[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lwip-users] Re: Re: Re: [lwip] Porting on rabbit
From: |
harish jayaraj |
Subject: |
[lwip-users] Re: Re: Re: [lwip] Porting on rabbit |
Date: |
Wed, 08 Jan 2003 23:29:33 -0000 |
Thanks a lot Sir!!!
I will download and read the same and will get back to you with
greater information.
Thanks a lot
Harish
On Sat, 20 Jul 2002 Leon Woestenberg wrote :
>Hello Harish,
>
>it seems you are talking about the lwIP included cs8900a drivers;
>there is
>another one here:
>
>http://www.esrac.ele.tue.nl/~leon/lwip/
>
>and it supports both polling as well as interrupt driven, as
>well
>as a combination. Yes, you need to account for the reset
>period yourself. (I.e. you might initialize other hardware in
>the
>meantime).
>
>Regards,
>
>Leon.
>
>
>----- Original Message -----
> From: "harish jayaraj" <address@hidden>
>To: <address@hidden>
>Sent: Friday, July 19, 2002 6:31 AM
>Subject: Re: Re: [lwip] Porting on rabbit
>
>
> > Hi leon,
> > Thanks a lot Leon!! I think i can acheive my goal with
>the
> > support of this mailing list. I 'am truel overwhelmed by the
> > response/support 'am getting from this list. Thanks again.
> > Let me explain what i have planned to do.
> > We have a RTOS which is developed by the comp.Sc. dept in
>our
> > school, and we need to port Lwip to this RTOS. And we will
>then
> > think of running it on the processor available in our lab.
> >
> > I have gone thro' the documents and i have some quires.
> > - Where is code for s/w timer in case of rtxc. As far as
>my
> > understanding goes, i think in general i have to install a
>timer
> > and then resume the timer. (Please correct me if 'am wrong)
> > - I went thro' the cs8900a specs in breif. Is LWip working
>on
> > interrupt mode or polling mode. Investigating the cs8900rx()
>i
> > understand it is in polling mode. 'am i right?
> > - cs8900 needs some settling time after reseting it, i
>havent
> > been able to find this logic in the existing code.
> > I have some more question, i will try to dig deep into the
>code
> > and will see it can find answer by myself.
> >
> > Thanks a lot List.
> > Regards,
> > Harish
> >
> > On Fri, 19 Jul 2002 Leon Woestenberg wrote :
> > > > I have planned to port lwip with cs8900a on to a
> > >Rabbit
> > > > processor. I 'am doing this as my college project.
> > > > So all u big and talented people can i get help?
> > > > Please do guide me as to how to go about it..
> > > >
> > >1) get sources and documentation
> > >2) read them, study them
> > >3) plan a bit, investigate what others have already
>achieved
> > >4) start with what you think would work best
> > >5) ask direct question if you get stuck at some point
> > >6-99) Good luck.
> > >
> > >
> > >Leon.
> > >
> > >[This message was sent through the lwip discussion list.]
> >
> > [This message was sent through the lwip discussion list.]
> >
>
>[This message was sent through the lwip discussion list.]
[This message was sent through the lwip discussion list.]
- [lwip-users] Re: Re: Re: [lwip] Porting on rabbit,
harish jayaraj <=