Hi
I downloaded
the contrib folder from cvs, so as to build a project using lwIP libraries in
linux.
But i was getting the following errors:
../../../../../lwip/src/core/mem.c: In function
`mem_free':
../../../../../lwip/src/core/mem.c:160: error:
`LWIP_DBG_OFF' undeclared (first use in this function)
../../../../../lwip/src/core/mem.c:160: error:
(Each undeclared identifier is reported only once
../../../../../lwip/src/core/mem.c:160: error: for
each function it appears in.)
../../../../../lwip/src/core/mem.c: In function
`mem_realloc':
../../../../../lwip/src/core/mem.c:218: error:
`LWIP_DBG_OFF' undeclared (first use in this function)
../../../../../lwip/src/core/mem.c: In function
`mem_malloc':
../../../../../lwip/src/core/mem.c:315: error:
`LWIP_DBG_OFF' undeclared (first use in this function)
make: *** [mem.o]
Error 1
Build Directory: contrib/ports/unix/proj/unixsim
make
version: 3.80
gcc version: tried with gcc v4.1.2 and gcc v3.4.6 both
failed.
Linux: Fedora Core release 5 (Bordeaux), Kernel
2.6.15-1.2054_FC5smp on an i686
Have i missed
anything?
Regards,
Rohit
Hi
>1. Is it possible to use lwip libraries for
this?
Yes
>2. Where should i look for target dependencies in lwip
libraries? Any documentation on this?
There is no real hardware dependencies, it seems that lot of
different targets use it
3.
Any standard procedure to be followed to build lwIP libraries? i couldn't see
any standard makefiles or configure scripts.
>It's true. Except for linux or MSVC, there
is no build tools. For you case (I will suppose you don't use sequential apis,
like netconn or socket), files you need to put in your makefile should
be:
#with all other
features
C_SOURCES = \
src/api/err.c \
src/core/dhcp.c \
src/core/inet.c \
src/core/mem.c \
src/core/memp.c \
src/core/netif.c \
src/core/pbuf.c \
src/core/raw.c \
src/core/stats.c \
src/core/udp.c \
src/core/ipv4/autoip.c \
src/core/ipv4/icmp.c \
src/core/ipv4/igmp.c \
src/core/ipv4/ip.c \
src/core/ipv4/ip_addr.c
\
src/core/ipv4/ip_frag.c
\
src/core/snmp/asn1_dec.c
\
src/core/snmp/asn1_enc.c
\
src/core/snmp/mib2.c \
src/core/snmp/mib_structs.c
\
src/core/snmp/msg_in.c \
src/core/snmp/msg_out.c
\
src/netif/etharp.c \
#with minimal
features
C_SOURCES =
\
src/api/err.c
\
src/core/inet.c
\
src/core/mem.c
\
src/core/memp.c
\
src/core/netif.c
\
src/core/pbuf.c
\
src/core/stats.c
\
src/core/udp.c
\
src/core/ipv4/icmp.c
\
src/core/ipv4/ip.c
\
src/core/ipv4/ip_addr.c
\
src/core/ipv4/ip_frag.c
\
src/netif/etharp.c
\
4. Is it possible to build lwIP
libraries for UDP support alone?
Yes. You have to create a lwipopts.h file
which contains options to enable/disable (see opt.h to know existing
options).
You can file
some informations on :
====================================
Frédéric
BERNON
HYMATOM SA
Chef de projet informatique
Microsoft
Certified Professional
Tél. : +33
(0)4-67-87-61-10
Fax. : +33
(0)4-67-70-85-44
Email : address@hiddenr
Web
Site : http://www.hymatom.fr
====================================
P Avant d'imprimer, penser à
l'environnement
-----Message
d'origine-----
De : address@hidden [mailto:address@hidden De la part
de Rohit Arul Raj
Envoyé : mardi 14 août 2007
09:21
À : address@hidden
Objet : [lwip-users]
Building lwIP libraries - general info
Hi all,
I am
a newbie to lwip. I have an embedded target board running which does not have
any OS support.
I need to implement UDP stack on this board.
1. Is
it possible to use lwip libraries for this?
2. Where should i look for
target dependencies in lwip libraries? Any documentation on this?
3. Any
standard procedure to be followed to build lwIP libraries? i couldn't see any
standard makefiles or configure scripts.
4. Is it possible to build lwIP
libraries for UDP support alone?
Any help will be very much
useful.
Regards,
Rohit
