[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Printing problem with 3.2.4
From: |
murlox |
Subject: |
Re: Printing problem with 3.2.4 |
Date: |
Sat, 22 May 2010 05:46:09 -0700 (PDT) |
I performed a simple fix by changing the following code on print.m:
OLD
if (doprint)
if (isunix ())
prn_opt = "l";
NEW
if (doprint)
if (isunix ())
prn_opt = "";
This allowed me to print again (I'm very glad), but the outcome of the print
was no longer stretched to the sides when adding the option "-landscape". I
kinda missed the capability from old 3.0.3. When I saw the old print.m from
3.0.3, it looked much simpler, yet it worked very well. I guess, my problem
is now partially solved, albeit a little bit unsatisfactory.
Many thanks to Ben Abbott who allowed me to isolate the problem.
Regards,
Al
--
View this message in context:
http://octave.1599824.n4.nabble.com/Printing-problem-with-3-2-4-tp2225908p2227145.html
Sent from the Octave - General mailing list archive at Nabble.com.
- Printing problem with 3.2.4, murlox, 2010/05/21
- Re: Printing problem with 3.2.4, Ben Abbott, 2010/05/21
- Re: Printing problem with 3.2.4, Ben Abbott, 2010/05/21
- Re: Printing problem with 3.2.4, Alvin W, 2010/05/21
- Re: Printing problem with 3.2.4, Ben Abbott, 2010/05/21
- Re: Printing problem with 3.2.4, Alvin W, 2010/05/22
- Re: Printing problem with 3.2.4, Alvin W, 2010/05/22
- Re: Printing problem with 3.2.4,
murlox <=
- Re: Printing problem with 3.2.4, Ben Abbott, 2010/05/22
- Re: Printing problem with 3.2.4, murlox, 2010/05/22