Re: a question of co.exe

[yangsaiqing]

How can I keep replies to the mailing so that others can participate in
the discussion and learn from the result?

But I do not find the button "Creat discussion" 
:)
----- Original Message ----- 
From: "Bob Proulx" <address@hidden>
To: "yangsaiqing" <address@hidden>
Cc: <address@hidden>
Sent: Monday, July 23, 2007 5:53 PM
Subject: Re: a question of co.exe


> Please keep replies to the mailing so that others can participate in
> the discussion and learn from the result.
> 
> yangsaiqing wrote:
>> D:\program\cvs2svn>D:\program\Python24\python D:\program\cvs2svn\cvs2svn 
>> --encoding=gb2312 --use-cvs -s F:\svnServer\Dragon10 
>> F:\cvs_Dragon_Server\Dragon
>> ...
>> ERROR: The command '['cvs', '-q', '-R', 'co', '-r1.1', '-p', '-kk', 
>> 'Dragon/Source/2DPage/2DPage.cpp']' failed with exit status: 1
>> and the following output:
>> cvs [checkout aborted]: the :pserver: access method is not installed on this 
>> system
> 
> For cvs2svn help let me suggest the address@hidden mailing
> list.  However that error above seems pretty direct.  Because of the
> --use-cvs option it is trying to use the :pserver: access method of
> CVS.  But generally that should not be needed.
> 
> Are these cvs ,v files or rcs ,v files?
> 
>> D:\program\cvs2svn>D:\program\Python24\python D:\program\cvs2svn\cvs2svn 
>> --encoding=gb2312 -s F:\svnServer\Dragon10 F:\cvs_Dragon_Server\Dragon
>> ...
>> ERROR: The command '['co', '-q', '-x,v', '-p1.1', '-kk', 
>> 'F:\\cvs_Dragon_Server\\Dragon\\Source\\2DPage\\2DPage.cpp,v']' failed with 
>> exit status:1 and the following output:
>> cvs [rcsfilet aborted]: -q or -Q muset be specified before "rcsfile"
> 
> I don't understand that error at all.  It looks like a different
> problem than what you previously reported.
> 
>> So what can I do? :)
> 
> I am really not sure what you can do.  Things seem pretty messed up
> but without any obvious reason.  Plus you are running on an operating
> system that I find particular difficult.  Perhaps someone else on the
> mailing list will have an idea.
> 
> Is this a project that you can post the sources to on the internet?  I
> might take a look at them if they were available.
> 
> Bob
> 
> 
> yangsaiqing wrote:
>> :)
>>     if  I use the command as :
>> 
>> D:\program\cvs2svn>D:\program\Python24\python D:\program\cvs2svn\cvs2svn 
>> --encoding=gb2312 --use-cvs -s F:\svnServer\Dragon10 
>> F:\cvs_Dragon_Server\Dragon
>> 
>> then it will be:
>> 
>> "Creating Subversion r9124 (commit)
>> Creating Subversion r9125 (commit)
>> Creating Subversion r9126 (commit)
>> Creating Subversion r9127 (commit)
>> Creating Subversion r9128 (commit)
>> Done
>> ----- pass 6 -----
>> Sorting symbolic name source revisions...
>> Done
>> ----- pass 7 -----
>> Determining offsets for all symbolic names...
>> Done.
>> ----- pass 8 -----
>> Creating new repository 'F:\svnServer\Dragon10'
>> Starting Subversion Repository.
>> Starting Subversion r1 / 9128
>> Starting Subversion r2 / 9128
>> ERROR: The command '['cvs', '-q', '-R', 'co', '-r1.1', '-p', '-kk', 
>> 'Dragon/Sour
>> ce/2DPage/2DPage.cpp']' failed with exit status: 1
>> and the following output:
>> cvs [checkout aborted]: the :pserver: access method is not installed on this 
>> system
>> "
>> 
>> if  I use the command as :
>> 
>> D:\program\cvs2svn>D:\program\Python24\python D:\program\cvs2svn\cvs2svn 
>> --encoding=gb2312 -s F:\svnServer\Dragon10 F:\cvs_Dragon_Server\Dragon
>> 
>> 
>> then it wiil be :
>> 
>> "Creating Subversion r9124 (commit)
>> Creating Subversion r9125 (commit)
>> Creating Subversion r9126 (commit)
>> Creating Subversion r9127 (commit)
>> Creating Subversion r9128 (commit)
>> Done
>> ----- pass 6 -----
>> Sorting symbolic name source revisions...
>> Done
>> ----- pass 7 -----
>> Determining offsets for all symbolic names...
>> Done.
>> ----- pass 8 -----
>> Creating new repository 'F:\svnServer\Dragon10'
>> Starting Subversion Repository.
>> Starting Subversion r1 / 9128
>> Starting Subversion r2 / 9128
>> ERROR: The command '['co', '-q', '-x,v', '-p1.1', '-kk', 
>> 'F:\\cvs_Dragon_Server\\Dragon\\Source\\2DPage\\2DPage.cpp,v']' failed with 
>> exit status:1 and the following output:
>> cvs [rcsfilet aborted]: -q or -Q muset be specified before "rcsfile"
>> "
>> 
>> So what can I do? :)
>> ----- Original Message ----- 
>> From: "Bob Proulx" <address@hidden>
>> To: "yangsaiqing" <address@hidden>
>> Cc: <address@hidden>
>> Sent: Monday, July 23, 2007 4:21 PM
>> Subject: Re: a question of co.exe
>> 
>> 
>> > yangsaiqing wrote:
>> >>     I want use the soft "cvs2svn" to translate cvs data into svn
>> >> data ,which need use "co.exe",But when I run the command,it
>> >> failed,as the accessories.  What can I do for this?
>> >> help me:)
>> > 
>> > In the future please simply include the text of your problem and not a
>> > jpeg screem capture.  The size of the screen capture is huge and not
>> > as easy to work with as the text of the error.
>> > 
>> > Transcribed:
>> >>  original_size.ico,v:51 unknown character `_'
>> > 
>> > That indicates that the ,v file is corrupted.  On line 51 of that file
>> > an '_' character is unexpected.  The file is now corrupted.
>> > 
>> > Because .ico files are binary files special care needs to taken when
>> > committing changes and some file copy programs need to be told to copy
>> > them in binary mode.
>> > 
>> > I don't know what to suggest at this time.  You may be able to
>> > carefully edit the ,v file with an editor and to correct the problem.
>> > But be sure to keep a backup in case the editing makes the problem
>> > worse.
>> > 
>> > Bob
>>