[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] Qtopia -> bluez-*-3*-> (dbus+alsa), ...

From: Stuart Hughes
Subject: Re: [Ltib] Qtopia -> bluez-*-3*-> (dbus+alsa), ...
Date: Mon, 11 Feb 2008 15:26:04 +0000

Hi Peter,

I've not worked on the imx27, but I do know that the older versions of
bluez don't require dbus (AFAIK).  Would the versions already in LTIB
work for you?

Part of the problem putting together any rootfs is the "plate of
spaghetti" dependency effect you get when you try to update a single

Regards, Stuart

On Mon, 2008-02-11 at 14:49 +0000, Peter Wurmsdobler wrote:
> Hello,
> And I simply wanted to get bluetooth to work on Qtopia on an imx27 ADS 
> board using ltib as far as possible.
> It turns out that QTopia requires BlueZ > 3.9. So I downloaded 
> Bluez-3.26 which requires dbus. So I downloaded dbus-1.0.2. To make dbus 
> compile, needed to be cahnged around line 722 such that it 
> contains an additional [ac_cv_have_abstract_sockets=no]. In addition, 
> "-lz" needs to be added to make dbus link againts libz.
> Now, move on to bluez-libs 3.26; compiles. Then bluez-utils: apparently 
> the ALSA data structure blueZ relies on has changed. audio/pcm_ioplug.h 
> requires the struct snd_pcm_ioplug_callback to contain a "delay" function.
> Anyhady has had any experience with alsaand bluex 3.26 for mx27?
> peter
> _______________________________________________
> LTIB home page:
> Ltib mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]