVAL_LEDOn(LED1);
#endif
}
}
}
break;
default: break;
}
}
#endif
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/