RE: [Ltib] Freescale Ltib fails

[Yin Olivia-R63875]

Hi Giorgio,

fsl-gui-imx51-9.6.0.tar.gz, is not GNOME, but is a Freescale proprietary
GUI that MAD no longer supports. 

Section 3.3 of the attached Release Notes for the i.MX51 Linux BSP
provides some documentation for building the GNOME GUI with LTIB using
the SDK 1.6 BSP release.
Linux BSP version SDK 1.6 is available on Freescale.com on the downloads
tab of the page
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MCIMX51EV
KJ

Regards,
Olivia

> -----Original Message-----
> From: address@hidden 
> [mailto:address@hidden 
> On Behalf Of Ing. Giorgio Marinangeli
> Sent: Friday, December 11, 2009 11:56 PM
> To: address@hidden
> Subject: [Ltib] Freescale Ltib fails
> 
> Hi,
> I am trying to build differents images using the available 
> package profile on freescale LTIB.
> 
> Only:
>  - use packages in preconfig (Min profile) ,
>  - Minimum bootable root filesystem ,
>  - Qtopia 2 Release packages
>  seems to work fine.
> 
> 
> When I select:
>  - Fl Gui release package 
> 
> the build process fails.
> 
> This is the console output:
> 
> --------------------------------------------------------------------
> [......]
> 
>  Processing: fsl-gui-imx51
> ===========================
> Build path taken because: no prebuilt rpm, Testing network 
> connectivity OK GPP: 
> 
> Try fsl-gui-imx51-9.6.0.tar.gz.md5 from the GPP
> http://bitshrine.org/gpp/fsl-gui-imx51-9.6.0.tar.gz.md5:
> 16:09:30 ERROR 404: Not Found.
> Try fsl-gui-imx51-9.6.0.tar.gz from the GPP
> http://bitshrine.org/gpp/fsl-gui-imx51-9.6.0.tar.gz:
> 16:09:31 ERROR 404: Not Found.
> Can't get: fsl-gui-imx51-9.6.0.tar.gz at ./ltib line 790.
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:560
> 
> [....]
> 
> These packages failed to build:
> fsl-gui-imx51
> --------------------------------------------------------------------
> 
> In this case, LTIB can't get fsl-gui-imx51-9.6.0.tar.gz.md5 
> 
> Where can I find this file?
> 
> 
> When I select package profile called:
> 
> - All supported packages   
> 
> the build process fails too.
> 
> This is the console output:
> 
> --------------------------------------------------------------------
> [......]
> 
> make[2]: Entering directory
> `/home/giorgio/freescale_EVM/ltib/rpm/BUILD/dbus-glib-0.76/tools'
> make[2]: Circular dbus-bus-introspect.xml <- 
> dbus-bus-introspect.xml dependency dropped.
> dbus-binding-tool --mode=glib-client --prefix=dbus_bus 
> --output=dbus-glib-bindings.h dbus-bus-introspect.xml
> /bin/bash: dbus-binding-tool: command not found
> make[2]: *** [dbus-glib-bindings.h] Error 127
> make[2]: Leaving directory
> `/home/giorgio/freescale_EVM/ltib/rpm/BUILD/dbus-glib-0.76/tools'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory
> `/home/giorgio/freescale_EVM/ltib/rpm/BUILD/dbus-glib-0.76'
> make: *** [all] Error 2
> error: Bad exit status
> from /home/giorgio/freescale_EVM/ltib/tmp/rpm-tmp.13814 (%build)
> 
> RPM build errors:
>     Bad exit status
> from /home/giorgio/freescale_EVM/ltib/tmp/rpm-tmp.13814 
> (%build) Build time for dbus-glib: 20 seconds
> 
> Failed building dbus-glib
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:560
> 
> [....]
> 
> These packages failed to build:
> dbus-glib 
> 
> Build Failed
> 
> ---------------t-----------------------------------------------------
> 
> When I select package profile called:
> 
> - FSL gnome release package  
> 
> the build process fails too.
> 
> This is the console output:
> 
> --------------------------------------------------------------------
> [......]
> make[2]: Entering directory
> `/home/giorgio/freescale_EVM/ltib/rpm/BUILD/dbus-glib-0.76/tools'
> make[2]: Circular dbus-bus-introspect.xml <- 
> dbus-bus-introspect.xml dependency dropped.
> dbus-binding-tool --mode=glib-client --prefix=dbus_bus 
> --output=dbus-glib-bindings.h dbus-bus-introspect.xml
> /bin/bash: dbus-binding-tool: command not found
> make[2]: *** [dbus-glib-bindings.h] Error 127
> make[2]: Leaving directory
> `/home/giorgio/freescale_EVM/ltib/rpm/BUILD/dbus-glib-0.76/tools'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory
> `/home/giorgio/freescale_EVM/ltib/rpm/BUILD/dbus-glib-0.76'
> make: *** [all] Error 2
> error: Bad exit status
> from /home/giorgio/freescale_EVM/ltib/tmp/rpm-tmp.24371 (%build)
> 
> 
> RPM build errors:
>     Bad exit status
> from /home/giorgio/freescale_EVM/ltib/tmp/rpm-tmp.24371 (%build)
> Build time for dbus-glib: 21 seconds
> 
> Failed building dbus-glib
> 
> 
> f_buildrpms() returned an error, exiting
> traceback:
>  main:560
> 
> [...]
> 
> These packages failed to build:
> dbus-glib 
> 
> Build Failed
> 
> --------------------------------------------------------------------
> 
> could someone give me a suggestion?
> I am particularly interested in FSL package gnome release package.
> 
> 
> Thanks.
> Giorgio.
> 
> 
> 
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib
> 
>