;;;; paper.scm -- manipulate the paper and layout block.
;;;;
;;;;  source file of the GNU LilyPond music typesetter
;;;; 
;;;; (c) 2004--2007 Han-Wen Nienhuys <address@hidden>

(define-public (set-paper-dimension-variables mod)
  (module-define! mod 'dimension-variables
		  '(pt mm cm in staff-height staff-space
		       page-top-space
		       between-system-space between-system-padding
		       line-width indent short-indent paper-width paper-height horizontal-shift
		       staff-space line-thickness ledgerline-thickness
		       blot-diameter left-margin right-margin)))

(define (calc-line-thickness staff-space pt)
  ;; linear interpolation.

  ;; !! synchronize with feta-params.mf
  (let*
    ((x1 (* 4.125 pt))
     (x0 (* 5 pt))
     (f1 (* 0.47 pt))
     (f0 (* 0.50 pt)))

    (/
     (+
      (* f1 (- staff-space x0))
	   (* f0 (- x1 staff-space)))
     (- x1 x0))))

(define-public (layout-set-absolute-staff-size-in-module module staff-height)
  (let*
      ((pt (eval 'pt module))
       (ss (/ staff-height 4))
       (factor (/ staff-height (* 20 pt)))
       (setm! (lambda (sym val)
		(module-define! module sym val))))

    (setm! 'text-font-size (* 12 factor))
    
    (setm! 'output-scale ss)
    (setm! 'fonts
		    (if tex-backend?
			(make-cmr-tree factor)
			(make-century-schoolbook-tree factor)))
    (setm! 'staff-height staff-height)
    (setm! 'staff-space ss)

    (setm! 'line-thickness (calc-line-thickness ss pt))

    ;;  sync with feta  
    (setm! 'ledgerline-thickness (+ (* 0.5 pt) (/ ss 10)))

    ;;  sync with feta  
    (setm! 'blot-diameter (* 0.4 pt))
    ))

(define-public (layout-set-absolute-staff-size sz)
  "Function to be called inside a \\layout{} block to set the staff
size. SZ is in points"
  (layout-set-absolute-staff-size-in-module (current-module) sz))

(define-public (layout-set-staff-size sz)
  "Function to be called inside a \\layout{} block to set the staff
size. SZ is in points"

  (layout-set-absolute-staff-size (* (eval 'pt (current-module)) sz)))

(define-safe-public (set-global-staff-size sz)
  "Set the default staff size, where SZ is thought to be in PT."
  (let* ((current-mod (current-module))
	 (pap (eval '$defaultpaper current-mod))
	 (in-layout? (or (module-defined? current-mod 'is-paper)
			 (module-defined? current-mod 'is-layout)))

	 ; maybe not necessary.
	 ; but let's be paranoid. Maybe someone still refers to the
	 ; old one. 
	 (new-paper (ly:output-def-clone pap))
	 
	 (new-scope (ly:output-def-scope new-paper)))
    
    (if in-layout?
	(ly:warning (_ "set-global-staff-size: not in toplevel scope")))

    (layout-set-absolute-staff-size-in-module new-scope
					      (* sz (eval 'pt new-scope)))
    (module-define! current-mod '$defaultpaper new-paper)))

(define-public paper-alist

  ;; don't use decimals.
  ;; ISO 216 has a tolerance of +- 2mm

  '(("a10" . (cons (* 26 mm) (* 37 mm)))
    ("a9" . (cons (* 37 mm) (* 52 mm)))
    ("a8" . (cons (* 52 mm) (* 74 mm)))
    ("a7" . (cons (* 74 mm) (* 105 mm)))
    ("a6" . (cons (* 105 mm) (* 148 mm)))
    ("a5" . (cons (* 148 mm) (* 210 mm)))
    ("a4" . (cons (* 210 mm) (* 297 mm)))
    ("a3" . (cons (* 297 mm) (* 420 mm)))
    ("a2" . (cons (* 420 mm) (* 594 mm)))
    ("a1" . (cons (* 594 mm) (* 841 mm)))
    ("a0" . (cons (* 841 mm) (* 1189 mm)))
    ("b10" . (cons (* 31 mm) (* 44 mm)))
    ("b9" . (cons (* 44 mm) (* 62 mm)))
    ("b8" . (cons (* 62 mm) (* 88 mm)))
    ("b7" . (cons (* 88 mm) (* 125 mm)))
    ("b6" . (cons (* 125 mm) (* 176 mm)))
    ("b5" . (cons (* 176 mm) (* 250 mm)))
    ("b4" . (cons (* 250 mm) (* 353 mm)))
    ("b3" . (cons (* 353 mm) (* 500 mm)))
    ("b2" . (cons (* 500 mm) (* 707 mm)))
    ("b1" . (cons (* 707 mm) (* 1000 mm)))
    ("b0" . (cons (* 1000 mm) (* 1414 mm)))
  ;; Below are two extended sizes defined in DIn 476
    ("4a0" . (cons (* 1682 mm) (* 2378 mm)))
    ("2a0" . (cons (* 1189 mm) (* 1682 mm)))
  ;; Below are ISO 269 standard C series
    ("c10" . (cons (* 28 mm) (* 40 mm)))
    ("c9" . (cons (* 40 mm) (* 57 mm)))
    ("c8" . (cons (* 57 mm) (* 81 mm)))
    ("c7" . (cons (* 81 mm) (* 114 mm)))
    ("c6" . (cons (* 114 mm) (* 162 mm)))
    ("c5" . (cons (* 162 mm) (* 229 mm)))
    ("c4" . (cons (* 229 mm) (* 324 mm)))
    ("c3" . (cons (* 324 mm) (* 458 mm)))
    ("c2" . (cons (* 458 mm) (* 648 mm)))
    ("c1" . (cons (* 648 mm) (* 917 mm)))
    ("c0" . (cons (* 917 mm) (* 1297 mm)))
  ;; Below are North American paper sizes
    ("legal" . (cons (* 8.5 in) (* 14.0 in)))
    ("letter" . (cons (* 8.5 in) (* 11.0 in)))
  ;; Ledger (17x11) is a 90 degree rotation of Tabloid
    ("11x17" . (cons (* 11.0 in) (* 17.0 in)))
  ;; government-letter by IEEE Printer Working Group, for children's writing
    ("government-letter" . (cons (* 8 in) (* 10.5 in)))
    ("government-legal" . (cons (* 8.5 in) (* 13.0 in)))
    ("philippine-legal" . (cons (* 8.5 in) (* 13.0 in)))
  ;; ANSI sizes
    ("ansi a" . (cons (* 8.5 in) (* 11.0 in)))
    ("ansi b" . (cons (* 17.0 in) (* 11.0 in)))
    ("ansi c" . (cons (* 17.0 in) (* 22.0 in)))
    ("ansi d" . (cons (* 22.0 in) (* 34.0 in)))
    ("ansi e" . (cons (* 34.0 in) (* 44.0 in)))
    ("engineering f" . (cons (* 28.0 in) (* 40.0 in)))
  ;; G and H are very rare, and the lengths are variable up to 90 inches
  ;; North American Architectural sizes
    ("arch a" . (cons (* 9.0 in) (* 12.0 in)))
    ("arch b" . (cons (* 12.0 in) (* 18.0 in)))
    ("arch c" . (cons (* 18.0 in) (* 24.0 in)))
    ("arch d" . (cons (* 24.0 in) (* 36.0 in)))
    ("arch e" . (cons (* 36.0 in) (* 48.0 in)))
    ("arch e1" . (cons (* 30.0 in) (* 42.0 in)))
  ;; Other sizes
  ;; Some are antique sizes which are still using in UK
    ("statement" . (cons (* 5.5 in) (* 8.5 in)))
    ("half letter" . (cons (* 5.5 in) (* 8.5 in)))
    ("quarto" . (cons (* 8.0 in) (* 10.0 in)))
    ("executive" . (cons (* 7.25 in) (* 10.5 in)))
    ("monarch" . (cons (* 7.25 in) (* 10.5 in)))
    ("foolscap" . (cons (* 8.27 in) (* 13.0 in)))
    ("folio" . (cons (* 8.27 in) (* 13.0 in)))
    ("super-b" . (cons (* 13.0 in) (* 19.0 in)))
    ("post" . (cons (* 15.5 in) (* 19.5 in)))
    ("crown" . (cons (* 15.0 in) (* 20.0 in)))
    ("large post" . (cons (* 16.5 in) (* 21.0 in)))
    ("demy" . (cons (* 17.5 in) (* 22.5 in)))
    ("medium" . (cons (* 18.0 in) (* 23.0 in)))
    ("broadsheet" . (cons (* 18.0 in) (* 24.0 in)))
    ("royal" . (cons (* 20.0 in) (* 25.0 in)))
    ("elephant" . (cons (* 23.0 in) (* 28.0 in)))
    ("double demy" . (cons (* 22.5 in) (* 35.0 in)))
    ("quad demy" . (cons (* 35.0 in) (* 45.0 in)))
    ("royal" . (cons (* 26.0 in) (* 34.0 in)))
    ("imperial" . (cons (* 22.0 in) (* 30.0 in)))
    ("antiquarian" . (cons (* 31.0 in) (* 53.0 in)))
  ;; PA4 based sizes
    ("pa0" . (cons (* 840 mm) (* 1120 mm)))
    ("pa1" . (cons (* 560 mm) (* 840 mm)))
    ("pa2" . (cons (* 420 mm) (* 560 mm)))
    ("pa3" . (cons (* 280 mm) (* 420 mm)))
    ("pa4" . (cons (* 210 mm) (* 280 mm)))
    ("pa5" . (cons (* 140 mm) (* 210 mm)))
    ("pa6" . (cons (* 105 mm) (* 140 mm)))
    ("pa7" . (cons (* 70 mm) (* 105 mm)))
    ("pa8" . (cons (* 52 mm) (* 70 mm)))
    ("pa9" . (cons (* 35 mm) (* 52 mm)))
    ("pa10" . (cons (* 26 mm) (* 35 mm)))
  ;; F4 used in southeast Asia and Australia
    ("f4" . (cons (* 210 mm) (* 330 mm)))
   ))

;; todo: take dimension arguments.

(define (set-paper-dimensions m w h)
  "M is a module (i.e. layout->scope_ )"
  (let* ((mm (eval 'mm m)))
    (module-define! m 'paper-width w)
    (module-define! m 'paper-height h)
    (module-define! m 'line-width (- w
				     (ly:modules-lookup (list m) 'left-margin (* 10 mm))
				     (ly:modules-lookup (list m) 'right-margin (* 10 mm))))

    (module-define! m 'indent (/ w 14))
    (module-define! m 'short-indent (* 5 mm))

    ;; page layout - what to do with (printer specific!) margin settings?

    ))

(define (internal-set-paper-size module name landscape?)
  (define (swap x)
    (cons (cdr x) (car x)))
  
  (let* ((entry (assoc name paper-alist))
	 (is-paper? (module-defined? module 'is-paper))
	 (mm (eval 'mm module)))
    
    (cond
     ((not is-paper?)
      (ly:warning (_ "This is not a \\layout {} object, ~S" module)))
     ((pair? entry)

      (set! entry (eval (cdr entry) module))
      (if landscape?
	  (set! entry (swap entry)))
      (set-paper-dimensions module (car entry) (cdr entry))

      (module-define! module 'papersizename name)
      (module-define! module 'landscape 
		      (if landscape? #t #f)))
     (else
      (ly:warning (_ "Unknown papersize: ~a" name))))))

(define-safe-public (set-default-paper-size name . rest)
  (internal-set-paper-size
   (ly:output-def-scope (eval '$defaultpaper (current-module)))
   name
   (memq 'landscape rest)))

(define-public (set-paper-size name . rest)
  (if (module-defined? (current-module) 'is-paper)
      (internal-set-paper-size (current-module) name
			       (memq 'landscape rest))

      ;;; TODO: should raise (generic) exception with throw, and catch
      ;;; that in parse-scm.cc
      (ly:warning (_ "Must use #(set-paper-size .. ) within \\paper { ... }"))))

(define-public (scale-layout pap scale)
  (let* ((new-pap (ly:output-def-clone pap))
	 (dim-vars (ly:output-def-lookup pap 'dimension-variables))
	 (old-scope (ly:output-def-scope pap))
	 (scope (ly:output-def-scope new-pap)))

    (for-each
     (lambda (v)
       (let* ((var (module-variable old-scope v))
	      (val (if (variable? var) (variable-ref var) #f)))

	 (if (number? val)
	     (module-define! scope v
			     (/ val scale))

	     ;; spurious warnings, eg. for paper-width, paper-height. 
	     ;; (ly:warning (_ "not a number, ~S = ~S " v  val))
	     )))
     
     dim-vars)
    
    new-pap))