[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Ltib] RE: Reg ltib
From: |
Makhija, Neha (IE10) |
Subject: |
[Ltib] RE: Reg ltib |
Date: |
Mon, 7 Jul 2008 15:59:31 +0530 |
Hi Stuart
I need your help!!
I have one embedded board with coldfire processor. Because of some reason in
the application, the drivers (Written by our team) are getting closed (whatever
are opened in the application). To debug the reason for kill of the application
by the kernel, I used the gdbserver and gdbclient generated by the ltib. It
showed "SEGMENTATION KILL" and I am not able to debug further. I tried the gdb
binary image available in the ltib folder but it didn't work.
Can you suggest me a way to debug the application through ltib ??
Secondly, To debug the Kernel drivers, one can use kdb and kgdb. But I am not
able to find the two in the ltib folder. Is there any other way to debug the
drivers through ltib?
Thanks in advance!!
Neha
-----Original Message-----
From: Stuart Hughes [mailto:address@hidden
Sent: Wednesday, November 28, 2007 3:56 PM
To: Makhija, Neha (IE10)
Cc: address@hidden
Subject: Re: Reg ltib
Hi Neha,
I'm not sure about the OOB data question, maybe others on this list or
even on the MTD mailing list know.
As far as your other options go, there are techniques for combining the
kernel and rootfs into a single image (it's a general technique that you
can find on various mailing list). However in my opinion for most cases
you get more flexibility by having the kernel and rootfs in separate
Flash partitions.
Regards, Stuart
On Wed, 2007-11-28 at 09:25 +0530, Makhija, Neha (IE10) wrote:
> Hi Stuart
>
>
>
> I am the member of the ltib mailing list. I have one doubt. I am
> having one kernel image which will take the file system through NFS
> and will download it on the board’s NAND flash. So I am having two
> images one is kernel image and second one is root file system image
> which is .jffs2. Now the requirement is that only one single image
> should be there to program the empty flash, ie I need to concatenate
> the two images. We need this because the final burning of the NAND
> flash will be done by the 3rd party vendor, so they want only image
> for the first time. To burn NAND flash, peedi programmer will be used.
> Peedi programmer takes care of the bad blocks in the NAND flash. What
> I want to know is, If I will concatenate the two images with the help
> of batch command will it work? I mean will it update the OOB table of
> the bad block as done by linux kernel while loading root file system
> image (JFFS2 image)?
>
>
>
> Basically I am not able to check where exactly the OOB table is
> getting updated for the root file system? Or Is there a way to
> generate the kernel and Root file system image altogether?
>
>
>
> Thanks in advance.
>
>
>
> Regards,
>
> Neha
>
>
>
>
- [Ltib] RE: Reg ltib,
Makhija, Neha (IE10) <=
- [Ltib] RE: Reg ltib, Stuart Hughes, 2008/07/07
- [Ltib] RE: Reg ltib, Makhija, Neha (IE10), 2008/07/07
- [Ltib] RE: Reg ltib, Stuart Hughes, 2008/07/07
- [Ltib] RE: Reg ltib, Makhija, Neha (IE10), 2008/07/08
- Re: [Ltib] RE: Reg ltib, Vijay Nikam, 2008/07/08
- RE: [Ltib] RE: Reg ltib, Makhija, Neha (IE10), 2008/07/08
- RE: [Ltib] RE: Reg ltib, Stuart Hughes, 2008/07/08
- RE: [Ltib] RE: Reg ltib, Makhija, Neha (IE10), 2008/07/08
- RE: [Ltib] RE: Reg ltib, Makhija, Neha (IE10), 2008/07/08
- RE: [Ltib] RE: Reg ltib, Stuart Hughes, 2008/07/08