RE: [Ltib] Building xorg-server; missing dependencies?

[Alexandre Paradis]

Hi Stuart,

The symlink exists:

dev-station ltib # ls -l rootfs/usr/lib/libX11.so lrwxrwxrwx 1 root root 15 Feb 
26 18:28 rootfs/usr/lib/libX11.so -> libX11.so.6.2.0

And this is my sys_lib variable value:

dev-station ltib # libtool --config | grep sys_lib_search_path_spec=
sys_lib_search_path_spec="/usr/lib/gcc/i686-pc-linux-gnu/4.1.2 
/usr/i686-pc-linux-gnu/lib /usr/lib /lib"

I added the perl line in my evas.spec file, but no luck

I've attached my spec file and the whole ltib output if it can help you

Thanks,

Alex


-----Original Message-----
From: Stuart Hughes [mailto:address@hidden 
Sent: February 27, 2009 11:20 AM
To: Alexandre Paradis
Cc: address@hidden
Subject: RE: [Ltib] Building xorg-server; missing dependencies?

Hi Alex,

evas builds okay for me.  If I look at the build log (attached) I see a 
difference at the point you encounter a failure.  In yours you have an explicit 
reference to "/usr/lib/libX11.so" which is causing your problem.  In mine the 
line is just "-L/usr/X11R6/lib -lX11 -lXext"

gcc
-shared  .libs/evas_engine.o .libs/evas_outbuf.o .libs/evas_x_buffer.o 
.libs/evas_x_color.o .libs/evas_x_main.o  -L/usr/X11R6/lib -lX11 -lXext 
-L/home/seh/ltib_bsps/savannah_ltib/tmp/evas//opt/freescale/rootfs/ppc/usr/lib 
-L/usr/lib -levas  -Wl,-soname -Wl,module.so -o .libs/module.so

However, even this looks suspect as I don't like the -L/usr/X11R6/lib.
I think I may be getting away with this though as it finds my 
rootfs/usr/lib/libX11.so first (I'm not sure).

Can you check that you have this:

$ ls -l rootfs/usr/lib/libX11.so
lrwxrwxrwx  1 root root 15 Feb 27 14:37 rootfs/usr/lib/libX11.so ->
libX11.so.6.2.0*

If not, make sure you have X11 turned on in the build

Looking at the package, normally problems like this are cause by references to 
bad paths in libtool in the sys_lib_search_path_spec= variable. However mine 
looks okay (libtool is auto-generated, so look at yours).

Just in case it is this, can you try the following change (add the perl edit 
line) to dist/lfs-5.1/evas/evas.spec ./configure --prefix=%{_prefix} 
--host=$CFGHOST --build=%{_build} $XTRA_OPTS CFLAGS="-O0 -g"
perl -pi -e 's,^sys_lib_search_path_spec=.*,sys_lib_search_path_spec=,' libtool 
make

Regards, Stuart

On Fri, 2009-02-27 at 08:24 -0500, Alexandre Paradis wrote:
> Hi Stuart,
> 
> Doing "find rootfs -name \*.la" doesn't output any files
> 
> Thanks,
> 
> --
> Alex
> 
> -----Original Message-----
> From: Stuart Hughes [mailto:address@hidden
> Sent: February 27, 2009 3:35 AM
> To: Alexandre Paradis
> Cc: address@hidden
> Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> 
> Hi Alex,
> 
> The link is incorrectly picking up libraries from /usr/lib.  Can you 
> do
> 
> $ find rootfs -name \*.la
> 
> If you see any of these files, that would cause the problem.  If you 
> do find them, can you then do:
> 
> $ rpm --root `pwd`/rootfs -qif /path/to/file.la
> 
> This will identify which package is putting these bad (for cross
> compile) files into the rootfs.
> 
> Regards, Stuart
> 
> On Thu, 2009-02-26 at 13:24 -0500, Alexandre Paradis wrote:
> > Hi,
> > 
> > I installed the host components successfully.
> > 
> > However the "evas" package also doesn't build:
> > 
> > /bin/sh ../../../../libtool --tag=CC --mode=link gcc  -O0 -g   -o module.la 
> > -rpath /usr/lib/evas/modules/engines/software_x11/linux-gnu-powerpc -module 
> > -avoid-version evas_engine.lo evas_outbuf.lo evas_x_buffer.lo 
> > evas_x_color.lo evas_x_main.lo -L/usr/X11R6/lib -lX11 -lXext -lX11 -lXext 
> > -lX11 -lXext -lX11 -lXext ../../../../src/lib/libevas.la
> > gcc -shared  .libs/evas_engine.o .libs/evas_outbuf.o 
> > .libs/evas_x_buffer.o .libs/evas_x_color.o .libs/evas_x_main.o  
> > -Wl,--rpath 
> > -Wl,/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src/lib/.libs 
> > -L/usr/X11R6/lib /usr/lib/libX11.so /usr/lib/libXext.so 
> > ../../../../src/lib/.libs/libevas.so  -Wl,-soname -Wl,module.so -o 
> > .libs/module.so
> > /usr/lib/libX11.so: could not read symbols: File in wrong format
> > collect2: ld returned 1 exit status
> > make[5]: *** [module.la] Error 1
> > make[5]: Leaving directory 
> > `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src/modules/engines/software_x11'
> > make[4]: *** [all-recursive] Error 1
> > make[4]: Leaving directory 
> > `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src/modules/engines'
> > make[3]: *** [all-recursive] Error 1
> > make[3]: Leaving directory 
> > `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src/modules'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory 
> > `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory 
> > `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050'
> > make: *** [all] Error 2
> > error: Bad exit status from 
> > /home/alex/savannah/ltib/tmp/rpm-tmp.3990 (%build)
> > 
> > 
> > RPM build errors:
> >     Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.3990 
> > (%build) Build time for evas: 28 seconds
> > 
> > 
> > It's including the wrong /usr/lib folder?
> > 
> > 
> > Alex
> > 
> > -----Original Message-----
> > From: Stuart Hughes [mailto:address@hidden
> > Sent: February 26, 2009 12:49 PM
> > To: Alexandre Paradis
> > Cc: address@hidden
> > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > 
> > Hi Alex,
> > 
> > You need to install some host components first, see:
> > 
> > http://www.libertatia.org/blog/?p=66
> > 
> > Basically:
> > 
> >     $ ./ltib –hostcf -p eet.spec
> >         $ ./ltib –hostcf -p embryo.spec
> >         $ ./ltib –hostcf -p evas.spec
> >         $ ./ltib –hostcf -p ecore.spec
> >         $ ./ltib –hostcf -p edje.spec
> >         
> > The startup instructions are out of date, all you need to do is 'startx'
> > last time I tried.
> > 
> > Regards, Stuart
> > 
> > On Thu, 2009-02-26 at 12:31 -0500, Alexandre Paradis wrote:
> > > Hi Stuart,
> > > 
> > > The libjpeg built successfully, thanks.
> > > 
> > > I'm at currently at building enlightenment, and the "emotion" package 
> > > failed to build:
> > > 
> > > [snip...]
> > > Making all in data
> > > make[2]: Entering directory 
> > > `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042/data'
> > > edje_cc -v -id ../data -fd ../data \
> > >         ../data/theme.edc \
> > >         ../data/theme.edj
> > > make[2]: edje_cc: Command not found
> > > make[2]: *** [theme.edj] Error 127
> > > make[2]: Leaving directory 
> > > `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042/data'
> > > make[1]: *** [all-recursive] Error 1
> > > make[1]: Leaving directory 
> > > `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042'
> > > make: *** [all] Error 2
> > > error: Bad exit status from 
> > > /home/alex/savannah/ltib/tmp/rpm-tmp.88468 (%build)
> > > 
> > > 
> > > RPM build errors:
> > >     Bad exit status from 
> > > /home/alex/savannah/ltib/tmp/rpm-tmp.88468 (%build) Build time for 
> > > emotion: 14 seconds
> > > 
> > > Failed building emotion
> > > 
> > > 
> > > f_buildrpms() returned an error, exiting
> > > traceback:
> > >  main:552
> > > 
> > > 
> > > Started: Thu Feb 26 12:19:41 2009
> > > Ended:   Thu Feb 26 13:27:17 2009
> > > Elapsed: 4056 seconds
> > > 
> > > These packages failed to build:
> > > emotion
> > > 
> > > Build Failed
> > > 
> > > Exiting on error or interrupt
> > > 
> > > 
> > > 
> > > The edje package built successfully, and I do have "edje_cc" in my root 
> > > fs:
> > > address@hidden ~/savannah/ltib $ locate edje_cc 
> > > /home/alex/savannah/ltib/rootfs/usr/bin/edje_cc
> > > 
> > > Any ideas?
> > > 
> > > Thanks!
> > > --
> > > Alex
> > > 
> > > -----Original Message-----
> > > From: Stuart Hughes [mailto:address@hidden
> > > Sent: February 26, 2009 10:40 AM
> > > To: Alexandre Paradis
> > > Cc: address@hidden
> > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > 
> > > Hi Alex,
> > > 
> > > Glad it was something straightforward.  I'd be inclined to not 
> > > trust anything you built so far and do (save any work first!)
> > > 
> > > $ rm -rf rpm/BUILD/*
> > > $ ./ltib -f
> > > 
> > > This will force rebuild everything.
> > > 
> > > Regards, Stuart
> > > 
> > > On Thu, 2009-02-26 at 10:12 -0500, Alexandre Paradis wrote:
> > > > Hi Stuart
> > > > 
> > > > You're right, I had a misconfiguration on my system.
> > > > 
> > > > When I did the commands in the ltib shell, it displayed the powerpc 
> > > > gcc, not my native one.
> > > > 
> > > > The problem was that for some reason I can't remember, I had made 
> > > > dynamic links to various powerpc-e300c3-linux-gnu-* files, one of them 
> > > > with the name "gcc".
> > > > 
> > > > Stupid mistake of mine, I removed them and now your test shows the 
> > > > correct gcc version (my native one).
> > > > 
> > > > Thanks a LOT for your help.  I'll try building again.
> > > > 
> > > > --
> > > > Alex
> > > > 
> > > > 
> > > > -----Original Message-----
> > > > From: Stuart Hughes [mailto:address@hidden
> > > > Sent: February 26, 2009 8:43 AM
> > > > To: Alexandre Paradis
> > > > Cc: address@hidden
> > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > 
> > > > Hi Alex,
> > > > 
> > > > I just tried the same thing (copy config/platform/mpc5121ads -> 
> > > > Savannah CVS copy).  I then ran ltib to configure and build 
> > > > this.  It builds libjpeg without any problem.
> > > > 
> > > > Processing platform: Freescale MPC512x based boards 
> > > > =====================================================
> > > > using config/platform/mpc5121ads/.config
> > > > [snip]
> > > > Executing(%build): /bin/sh
> > > > -e /home/seh/ltib_bsps/savannah_ltib/tmp/rpm-tmp.60945
> > > > + umask 022
> > > > + cd /home/seh/ltib_bsps/savannah_ltib/rpm/BUILD
> > > > + cd jpeg-6b
> > > > + export
> > > > PATH=/home/seh/ltib_bsps/savannah_ltib/bin:/opt/ltib/usr/bin:/op
> > > > t/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-
> > > > linux-gnu/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11
> > > > R6/bin
> > > > +
> > > > PATH=/home/seh/ltib_bsps/savannah_ltib/bin:/opt/ltib/usr/bin:/op
> > > > t/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-
> > > > linux-gnu/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11
> > > > R6/bin
> > > > + ./configure --enable-static --enable-shared 
> > > > + --target=powerpc-linux
> > > > --prefix=/usr
> > > > checking for gcc... gcc
> > > > checking whether the C compiler (gcc  ) works... yes checking 
> > > > whether the C compiler (gcc  ) is a cross-compiler... no 
> > > > checking whether we are using GNU C... yes checking how to run 
> > > > the C preprocessor... gcc -E checking for function prototypes... 
> > > > yes checking for stddef.h... yes ...
> > > > 
> > > > The key difference between this and your output is:
> > > > 
> > > > checking whether the C compiler (gcc  ) is a cross-compiler... 
> > > > no
> > > > 
> > > > You're says:
> > > > >> checking whether the C compiler (gcc  ) is a 
> > > > >> cross-compiler... yes
> > > > 
> > > > It looks like you have some miss configuration as it should be 
> > > > finding the build machines native C compiler.
> > > > 
> > > > Let me explain a bit.   If you look at the spec file you'll see:
> > > > 
> > > > %Build
> > > > export PATH=$UNSPOOF_PATH
> > > > ./configure --enable-static --enable-shared --target=$CFGHOST 
> > > > --prefix= %{_prefix} export PATH=$SPOOF_PATH make
> > > > 
> > > > This is a bit unusual inasmuch that configure is done without 
> > > > spoofing (e.g. gcc is not an alias for the cross compiler, or should 
> > > > not be).
> > > > >From my notes this is because:
> > > > 
> > > > Get libjpeg to cross compile by using UNSPOOF_PATH for 
> > > > ./configure and SPOOF_PATH for make.  All this is necessary 
> > > > because ./configure calls ltconfig which inturn calls 
> > > > config.guess which trys to compile and run a test .c program using the 
> > > > first gcc in its path.
> > > > 
> > > > To get to the bottom of this, can you run the following:
> > > > 
> > > > $ ./ltib -m shell
> > > > LTIB> export PATH=$UNSPOOF_PATH
> > > > LTIB> which gcc
> > > > ...
> > > > LTIB> gcc -v
> > > > ...
> > > > LTIB> exit
> > > > $
> > > > 
> > > > The output will show which compiler gcc is.  It should be the 
> > > > native one on your build machine.  For example mine shows:
> > > > 
> > > > LTIB> which gcc
> > > > /usr/bin/gcc
> > > > 
> > > > LTIB> gcc -v
> > > > Using built-in specs.
> > > > Target: i386-redhat-linux
> > > > Configured with: ../configure --prefix=/usr 
> > > > --mandir=/usr/share/man --infodir=/usr/share/info 
> > > > --enable-shared --enable-threads=posix --enable-checking=release 
> > > > --with-system-zlib --enable-__cxa_atexit 
> > > > --disable-libunwind-exceptions --enable-libgcj-multifile 
> > > > --enable-languages=c,c++,objc,java,f95,ada --enable-java-awt=gtk 
> > > > --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre
> > > > --host=i386-redhat-linux
> > > > Thread model: posix
> > > > gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)
> > > > 
> > > > Regards, Stuart
> > > > 
> > > > On Wed, 2009-02-25 at 11:23 -0500, Alexandre Paradis wrote:
> > > > > Hi Stuart,
> > > > > 
> > > > > Here is the LTIB output using Savannah CVS, and my config file.
> > > > > 
> > > > > Thanks,
> > > > > 
> > > > > --
> > > > > Alex
> > > > > 
> > > > > -----Original Message-----
> > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > Sent: February 25, 2009 9:50 AM
> > > > > To: Alexandre Paradis
> > > > > Cc: address@hidden
> > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > 
> > > > > Hi Alex,
> > > > > 
> > > > > You're on the wrong track here I think.  You should not need to do 
> > > > > this.
> > > > > 
> > > > > Anything under rpm/BUILD is not under CVS and so is generated.  
> > > > > If this build is failing, removed rpm/BUILD/_failed_package_ and then 
> > > > > re-try.
> > > > > 
> > > > > If that doesn't work please post the LTIB output.  I need to 
> > > > > know the command you ran, which LTIB (Savannah?) and also 
> > > > > which configuration you're using (cat .config and then send me
> > > > > config/platform/_target_/.config)
> > > > > 
> > > > > Regards, Stuart
> > > > > 
> > > > > On Wed, 2009-02-25 at 09:27 -0500, Alexandre Paradis wrote:
> > > > > > OK, I fixed it by replacing the config.sub and config.guess 
> > > > > > from 
> > > > > > http://cvs.savannah.gnu.org/viewvc/~checkout~/config/config/
> > > > > > 
> > > > > > I replaced them in the 
> > > > > > /home/alex/savannah/ltib/rpm/BUILD/jpeg-6b then re-ran 
> > > > > > ./ltib
> > > > > > 
> > > > > > Is this something that would need to be added to the GPP package?
> > > > > > 
> > > > > > --
> > > > > > Alex
> > > > > > 
> > > > > > -----Original Message-----
> > > > > > From: address@hidden 
> > > > > > [mailto:address@hidden On 
> > > > > > Behalf Of Alexandre Paradis
> > > > > > Sent: February 25, 2009 9:01 AM
> > > > > > To: Stuart Hughes
> > > > > > Cc: address@hidden
> > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > > 
> > > > > > Hi Stuart,
> > > > > > 
> > > > > > libjpeg failed to build:
> > > > > > 
> > > > > > /// OUTPUT ///
> > > > > > checking host system type... ./config.guess: line 618: 
> > > > > > ./dummy: cannot execute binary file
> > > > > > ./config.guess: line 848: ./dummy: cannot execute binary 
> > > > > > file
> > > > > > ltconfig: cannot guess host type; you must specify one Try 
> > > > > > `ltconfig --help' for more information.
> > > > > > checking libjpeg version number... 62 creating 
> > > > > > ./config.status creating Makefile creating jconfig.h
> > > > > > + export
> > > > > > + PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/hom
> > > > > > + e/alex/savan 
> > > > > > + nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gc
> > > > > > + c-4.1.78-egl 
> > > > > > + ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/
> > > > > > + usr/bin:/bin :/usr/bin/X11:/usr/X11R6/bin 
> > > > > > + PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/hom
> > > > > > + e/alex/savan 
> > > > > > + nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gc
> > > > > > + c-4.1.78-egl 
> > > > > > + ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/
> > > > > > + usr/bin:/bin :/usr/bin/X11:/usr/X11R6/bin make
> > > > > > ./libtool --mode=compile gcc -O2  -I. -c ./jcapimin.c
> > > > > > make: ./libtool: Command not found
> > > > > > make: *** [jcapimin.lo] Error 127
> > > > > > error: Bad exit status from 
> > > > > > /home/alex/savannah/ltib/tmp/rpm-tmp.15054 (%build)
> > > > > > 
> > > > > > 
> > > > > > RPM build errors:
> > > > > >     Bad exit status from 
> > > > > > /home/alex/savannah/ltib/tmp/rpm-tmp.15054 (%build) Build 
> > > > > > time for libjpeg: 2 seconds /// END OUTPUT ///
> > > > > > 
> > > > > > 
> > > > > > I do have libtool installed on my system, but it seems it's 
> > > > > > trying to run it from the local folder? (./libtool)
> > > > > > 
> > > > > > 
> > > > > > --
> > > > > > Alex
> > > > > > 
> > > > > > -----Original Message-----
> > > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > > Sent: February 25, 2009 4:00 AM
> > > > > > To: Alexandre Paradis
> > > > > > Cc: address@hidden
> > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > > 
> > > > > > Hi Alex,
> > > > > > 
> > > > > > cross-gdb/gdbserver should also build.  If you want those later we 
> > > > > > can try to debug what is wrong.
> > > > > > 
> > > > > > Regards, Stuart
> > > > > > 
> > > > > > On Tue, 2009-02-24 at 16:44 -0500, Alexandre Paradis wrote:
> > > > > > > I think I just selected the wrong gdb package in the list.
> > > > > > > 
> > > > > > > I'm rebuilding with the native gdb package instead 
> > > > > > > (without cross-gdb and gdbserver), and it didn't stop this 
> > > > > > > time, so you can ignore my last question ;)
> > > > > > > 
> > > > > > > --
> > > > > > > Alex
> > > > > > > 
> > > > > > > -----Original Message-----
> > > > > > > From: address@hidden
> > > > > > > [mailto:address@hidden On 
> > > > > > > Behalf Of Alexandre Paradis
> > > > > > > Sent: February 24, 2009 4:14 PM
> > > > > > > To: Stuart Hughes
> > > > > > > Cc: address@hidden
> > > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > > > 
> > > > > > > Hi Stuart,
> > > > > > > 
> > > > > > > Things are moving along.. ;)
> > > > > > > 
> > > > > > > Going forth with option #2, I performed the following as 
> > > > > > > per your advice
> > > > > > > 
> > > > > > > 1. Checkout the current CVS 2. Copied the MPC5121 configs 
> > > > > > > from the old BSP to the latest version 3. Configured my 
> > > > > > > packages (the build process failed before I did the next 
> > > > > > > step) 4. ** Copied the *mpc5121*.spec files for u-boot and 
> > > > > > > the kernel from my old BSP to the latest dist/lfs/ folders
> > > > > > > 
> > > > > > > I re-started the build process, and everything seemed to work, 
> > > > > > > except when it got to the GDB package.
> > > > > > > 
> > > > > > > It's complaining that it can't execute compiled binaries 
> > > > > > > (obviously since we're cross-compiling), and says that I should 
> > > > > > > add the "--host" flag:
> > > > > > >   
> > > > > > >   checking whether the C compiler works... configure: error: 
> > > > > > > cannot run C compiled programs.
> > > > > > >   If you meant to cross compile, use `--host'.
> > > > > > >   See `config.log' for more details.
> > > > > > >   error: Bad exit status from
> > > > > > > /home/alex/savannah/ltib/tmp/rpm-tmp.74257 (%build)
> > > > > > > 
> > > > > > > While I don’t necessarily *need* GDB, it'd be nice to have it.  
> > > > > > > Where would I add this flag?
> > > > > > > 
> > > > > > > Thanks a lot for your help!
> > > > > > > 
> > > > > > > --
> > > > > > > Alex
> > > > > > > 
> > > > > > > 
> > > > > > > -----Original Message-----
> > > > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > > > Sent: February 23, 2009 10:22 AM
> > > > > > > To: Alexandre Paradis
> > > > > > > Cc: address@hidden
> > > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > > > 
> > > > > > > Hi Alex,
> > > > > > > 
> > > > > > > If you go for option 2:
> > > > > > > 
> > > > > > > * checkout Savannah CVS
> > > > > > > * do a cp -a old_bsp/config/platform/mpc5121ads
> > > > > > > savannah/config/platform/
> > > > > > > * cd  savannah
> > > > > > > * ./ltib
> > > > > > > * select mpc5121ads
> > > > > > > * let it build the default and check it works for you
> > > > > > > * ./ltib -m config
> > > > > > > * select the X11 stuff
> > > > > > > * ./ltib
> > > > > > > * let it build
> > > > > > > 
> > > > > > > The Savannah copy has nothing pre-built, so in effect you are 
> > > > > > > starting from clean.
> > > > > > > 
> > > > > > > If you want your old BSP back to it's original pristine state you 
> > > > > > > can do (in old_bsp):
> > > > > > > ./ltib --preconfig config/platform/mpc5121ads/defconfig
> > > > > > > 
> > > > > > > Regards, Stuart
> > > > > > > 
> > > > > > > On Mon, 2009-02-23 at 09:48 -0500, Alexandre Paradis wrote:
> > > > > > > > The BSP is dated 2008-12-08, which seems to be the latest 
> > > > > > > > version they have.
> > > > > > > > 
> > > > > > > > I'll go for option #2.
> > > > > > > > 
> > > > > > > > Should I clean everything since I already added packages using 
> > > > > > > > the wrong commands?
> > > > > > > > 
> > > > > > > > --
> > > > > > > > Alex
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > -----Original Message-----
> > > > > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > > > > Sent: February 23, 2009 9:31 AM
> > > > > > > > To: Alexandre Paradis
> > > > > > > > Cc: address@hidden
> > > > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > > > > 
> > > > > > > > Hi Alex,
> > > > > > > > 
> > > > > > > > I guess you're using an older Freescale BSP?
> > > > > > > > 
> > > > > > > > If so your best bet is to try this:
> > > > > > > > 
> > > > > > > > 1/ Ask Freescale if they have a later BSP (the X11 stuff 
> > > > > > > > went in around Nov/Dec last year IIRC).
> > > > > > > > 
> > > > > > > > 2/ If not, use the Savannah LTIB CVS and copy the
> > > > > > > > config/platform/mpc5121 you have into that copy.  I 
> > > > > > > > can't guarantee this will work, but at least you'll see the X11 
> > > > > > > > selections.
> > > > > > > > 
> > > > > > > > Regards, Stuart
> > > > > > > > 
> > > > > > > > On Mon, 2009-02-23 at 08:54 -0500, Alexandre Paradis wrote:
> > > > > > > > > Hi Stuart,
> > > > > > > > > 
> > > > > > > > > I can't find X11 in the package list.  Would I need to update 
> > > > > > > > > ltib for them to show up?
> > > > > > > > > 
> > > > > > > > > Thanks,
> > > > > > > > > 
> > > > > > > > > --
> > > > > > > > > Alex
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > > > > > Sent: February 23, 2009 3:52 AM
> > > > > > > > > To: Alexandre Paradis
> > > > > > > > > Cc: address@hidden
> > > > > > > > > Subject: Re: [Ltib] Building xorg-server; missing 
> > > > > > > > > dependencies?
> > > > > > > > > 
> > > > > > > > > Hi Alex,
> > > > > > > > > 
> > > > > > > > > That's the wrong way to add packages.  Run:
> > > > > > > > > 
> > > > > > > > > $ ./ltib -m config
> > > > > > > > > 
> > > > > > > > > Select:
> > > > > > > > > 
> > > > > > > > >     X11  --->
> > > > > > > > >     Install X11 (X.Org 7.3)  --->
> > > > > > > > > 
> > > > > > > > > And all the packages needed will be turned on.  You 
> > > > > > > > > probably want to also select some kind of window manager 
> > > > > > > > > (enlightenment maybe).
> > > > > > > > > Once done, save an exit then run:
> > > > > > > > > 
> > > > > > > > > $ ./ltib
> > > > > > > > > 
> > > > > > > > > NOTE: ./ltib -p <pkg> is normally only used if you're 
> > > > > > > > > developing a single package.  See the FAQ.
> > > > > > > > > 
> > > > > > > > > Regards, Stuart
> > > > > > > > > 
> > > > > > > > > On Fri, 2009-02-20 at 15:45 -0500, Alexandre Paradis wrote:
> > > > > > > > > > Hi,
> > > > > > > > > > 
> > > > > > > > > > I need to build the xorg-server package, but I seem 
> > > > > > > > > > to be missing some needed packages.
> > > > > > > > > > 
> > > > > > > > > > I'm currently using LTIB from a Freescale BSP for the 
> > > > > > > > > > MPC5121:
> > > > > > > > > > 
> > > > > > > > > >     address@hidden
> > > > > > > > > > ~/ltib/ltib-mpc5121ads-20081208/config/userspace $ 
> > > > > > > > > > cat ../../RELEASE_INFO
> > > > > > > > > >     Release date = Fri Feb 20 20:20:58 2009 UTC
> > > > > > > > > >     Release user = alex
> > > > > > > > > >     Release host = dev-station
> > > > > > > > > >     Release dir  = /home/alex/ltib/ltib-mpc5121ads-20081208
> > > > > > > > > >     CVS wtag     = none
> > > > > > > > > >     CVS tag      = none
> > > > > > > > > >     Release tag  = none
> > > > > > > > > >     App version  = 8.1.2
> > > > > > > > > >     CVS version  = 1.421.4.1
> > > > > > > > > >     git version  = none
> > > > > > > > > > 
> > > > > > > > > > I successfully added the some dependent packages 
> > > > > > > > > > using the following
> > > > > > > > > > commands:
> > > > > > > > > > 
> > > > > > > > > >     ./ltib -p pixman.spec
> > > > > > > > > >     ./ltib -p randrproto.spec
> > > > > > > > > >     ./ltib -p renderproto.spec
> > > > > > > > > >     ./ltib -p fixesproto.spec
> > > > > > > > > >     ./ltib -p damageproto.spec
> > > > > > > > > >     ./ltib -p xcmiscproto.spec
> > > > > > > > > >     ./ltib -p extproto.spec
> > > > > > > > > >     ./ltib -p xproto.spec
> > > > > > > > > >     ./ltib -p xtrans.spec
> > > > > > > > > >     ./ltib -p scrnsaverproto.spec
> > > > > > > > > >     ./ltib -p bigreqsproto.spec
> > > > > > > > > >     ./ltib -p resourceproto.spec
> > > > > > > > > >     ./ltib -p fontsproto.spec
> > > > > > > > > >     ./ltib -p inputproto.spec
> > > > > > > > > >     ./ltib -p kbproto.spec
> > > > > > > > > >     ./ltib -p videoproto.spec
> > > > > > > > > >     ./ltib -p compositeproto.spec
> > > > > > > > > >     ./ltib -p recordproto.spec
> > > > > > > > > >     ./ltib -p resourceproto.spec
> > > > > > > > > > 
> > > > > > > > > > However.. I'm still missing a couple of packages 
> > > > > > > > > > which I can't seem to find on the GPP, mainly 'xkbfile', 
> > > > > > > > > > 'xfont', 'xau' and 'fontenc'.
> > > > > > > > > > 
> > > > > > > > > > Where can I find these? Do I need to get them from a 
> > > > > > > > > > source tarball, and create my own package along with a 
> > > > > > > > > > .spec file?
> > > > > > > > > > 
> > > > > > > > > > Any help is greatly appreciated.
> > > > > > > > > > 
> > > > > > > > > > Thanks!
> > > > > > > > > > 
> > > > > > > > > > --
> > > > > > > > > > Alexandre Paradis
> > > > > > > > > > 
> > > > > > > > > > Alexandre Paradis, Technology Architect / Architecte 
> > > > > > > > > > technologique
> > > > > > > > > > 
> > > > > > > > > > bluberi gaming technologies inc.
> > > > > > > > > > Drummondville, Quebec  Canada
> > > > > > > > > > 819.475.5155 (telephone) 819.475.5156 (fax) 
> > > > > > > > > > bluberi.com
> > > > > > > > > >  
> > > > > > > > > > ----------------------------------------------------
> > > > > > > > > > ------------
> > > > > > > > > > --
> > > > > > > > > > -------- This e-mail and any attachments transmitted 
> > > > > > > > > > with it are personal, privileged and confidential and 
> > > > > > > > > > solely for the use of the individual to whom they are 
> > > > > > > > > > addressed and intended. If you have received this e-mail in 
> > > > > > > > > > error, please notify the sender by return e-mail. If you 
> > > > > > > > > > are not the intended recipient or if you believe that you 
> > > > > > > > > > are not, you are hereby notified that the dissemination, 
> > > > > > > > > > distribution, plagiarism or copying of this e-mail and 
> > > > > > > > > > attachments transmitted with it is strictly prohibited. 
> > > > > > > > > > NOTICE: We have taken reasonable precautions to prevent 
> > > > > > > > > > viruses from being present in this e-mail. We do not accept 
> > > > > > > > > > responsibility for any loss or damage arising from the use 
> > > > > > > > > > of this e-mail or attachments.
> > > > > > > > > >  
> > > > > > > > > > Ce courriel et les pièces jointes s’y rattachant sont de 
> > > > > > > > > > nature personnelle, privilégiée et confidentielle et pour 
> > > > > > > > > > l’usage exclusif du destinataire à qui ils sont adressés et 
> > > > > > > > > > destinés. Si vous avez reçu ce courriel par erreur, 
> > > > > > > > > > veuillez s’il vous plaît le renvoyer à l’expéditeur. Si 
> > > > > > > > > > vous n’êtes pas le bon destinataire ou si vous croyez ne 
> > > > > > > > > > pas l’être, nous vous informons immédiatement que la 
> > > > > > > > > > publication, distribution, diffusion, copie ou plagiat de 
> > > > > > > > > > ce courriel et de ses pièces jointes sont strictement 
> > > > > > > > > > interdits. AVERTISSEMENT : Nous avons pris des mesures 
> > > > > > > > > > raisonnables afin de prévenir toute propagation de virus 
> > > > > > > > > > par le biais de ce courriel. Nous n’accepterons donc aucune 
> > > > > > > > > > responsabilité pour des dommages ou pertes provenant de 
> > > > > > > > > > l’utilisation de ce courriel ou de ses pièces jointes.
> > > > > > > > > > ----------------------------------------------------
> > > > > > > > > > ------------
> > > > > > > > > > --
> > > > > > > > > > --------
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > _______________________________________________
> > > > > > > > > > LTIB home page: http://bitshrine.org
> > > > > > > > > > 
> > > > > > > > > > Ltib mailing list
> > > > > > > > > > address@hidden
> > > > > > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > > > > > > > 
> > > > > > > > > 
> > > > > > > > 
> > > > > > > 
> > > > > > 
> > > > > 
> > > > > _______________________________________________
> > > > > LTIB home page: http://bitshrine.org
> > > > > 
> > > > > Ltib mailing list
> > > > > address@hidden
> > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > 
> > > > _______________________________________________
> > > > LTIB home page: http://bitshrine.org
> > > > 
> > > > Ltib mailing list
> > > > address@hidden
> > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > 
> > 
>

evas.spec
Description: evas.spec

ltib.zip
Description: ltib.zip