[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] Fwd: ltib installation problem

From: Peter Barada
Subject: Re: [Ltib] Fwd: ltib installation problem
Date: Tue, 06 Mar 2012 11:50:13 -0500
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20120216 Lightning/1.0b2 Thunderbird/3.1.19

On 03/06/2012 11:26 AM, Giuseppe wrote:
Hi all,
i'm trying to install LTIB for configure my kernel for imx53 QSB board.
I want install ubuntu with driver for SIERRA SL8092 modem HSPA.
I'm newbie. How i can do?
i have this error when i write./ltib:

I ran the command: sudo -S -l which returned:

Matching Defaults entries for giuseppe on this host:

User giuseppe may run the following commands on this host:
    (root) NOPASSWD: /usr/bin/rpm, (root) /opt/freescale/ltib/usr/bin/rpm
    (ALL) ALL

This means you don't have sudo permission to execute rpm commands as root
without a password.  This is needed for this build script to operate correctly.

To configure this, as root using the command "/usr/sbin/visudo",
and add the following line in the User privilege section:

giuseppe ALL = NOPASSWD: /usr/bin/rpm, /opt/ltib/usr/bin/rpm

Giuseppe, you need to modify /etc/sudoers (run "sudo /usr/sbin/visudo") to allow you to run "/opt/ltib/user/bin/rpm" - it shows you can run "/opt/freescale/ltib/user/bin/rpm".  Make that change and this error should go away...

Peter Barada

reply via email to

[Prev in Thread] Current Thread [Next in Thread]