/* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ #include "arch/cc.h" #define SYS_LIGHTWEIGHT_PROT 1 #define TCPIP_THREAD_PRIO 7 /* ---------- Memory options ---------- */ /* MEM_ALIGNMENT: should be set to the alignment of the CPU for which lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 byte alignment -> define MEM_ALIGNMENT to 2. */ #define MEM_ALIGNMENT 4 /* MEM_SIZE: the size of the heap memory. If the application will send a lot of data that needs to be copied, this should be set high. */ #define MEM_SIZE 40000 /* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application sends a lot of data out of ROM (or other static memory), this should be set high. */ #define MEMP_NUM_PBUF 64 /* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One per active UDP "connection". */ #define MEMP_NUM_UDP_PCB 4 /* MEMP_NUM_TCP_PCB: the number of simultaneously active TCP connections. */ #define MEMP_NUM_TCP_PCB 40 /* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. */ #define MEMP_NUM_TCP_PCB_LISTEN 16 /* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. */ #define MEMP_NUM_TCP_SEG 24 /* MEMP_NUM_SYS_TIMEOUT: the number of simultaneously active timeouts. */ #define MEMP_NUM_SYS_TIMEOUT 10 /* The following four are used only with the sequential API and can be set to 0 if the application only will use the raw API. */ /* MEMP_NUM_NETBUF: the number of struct netbufs. */ #define MEMP_NUM_NETBUF 16 /* MEMP_NUM_NETCONN: the number of struct netconns. */ #define MEMP_NUM_NETCONN 16 /* These two control is reclaimer functions should be compiled in. Should always be turned on (1). */ #define MEM_RECLAIM 1 #define MEMP_RECLAIM 1 /* ---------- Pbuf options ---------- */ /* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #define PBUF_POOL_SIZE 32 /* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ #define PBUF_POOL_BUFSIZE 1024 /* PBUF_LINK_HLEN: the number of bytes that should be allocated for a link level header. */ #define PBUF_LINK_HLEN 16 /* ---------- TCP options ---------- */ #define LWIP_TCP 1 #define TCP_TTL 255 /* Controls if TCP should queue segments that arrive out of order. Define to 0 if your device is low on memory. */ #define TCP_QUEUE_OOSEQ 1 /* TCP Maximum segment size. */ #define TCP_MSS 1500 /* TCP sender buffer space (bytes). */ #define TCP_SND_BUF (4 * TCP_MSS) /* TCP sender buffer space (pbufs). This must be at least = 2 * TCP_SND_BUF/TCP_MSS for things to work. */ #define TCP_SND_QUEUELEN (6 * TCP_SND_BUF)/TCP_MSS /* TCP receive window. */ #define TCP_WND 1500 /* Maximum number of retransmissions of data segments. */ #define TCP_MAXRTX 12 /* Maximum number of retransmissions of SYN segments. */ #define TCP_SYNMAXRTX 4 /* ---------- ARP options ---------- */ #define LWIP_ARP 1 #define ARP_TABLE_SIZE 10 #define ARP_QUEUEING 1 /* ---------- IP options ---------- */ /* Define IP_FORWARD to 1 if you wish to have the ability to forward IP packets across network interfaces. If you are going to run lwIP on a device with only one network interface, define this to 0. */ #define IP_FORWARD 1 /* If defined to 1, IP options are allowed (but not parsed). If defined to 0, all packets with IP options are dropped. */ #define IP_OPTIONS 1 /* ---------- ICMP options ---------- */ #define ICMP_TTL 255 /* ---------- DHCP options ---------- */ /* Define LWIP_DHCP to 1 if you want DHCP configuration of interfaces. */ #define LWIP_DHCP 0 /* 1 if you want to do an ARP check on the offered address (recommended). */ #define DHCP_DOES_ARP_CHECK 0 /* ---------- UDP options ---------- */ #define LWIP_UDP 0 #define UDP_TTL 255 /* ---------- Thread options ---------- */ #define TCPIP_THREAD_STACKSIZE 512 #define DEFAULT_THREAD_STACKSIZE 512 #define TCPIP_MBOX_SIZE 10 #define DEFAULT_TCP_RECVMBOX_SIZE 6 #define DEFAULT_ACCEPTMBOX_SIZE 6 /* ---------- RAW options ---------- */ #define LWIP_RAW 0 /* ---------- MUTEX options ----------- */ /* Define LWIP_COMPAT_MUTEX if the port has no mutexes and binary semaphores should be used instead */ //#define LWIP_COMPAT_MUTEX /* ---------- Statistics options ---------- */ #define STATS #ifdef STATS #define LINK_STATS 1 #define IP_STATS 1 #define ICMP_STATS 1 #define UDP_STATS 1 #define TCP_STATS 1 #define MEM_STATS 1 #define MEMP_STATS 1 #define PBUF_STATS 1 #define SYS_STATS 1 #endif /* STATS */ #define LWIP_PROVIDE_ERRNO 1 #define LWIP_DBG_TYPES_ON LWIP_DBG_ON #define ETHARP_DEBUG LWIP_DBG_OFF #define NETIF_DEBUG LWIP_DBG_OFF #define PBUF_DEBUG LWIP_DBG_OFF #define API_LIB_DEBUG LWIP_DBG_OFF #define API_MSG_DEBUG LWIP_DBG_OFF #define SOCKETS_DEBUG LWIP_DBG_OFF #define ICMP_DEBUG LWIP_DBG_OFF #define IGMP_DEBUG LWIP_DBG_OFF #define INET_DEBUG LWIP_DBG_OFF #define IP_DEBUG LWIP_DBG_OFF #define IP_REASS_DEBUG LWIP_DBG_OFF #define RAW_DEBUG LWIP_DBG_OFF #define MEM_DEBUG LWIP_DBG_OFF #define MEMP_DEBUG LWIP_DBG_OFF #define SYS_DEBUG LWIP_DBG_OFF #define TCP_DEBUG LWIP_DBG_OFF #define TCP_INPUT_DEBUG LWIP_DBG_OFF #define TCP_FR_DEBUG LWIP_DBG_OFF #define TCP_RTO_DEBUG LWIP_DBG_OFF #define TCP_CWND_DEBUG LWIP_DBG_OFF #define TCP_WND_DEBUG LWIP_DBG_OFF #define TCP_OUTPUT_DEBUG LWIP_DBG_OFF #define TCP_RST_DEBUG LWIP_DBG_OFF #define TCP_QLEN_DEBUG LWIP_DBG_OFF #define UDP_DEBUG LWIP_DBG_OFF #define TCPIP_DEBUG LWIP_DBG_OFF #define PPP_DEBUG LWIP_DBG_OFF #define SLIP_DEBUG LWIP_DBG_OFF #define DHCP_DEBUG LWIP_DBG_OFF #define AUTOIP_DEBUG LWIP_DBG_OFF #define SNMP_MSG_DEBUG LWIP_DBG_OFF #define SNMP_MIB_DEBUG LWIP_DBG_OFF #define DNS_DEBUG LWIP_DBG_OFF #endif /* __LWIPOPTS_H__ */