[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Variable slur thickness
From: |
Thomas Morley |
Subject: |
Re: Variable slur thickness |
Date: |
Fri, 11 Mar 2016 10:15:28 +0100 |
2016-03-11 10:01 GMT+01:00 Sharon Rosner <address@hidden>:
>> Thus again: how should it look, in cases where a broken slur has a
>> (very) long and a (very) short part?
>> Some average-thickness? Or something else?
>
> The problem is not with the broken slurs, but rather with the other slurs
> beginning on the second line. Look at the slurs on bars 15-16, 17-19, 20-23
> etc.
>
> Thanks
> Sharon
Ah, ok, got it.
This problem arose before.
One needs to set 'thickness before-line-breaking, but then you don't
have access to the control-points, as far as I remember.
I'm not sure there is any way, have to think about it.
Cheers,
Harm
- Variable slur thickness, Sharon Rosner, 2016/03/10
- Re: Variable slur thickness, tisimst, 2016/03/10
- Re: Variable slur thickness, Sharon Rosner, 2016/03/10
- Re: Variable slur thickness, tisimst, 2016/03/10
- Re: Variable slur thickness, Sharon Rosner, 2016/03/10
- Re: Variable slur thickness, Thomas Morley, 2016/03/10
- Re: Variable slur thickness, Sharon Rosner, 2016/03/10
- Re: Variable slur thickness, Thomas Morley, 2016/03/11
- Re: Variable slur thickness, Sharon Rosner, 2016/03/11
- Re: Variable slur thickness,
Thomas Morley <=
- Re: Variable slur thickness, Sharon Rosner, 2016/03/11
- Re: Variable slur thickness, Thomas Morley, 2016/03/11
- Re: Variable slur thickness, tisimst, 2016/03/11
- Re: Variable slur thickness, Sharon Rosner, 2016/03/11
- Re: Variable slur thickness, Thomas Morley, 2016/03/11
- Re: Variable slur thickness, tisimst, 2016/03/10
- Re: Variable slur thickness, Malte Meyn, 2016/03/10
- Re: Variable slur thickness, tisimst, 2016/03/10
- Re: Variable slur thickness, Thomas Morley, 2016/03/10