[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Ltib] 2.6.24 for mpc8458amc
From: |
Stuart Hughes |
Subject: |
Re: [Ltib] 2.6.24 for mpc8458amc |
Date: |
Tue, 19 Feb 2008 11:47:59 +0000 |
Hi Maxime,
At this stage I think you'd probably get more help from the linux-ppc
kernel mailing list.
Regards, Stuart
On Tue, 2008-02-19 at 11:30 +0000, maxime louvel wrote:
> Thanks,
>
> I haven't been able to build the kernel without LTIB...
> I have tried to build it with an embedded compiler but get an internal
> assembler error....
>
> regards,
> Maxime
>
> On Feb 19, 2008 10:53 AM, Stuart Hughes <address@hidden> wrote:
> Hi Maxime,
>
> This is not really an LTIB question, you'd probably get more
> help on a
> linux-ppc kernel mailing list.
>
> Can you boot this kernel if built outside of LTIB? If so,
> which cross
> compiler did you use?
>
> Regards, Stuart
>
>
>
> On Tue, 2008-02-19 at 09:46 +0000, maxime louvel wrote:
> > Hi,
> >
> > I am trying to make a 2.6.24 vanilla kernel boot (an work
> fine in a
> > second time) on a mpc8548amc board.
> > I have got the last LTIB version from the public svn and add
> the
> > platform specific stuff from the sources of the current
> kernel running
> > on the cards.
> > What I have basically add is:
> > - a folder mpc8548amc, in the config/platform directory,
> which allow
> > to select the mpc8548amc as the supported platform in the
> first screen
> > of the LTIB installation
> > - add the following files:
> > - arch/ppc/configs/mpc8548amc_defconfig
> > - arch/ppc/configs/platforms/85xx/mpc_8548_amc.h and .c
> > - I have used the dts of an another platform (mpc8548cds)
> which seems
> > quite the same, but I haven't got any confirmation of that
> yet.
> >
> > When I am booting the kernel image built by LTIB here is
> what I get:
> >
> > AMC=> dhcp 0x1000000 uImage.amc.2.6.24
> > Speed: 1000, full duplex
> > BOOTP broadcast 1
> > DHCP client bound to address 10.255.255.2
> > Using eTSEC0 device
> > TFTP from server 0.0.0.0; our IP address is 10.255.255.2;
> sending
> > through gateway 10.1.1.1
> > Filename 'uImage.amc.2.6.24'.
> > Load address: 0x1000000
> > Loading: ##############################
> > ###################################
> >
> >
> #################################################################
> >
> >
> #################################################################
> >
> >
> #################################################################
> >
> >
> #################################################################
> > ###########################
> > done
> > Bytes transferred = 1802102 (1b7f76 hex)
> > AMC=> bootm 0x1000000
> > ## Booting image at 01000000 ...
> > Image Name: Linux-2.6.24
> > Image Type: PowerPC Linux Kernel Image (gzip compressed)
> > Data Size: 1802038 Bytes = 1.7 MB
> > Load Address: 00000000
> > Entry Point: 00000000
> > Verifying Checksum ... OK
> > Uncompressing Kernel Image ... OK
> >
> > No further messages...
> >
> > Does someone has an idea ?
> >
> > thanks,
> > Maxime
> >
> > --
> > Maxime Louvel
> > 0044 7964 5555 80
> > 43 Allen road
> > Whitemore reans
> > WV60AW Wolverhampton
> > United Kingdom
>
> > _______________________________________________
> > LTIB home page: http://bitshrine.org
> >
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
>
>
>
>
> --
> Maxime Louvel
> 0044 7964 5555 80
> 43 Allen road
> Whitemore reans
> WV60AW Wolverhampton
> United Kingdom