[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Octave 3.0.1 available for ftp
From: |
Michael Goffioul |
Subject: |
Re: Octave 3.0.1 available for ftp |
Date: |
Tue, 22 Apr 2008 09:51:10 +0200 |
On Tue, Apr 22, 2008 at 8:34 AM, Tatsuro MATSUOKA <address@hidden> wrote:
> 3. d:\usr\Tatsu\OctSrc\octave-3.0.1\scripts/general\bitcmp.m PASS 14/15
> FAIL 1
>
> ***** assert(bitcmp(A,Amax),bitor(bitshift(1,Amax-1),bitshift(1,Amax-2)));
> !!!!! test failed
> error: assert (bitcmp (A, Amax),bitor (bitshift (1, Amax - 1), bitshift (1,
> Amax - 2))) expected
> 6.7554e+015
> but got
> 1.1259e+016
> values do not match
> shared variables {
> Amax = 53
> Bmax = 9.0072e+015
> A = 2.2518e+015
> }
> 6.7554e+015
>
> octave:1> 1.1259e+016/6.7554e+015
> ans = 1.6667
> ????
This should have been fixed. Can you check whether HAVE_ROUND is
defined in your config.h?
> 4. test_string.m .......................................... PASS 130/131
> FAIL 1
> >>>>> processing test_string
> ***** test
> charset = setstr (0:127);
>
> result = zeros (1, 128);
>
> result (33:127) = 1;
> if (ispc () && ! isunix ())
> result(10) = 1;
> endif
>
> assert(all (isprint (charset) == result));
> !!!!! test failed
> error: assert (all (isprint (charset) == result)) failed
Can you run the test manually and see where's the difference
between charset and result? What does "ispc() && !isunix()"
return with MinGW?
Michael.
- Octave 3.0.1 available for ftp, John W. Eaton, 2008/04/21
- Re: Octave 3.0.1 available for ftp, Tatsuro MATSUOKA, 2008/04/21
- Re: Octave 3.0.1 available for ftp, Tatsuro MATSUOKA, 2008/04/22
- Re: Octave 3.0.1 available for ftp,
Michael Goffioul <=
- Re: Octave 3.0.1 available for ftp, Tatsuro MATSUOKA, 2008/04/22
- Re: Octave 3.0.1 available for ftp, Michael Goffioul, 2008/04/22
- Re: Octave 3.0.1 available for ftp, Tatsuro MATSUOKA, 2008/04/22
- Re: Octave 3.0.1 available for ftp, Tatsuro MATSUOKA, 2008/04/24
- Re: Octave 3.0.1 available for ftp, Michael Goffioul, 2008/04/24
- Re: Octave 3.0.1 available for ftp, Tatsuro MATSUOKA, 2008/04/24
- Re: Octave 3.0.1 available for ftp, David Bateman, 2008/04/24
- Re: Octave 3.0.1 available for ftp, Tatsuro MATSUOKA, 2008/04/24
- Re: Octave 3.0.1 available for ftp, Michael Goffioul, 2008/04/24
- Re: Octave 3.0.1 available for ftp, John W. Eaton, 2008/04/24