Re: [Health] Fw: GnuHealth installation help

[Luis Falcon]

Dear Mona
On 09/26/2013 05:23 AM, mona gc wrote:
> i did this also,
> It may be a  permission problem. Try to change the permisson of the
> file  /usr/lib/python2.7/dist-packages/pytz/reference.pyc'  to 644(
> 777 not recommended  , if 644 not worked out you try with 777) and try
> to install.
> 
Is finding an old system-wide version of pytz on your system and is
trying to remove it with your gnuhealth user, that has no permission.

You probably installed the pytz package with apt-get

Try to remove it, as root (apt-get remove python-tz) and then re-run the
installation script.

Best,
> Did not work
> regards
> 
> ----- Forwarded Message -----
> *From:* KK CHN <address@hidden>
> *To:* mona gc <address@hidden>; General discussion and help
> <address@hidden>
> *Sent:* Thursday, 26 September 2013 2:55 AM
> *Subject:* Re: [Health] GnuHealth installation help
> 
> On 9/26/13, mona gc <address@hidden
> <mailto:address@hidden>> wrote:
>>
>> Dear Members, kindly help me to install GnuHealth on Ubuntu 12.04
>>
>> Well, my installation goes fine. Kindly
>> see the log of my installation at the bottom of this mail. But I struggle
>> here,
>> Setting
>> Up your Server Timezone
>> Find the server configuration file trytond.conf:
>> cd $HOME/gnuhealth/tryton/server/trytond-<YOUR_VERSION_NUMBER>/etc
>> While running above command as follows,
>> address@hidden
> <mailto:address@hidden>:~/gnuhealth-2.2.0$ cd
>> $HOME/gnuhealth/tryton/server/trytond-2.2.0/etc
>> I get this error,
>> -su: cd: /home/gnuhealth/gnuhealth/tryton/server/trytond-2.2.0/etc: No
> such
>> file or directory
>> Kindly help me if anything goes wrong.
>> Regards,
>> Mohana
>>
>> Log of my installation
>>
>>
>> address@hidden <mailto:address@hidden>:~$ sudo -s
>> [sudo] password for mohan:
>> address@hidden <mailto:address@hidden>:~#
> adduser gnuhealth
>> Adding user `gnuhealth' ...
>> Adding new group `gnuhealth' (1001) ...
>> Adding new user `gnuhealth' (1001) with group `gnuhealth' ...
>> Creating home directory `/home/gnuhealth' ...
>> Copying files from `/etc/skel' ...
>> Enter new UNIX password:
>> Retype new UNIX password:
>> passwd: password updated successfully
>> Changing the user information for gnuhealth
>> Enter the new value, or press ENTER for the default
>>    Full Name []:
>>    Room Number []:
>>    Work Phone []:
>>    Home Phone []:
>>    Other []:
>> Is the information correct? [Y/n] y
>> address@hidden <mailto:address@hidden>:~# su -
> postgres -c "createuser --createdb
>> --no-createrole --no-superuser gnuhealth"
>> address@hidden <mailto:address@hidden>:~# su -
> postgres -c "createuser --createdb
>> --no-createrole --no-superuser gnuhealth"
>> createuser: creation of new role failed: ERROR:  role "gnuhealth" already
>> exists
>> address@hidden <mailto:address@hidden>:~# su -
> gnuhealth
>> address@hidden
> <mailto:address@hidden>:~$ wget
>> http://ftp.gnu.org/gnu/health/gnuhealth-latest.tar.gz
>> --2013-09-26 00:07:54--
>> http://ftp.gnu.org/gnu/health/gnuhealth-latest.tar.gz
>> Resolving ftp.gnu.org (ftp.gnu.org)... 208.118.235.20, 2001:4830:134:3::b
>> Connecting to ftp.gnu.org (ftp.gnu.org)|208.118.235.20|:80... connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: 3580147 (3.4M) [application/x-gzip]
>> Saving to: `gnuhealth-latest.tar.gz'
>>
>> 100%[======================================>] 3,580,147  61.8K/s  in
>> 62s
>>
>> 2013-09-26 00:08:57 (56.3 KB/s) - `gnuhealth-latest.tar.gz' saved
>> [3580147/3580147]
>>
>> address@hidden
> <mailto:address@hidden>:~$ tar xzf gnuhealth-latest.tar.gz
>> address@hidden
> <mailto:address@hidden>:~$ ls
>> examples.desktop  gnuhealth-2.2.0  gnuhealth-latest.tar.gz
>> address@hidden
> <mailto:address@hidden>:~$ cd gnuhealth-*
>> address@hidden
> <mailto:address@hidden>:~/gnuhealth-2.2.0$
> ./gnuhealth_install.sh
>>
>> [00:09:50][INFO] Starting GNU Health 2.2.0 installation...
>>
>> [00:09:50][INFO] CHECKING REQUIREMENTS
>>
>> [00:09:50]Looking for wget....
>> wget is /usr/bin/wget
>>
>> [00:09:50]Looking for the Python Interpreter command...
>> python is /usr/bin/python
>>
>> [00:09:50][INFO] Found Python 2.7.3
>>
>> [00:09:50]-> Looking for PIP command...
>> [00:09:50][INFO] OK.
>>
>> [00:09:50][INFO] Creating temporary directory...
>> [00:09:50][INFO] OK.
>>
>> [00:09:50][INFO] Creating destination directories...
>> [00:09:50][INFO] OK.
>>
>> [00:09:50][INFO] Getting list of lastest Tryton packages...
>> [00:10:29][INFO] OK.
>>
>> [00:10:29][INFO] Installing python dependencies with pip...
>> Requirement already satisfied (use --upgrade to upgrade): lxml in
>> /usr/lib/python2.7/dist-packages
>> Cleaning up...
>> Requirement already satisfied (use --upgrade to upgrade): relatorio in
>> /usr/lib/python2.7/dist-packages
>> Requirement already satisfied (use --upgrade to upgrade): Genshi>=0.5 in
>> /usr/lib/python2.7/dist-packages (from relatorio)
>> Requirement already satisfied (use --upgrade to upgrade): lxml>=2.0 in
>> /usr/lib/python2.7/dist-packages (from relatorio)
>> Cleaning up...
>> Requirement already satisfied (use --upgrade to upgrade):
> python-dateutil in
>> /usr/lib/python2.7/dist-packages
>> Cleaning up...
>> Requirement already satisfied (use --upgrade to upgrade): psycopg2 in
>> /usr/lib/python2.7/dist-packages
>> Cleaning up...
>> Downloading/unpacking pytz>=2013b
>>  Downloading pytz-2013d.tar.bz2 (204Kb): 204Kb downloaded
>>  Running setup.py egg_info for package pytz
>>
>>    warning: no files found matching '*.pot' under directory 'pytz'
>>    warning: no previously-included files found matching 'test_zdump.py'
>> Installing collected packages: pytz
>>  Found existing installation: pytz 2011k
>>    Uninstalling pytz:
>> Exception:
>> Traceback (most recent call last):
>>  File "/usr/lib/python2.7/dist-packages/pip/basecommand.py", line 126, in
>> main
>>    self.run(options, args)
>>  File "/usr/lib/python2.7/dist-packages/pip/commands/install.py", line
> 228,
>> in run
>>    requirement_set.install(install_options, global_options)
>>  File "/usr/lib/python2.7/dist-packages/pip/req.py", line 1089, in install
>>    requirement.uninstall(auto_confirm=True)
>>  File "/usr/lib/python2.7/dist-packages/pip/req.py", line 476, in
> uninstall
>>    paths_to_remove.remove(auto_confirm)
>>  File "/usr/lib/python2.7/dist-packages/pip/req.py", line 1391, in remove
>>    renames(path, new_path)
>>  File "/usr/lib/python2.7/dist-packages/pip/util.py", line 248, in renames
>>    shutil.move(old, new)
>>  File "/usr/lib/python2.7/shutil.py", line 297, in move
>>    rmtree(src)
>>  File "/usr/lib/python2.7/shutil.py", line 250, in rmtree
>>    onerror(os.remove, fullname, sys.exc_info())
>>  File "/usr/lib/python2.7/shutil.py", line 248, in rmtree
>>    os.remove(fullname)
>> OSError: [Errno 13] Permission denied:
>> '/usr/lib/python2.7/dist-packages/pytz/reference.pyc'
> 
> It may be a  permission problem. Try to change the permisson of the
> file  /usr/lib/python2.7/dist-packages/pytz/reference.pyc'  to 644(
> 777 not recommended  , if 644 not worked out you try with 777) and try
> to install.
> 
> 
>> Storing complete log in /home/gnuhealth/.pip/pip.log
>> address@hidden
> <mailto:address@hidden>:~/gnuhealth-2.2.0$
>> address@hidden
> <mailto:address@hidden>:~/gnuhealth-2.2.0$ cd
>> $HOME/gnuhealth/tryton/server/trytond-2.2.0/etc
>> -su: cd: /home/gnuhealth/gnuhealth/tryton/server/trytond-2.2.0/etc: No
> such
>> file or directory
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Wed, 25 Sep 2013 19:36:40 +0800 (SGT)
>> From: mona gc <address@hidden
> <mailto:address@hidden>>
>> To: Luis Falcon <address@hidden <mailto:address@hidden>>
>> Cc: "address@hidden <mailto:address@hidden>" <address@hidden
> <mailto:address@hidden>>
>> Subject: Re: [Health] [sr #108396] GNU Health installation Healp
>>    needed
>> Message-ID:
>>    <address@hidden
> <mailto:address@hidden>>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> Thanks dear Luis,
>> For your kind guidance. Since last 10 days i am spending 8-9 hrs
> everyday on
>> this yet not getting any result.
>> I will be obliged if, you (community) systematically and step by step
> guide
>> me in this installation. In lieu of this i may offer my volunteer
> service to
>> GNU Health project developing some graphics.
>>
>> Assistance required for: installation of GNU Health on Ubuntu 12.04
>>
>> regards
>> Mohana
>>
>>
> 
> KK
> 
>