[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Octave on IRIX v4.0.5
From: |
John Eaton |
Subject: |
Re: Octave on IRIX v4.0.5 |
Date: |
Mon, 04 Apr 94 16:06:56 EDT |
address@hidden (Lab Manager) wrote:
: I just built Octave 1.0 on SGI IRIX v4.0.5H. Everything built
: (fairly) easily with the exception of having to cast calls to signal().
: However, in running the tests, I get the following:
:
: Test Run By Manager on Sat Apr 2 22:59:30 PST 1994
: Native configuration
:
: === octave tests ===
:
: Running ./octave.test/fsolve.exp ...
: Running ./octave.test/index.exp ...
: Running ./octave.test/infnan.exp ...
: Running ./octave.test/npsol.exp ...
: FAIL: npsol-1
: FAIL: npsol-4
: Running ./octave.test/transpose.exp ...
These failures are normal. NPSOL is not distributed with Octave
because of license restrictions, but the tests are distributed. I
will see about disabling the npsol tests if NPSOL is not available.
Thanks,
jwe