RE : [Ltib] Enable mtdparts command at u-boot prom pt

[Marc Titinger]

Hi Vijay,

looking at cmd_jffs2.c the definition of the mtdparts command seems to depend upon CONFIG_JFFS2_CMDLINE being defined,
I have CONFIG_CMD_NAND, CONFIG_JFFS2, CONFIG_CMD_JFFS2 set as well in my include/configs/ file. Maybe you need to define one of those too, and recompile u-boot.

hope this helped,

Marc.





-------- Message d'origine--------
De: address@hidden de la part de Vijay Nikam
Date: mer. 03/06/2009 11:45
À: ltibext
Objet : [Ltib] Enable mtdparts command at u-boot prompt

Hello All,

Sorry to send the email directly ... Perhaps the query I would like to
ask is may be of-topic for LTIB mailing list. But need some help

I have u-boot-1.3.0 running on mpc8313erdb board, and we have received
it with the bsp from freescale. Anyways the u-boot is fine. But they
have disabled 'mtdparts' command. And I would like to enable
"mtdparts" command.

I read the section 5.9.3.5 regarding mtd partition creation ... I did
the changes according to this section, but I could not able to find
option to enable "mtdparts" command enable.
(http://www.denx.de/wiki/view/DULG/UBootCmdGroupFlash#Section_5.9.3.5)

By any chance if you might have information regarding mtdparts
command, so could you please let me know the approach to how to enable
the mtdparts command, to do the dynamic partition enable ? ? ? Also do
I need to modify the dts file with respect to partition requirement ?
? ?

Kindly please acknowledge ... thank you.

Kind Regards,
Vijay Nikam


_______________________________________________
LTIB home page: http://bitshrine.org

Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib