[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: convert-ly 2.17.6 does nothing
From: |
Noeck |
Subject: |
Re: convert-ly 2.17.6 does nothing |
Date: |
Mon, 19 Nov 2012 15:13:02 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux i686; rv:16.0) Gecko/20121028 Thunderbird/16.0.2 |
Hi Wim,
Am 19.11.2012 14:32, schrieb Wim van Dommelen:
> there is a possibility to set the locations of the executables
That's what I did from the start. It works for 2.14.2 and 2.16.0 (and it
tells you during conversion if that executable is not at the given path,
in case you have misspelled it). But Frescobaldi does not harmonize with
version 2.17.6 of lilypond.
My thoughts about the python-wrapper was not the cause, that's right.
> I repeat: check the paths!
I repeat: I did.
Cheers,
Joram
- Re: convert-ly 2.17.6 does nothing, (continued)
- Re: convert-ly 2.17.6 does nothing, Eluze, 2012/11/15
- Re: convert-ly 2.17.6 does nothing, Noeck, 2012/11/15
- Re: convert-ly 2.17.6 does nothing, Thomas Scharkowski, 2012/11/16
- Re: convert-ly 2.17.6 does nothing, Noeck, 2012/11/16
- Re: convert-ly 2.17.6 does nothing, Wim van Dommelen, 2012/11/16
- Re: convert-ly 2.17.6 does nothing, Noeck, 2012/11/17
- Re: convert-ly 2.17.6 does nothing, Noeck, 2012/11/17
- Re: convert-ly 2.17.6 does nothing, Federico Bruni, 2012/11/17
- Re: convert-ly 2.17.6 does nothing, Wim van Dommelen, 2012/11/19
- Re: convert-ly 2.17.6 does nothing, Federico Bruni, 2012/11/19
- Re: convert-ly 2.17.6 does nothing,
Noeck <=
- Re: convert-ly 2.17.6 does nothing, Thomas Scharkowski, 2012/11/17
- Re: convert-ly 2.17.6 does nothing, Federico Bruni, 2012/11/17
- Re: convert-ly 2.17.6 does nothing, Federico Bruni, 2012/11/17
- Message not available
- Re: convert-ly 2.17.6 does nothing, Thomas Scharkowski, 2012/11/16