[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: change in disks behavior between 2.1.18 and 2.1.19
From: |
Mark Burgess |
Subject: |
Re: change in disks behavior between 2.1.18 and 2.1.19 |
Date: |
Fri, 03 Mar 2006 18:56:25 +0100 |
Please upgrade to 2.1.19p1 - this is an unfortunate bug
On Wed, 2006-03-01 at 17:20 -0800, Stephen Fromm wrote:
> I noticed a change in cfengine's behavior when checking the free space
> on partitions.
>
> Here's a basic config I'm testing with:
>
> ---BEGIN---
>
> control:
>
> actionsequence = ( disks )
>
> disks:
>
> /bin freespace=20% define=root_full
> /usr/bin freespace=80% define=usr_full
> /var/lib freespace=80% define=var_full
>
> alerts:
>
> root_full::
> "/ on $(host) is approaching full"
>
> usr_full::
> "/usr on $(host) is approaching full"
>
> var_full::
> "/var on $(host) is approaching full"
>
> ---END---
>
> When run with cfengine-2.1.18, I get the warnings (as expected) for /usr
> and /var. When run on cfengine-2.1.19, I get the following:
>
> ---BEGIN---
>
> *********************************************************************
> Main Tree Sched: disks pass 1 @ Wed Mar 1 17:14:33 2006
> *********************************************************************
>
> cfengine:limbo: Couldn't stat disks checking diskspace
> cfengine:limbo: Free space above -20, defining
> didn't find any file to match the required filesystem /bin
> cfengine:limbo: Couldn't stat disks checking diskspace
> cfengine:limbo: Free space above -80, defining
> didn't find any file to match the required filesystem /usr/bin
> cfengine:limbo: Couldn't stat disks checking diskspace
> cfengine:limbo: Free space above -80, defining
> didn't find any file to match the required filesystem /var/lib
> cfengine:limbo: MESSAGE at Wed Mar 1 17:14:33 2006
>
>
> cfengine:limbo: There are 3 required file(system)s missing on host <global>
> cfengine:limbo: even after all mounts have been attempted.
> cfengine:limbo: This may be caused by a failure to mount a network filesystem
> (check exports)
> cfengine:limbo: or because no valid server was specified in the program
> cf.test
>
> ---END---
>
> Please let me know if additional debug output is needed.
>
> .sf
>
>
>
> _______________________________________________
> Help-cfengine mailing list
> Help-cfengine@gnu.org
> http://lists.gnu.org/mailman/listinfo/help-cfengine