Subject: [Ltib] JFFS2 crc
I have started the phase of our project where we are weaning
off NFS and using JFFS2. Now my understanding is the flash should work
just like a normal drive but I am seeing errors about failed CRCs that I
don’t understand. Is this normal or do we have a real problem
here? Also, if it is normal, is there a way to suppress these messages
and or automatic checks. The following is what I see.
address@hidden /]# JFFS2 notice: (309) check_node_data: wrong
data CRC in data node at 0x01dd4000: read 0x971bfcf, calculated 0xe401df4b.
JFFS2 notice: (309) check_node_data: wrong data CRC in data
node at 0x01dd59b0: read 0x7299d564, calculated 0x4a339945.
Senior Product Development Engineer
12612 Challenger Pkwy
Office: (407) 926-6983
Mobile: (407) 595-7023
Fax: (407) 857-1635
Notice of Confidentiality:
This e-mail communication and the attachments hereto, if any, are
intended solely for the information and use of the addressee(s) identified
above and may contain information which is legally privileged and/or otherwise
confidential. If a recipient of this e-mail communication is not an addressee
(or an authorized representative of an addressee), such recipient is hereby
advised that any review, disclosure, reproduction, re-transmission or other
dissemination or use of this e-mail communication (or any information contained
herein) is strictly prohibited. If you are not an addressee and have received
this e-mail communication in error, please advise the sender of that
circumstance either by reply e-mail or by telephone at (800) 238-2686,
immediately delete this e-mail communication from any computer and destroy all
physical copies of same.