address@hidden ~/src/guix$ ./pre-inst-env make check-system TESTS=rsync-with-default-port Compiling Scheme modules... ;;; note: source file /home/natsu/src/guix/gnu/tests/rsync.scm ;;; newer than compiled /home/natsu/.cache/guile/ccache/2.2-LE-8-3.A/home/natsu/src/guix/gnu/tests/rsync.scm.go Running 1 system tests... substitute: updating list of substitutes from 'https://mirror.hydra.gnu.org'... 100.0% The following derivations will be built: /gnu/store/ar4jg2ncjpy6qpbgkyp0ssyhr2vdv479-rsync-test.drv /gnu/store/g3ziw8v8bbsx9wxr1jkcf5pvm9i3hpl3-run-vm.sh.drv @ build-started /gnu/store/g3ziw8v8bbsx9wxr1jkcf5pvm9i3hpl3-run-vm.sh.drv - x86_64-linux /var/log/guix/drvs/g3//ziw8v8bbsx9wxr1jkcf5pvm9i3hpl3-run-vm.sh.drv.bz2 @ build-succeeded /gnu/store/g3ziw8v8bbsx9wxr1jkcf5pvm9i3hpl3-run-vm.sh.drv - @ build-started /gnu/store/ar4jg2ncjpy6qpbgkyp0ssyhr2vdv479-rsync-test.drv - x86_64-linux /var/log/guix/drvs/ar//4jg2ncjpy6qpbgkyp0ssyhr2vdv479-rsync-test.drv.bz2 Warning: vlan 0 is not connected to host network [ 0.000000] Linux version 4.12.5-gnu (nixbld@) (gcc version 5.4.0 (GCC) ) #1 SMP 1 [ 0.000000] Command line: console=ttyS0 --root=/dev/vda1 --system=/gnu/store/svj3fgi0rmyfpmvm603r26aa7va04iyw-system --load=/gnu/store/svj3fgi0rmyfpmvm603r26aa7va04iyw-system/boot [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffddfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffde000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: last_pfn = 0xffde max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] found SMP MP-table at [mem 0x000f6a90-0x000f6a9f] mapped at [ffff8e86800f6a90] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x0f94d000-0x0ffcffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F68A0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000000FFE154E 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000000FFE142A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000000FFE0040 0013EA (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000000FFE0000 000040 [ 0.000000] ACPI: APIC 0x000000000FFE149E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000000FFE1516 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000000ffddfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x0ffda000-0x0ffddfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:ffd6001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 143713184 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000001000-0x000000000ffddfff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000ffddfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffddfff] [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff8e868f600000 s118936 r8192 d32616 u2097152 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr f60d980 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64359 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=ttyS0 --root=/dev/vda1 --system=/gnu/store/svj3fgi0rmyfpmvm603r26aa7va04iyw-system --load=/gnu/store/svj3fgi0rmyfpmvm603r26aa7va04iyw-system/boot [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Memory: 231720K/261616K available (8776K kernel code, 1480K rwdata, 3640K rodata, 1700K init, 1156K bss, 29896K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 35796 entries in 140 pages [ 0.004000] Hierarchical RCU implementation. [ 0.004000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.004000] NR_IRQS:16640 nr_irqs:256 16 [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [ttyS0] enabled [ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.004006] tsc: Detected 3392.294 MHz processor [ 0.004364] Calibrating delay loop (skipped) preset value.. 6784.58 BogoMIPS (lpj=13569176) [ 0.004586] pid_max: default: 32768 minimum: 301 [ 0.004927] ACPI: Core revision 20170303 [ 0.005701] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.006167] Security Framework initialized [ 0.006456] Yama: becoming mindful. [ 0.006722] AppArmor: AppArmor initialized [ 0.007040] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.007614] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008134] Mount-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.008612] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.009249] CPU: Physical Processor ID: 0 [ 0.009557] mce: CPU supports 10 MCE banks [ 0.009900] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.010286] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.016132] Freeing SMP alternatives memory: 32K [ 0.017354] smpboot: Max logical packages: 1 [ 0.017774] x2apic enabled [ 0.018104] Switched APIC routing to physical x2apic. [ 0.019021] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) [ 0.020000] Performance Events: PMU not available due to virtualization, using software events only. [ 0.020000] smp: Bringing up secondary CPUs ... [ 0.020000] smp: Brought up 1 node, 1 CPU [ 0.020000] smpboot: Total of 1 processors activated (6784.58 BogoMIPS) [ 0.020000] sched_clock: Marking stable (16000000, 0)->(82742337, -66742337) [ 0.128115] devtmpfs: initialized [ 0.128448] x86/mm: Memory block size: 128MB [ 0.130036] evm: security.selinux [ 0.130305] evm: security.SMACK64 [ 0.130571] evm: security.SMACK64EXEC [ 0.130864] evm: security.SMACK64TRANSMUTE [ 0.131186] evm: security.SMACK64MMAP [ 0.131479] evm: security.ima [ 0.131732] evm: security.capability [ 0.132087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.132860] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.133377] pinctrl core: initialized pinctrl subsystem [ 0.133907] RTC time: 18:48:09, date: 08/10/17 [ 0.134338] NET: Registered protocol family 16 [ 0.134804] cpuidle: using governor ladder [ 0.135139] cpuidle: using governor menu [ 0.135458] PCCT header not found. [ 0.135761] ACPI: bus type PCI registered [ 0.136095] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.136680] PCI: Using configuration type 1 for base access [ 0.137772] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.138392] ACPI: Added _OSI(Module Device) [ 0.138734] ACPI: Added _OSI(Processor Device) [ 0.139098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.139482] ACPI: Added _OSI(Processor Aggregator Device) [ 0.141017] ACPI: Interpreter enabled [ 0.141338] ACPI: (supports S0 S3 S4 S5) [ 0.141659] ACPI: Using IOAPIC for interrupt routing [ 0.142074] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.144559] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.145086] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.145630] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.146197] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.147320] acpiphp: Slot [3] registered [ 0.147671] acpiphp: Slot [4] registered [ 0.148030] acpiphp: Slot [5] registered [ 0.148379] acpiphp: Slot [6] registered [ 0.148717] acpiphp: Slot [7] registered [ 0.149051] acpiphp: Slot [8] registered [ 0.149388] acpiphp: Slot [9] registered [ 0.149725] acpiphp: Slot [10] registered [ 0.150063] acpiphp: Slot [11] registered [ 0.150401] acpiphp: Slot [12] registered [ 0.150860] acpiphp: Slot [13] registered [ 0.151187] acpiphp: Slot [14] registered [ 0.151503] acpiphp: Slot [15] registered [ 0.151833] acpiphp: Slot [16] registered [ 0.152176] acpiphp: Slot [17] registered [ 0.152522] acpiphp: Slot [18] registered [ 0.152866] acpiphp: Slot [19] registered [ 0.153210] acpiphp: Slot [20] registered [ 0.153553] acpiphp: Slot [21] registered [ 0.153891] acpiphp: Slot [22] registered [ 0.154235] acpiphp: Slot [23] registered [ 0.154579] acpiphp: Slot [24] registered [ 0.154920] acpiphp: Slot [25] registered [ 0.155265] acpiphp: Slot [26] registered [ 0.155618] acpiphp: Slot [27] registered [ 0.155962] acpiphp: Slot [28] registered [ 0.156310] acpiphp: Slot [29] registered [ 0.156651] acpiphp: Slot [30] registered [ 0.156990] acpiphp: Slot [31] registered [ 0.157318] PCI host bridge to bus 0000:00 [ 0.157683] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.158263] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.158797] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.159364] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window] [ 0.159954] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.165809] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.166402] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.166934] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.167505] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.168456] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.169056] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.231360] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.231935] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.232412] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.232926] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.233363] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.233807] ACPI: Enabled 2 GPEs in block 00 to 0F [ 0.234253] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.234675] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.235355] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.235820] vgaarb: loaded [ 0.236180] SCSI subsystem initialized [ 0.236548] ACPI: bus type USB registered [ 0.236910] usbcore: registered new interface driver usbfs [ 0.237358] usbcore: registered new interface driver hub [ 0.237792] usbcore: registered new device driver usb [ 0.238653] EDAC MC: Ver: 3.0.0 [ 0.239076] PCI: Using ACPI for IRQ routing [ 0.239606] NetLabel: Initializing [ 0.239904] NetLabel: domain hash size = 128 [ 0.240261] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.240730] NetLabel: unlabeled traffic allowed by default [ 0.241248] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.241818] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.242211] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.245765] clocksource: Switched to clocksource kvm-clock [ 0.252191] VFS: Disk quotas dquot_6.6.0 [ 0.252592] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.253194] AppArmor: AppArmor Filesystem Enabled [ 0.253619] pnp: PnP ACPI init [ 0.254218] pnp: PnP ACPI: found 6 devices [ 0.259835] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.260621] NET: Registered protocol family 2 [ 0.261097] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.261674] TCP bind hash table entries: 2048 (order: 3, 32768 bytes) [ 0.262199] TCP: Hash tables configured (established 2048 bind 2048) [ 0.262723] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.263191] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.263716] NET: Registered protocol family 1 [ 0.264076] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.264562] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.265030] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.265547] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.266287] Trying to unpack rootfs image as initramfs... [ 0.343130] Freeing initrd memory: 6668K [ 0.343660] Scanning for low memory corruption every 60 seconds [ 0.344250] audit: initializing netlink subsys (disabled) [ 0.344834] Initialise system trusted keyrings [ 0.345163] audit: type=2000 audit(1502390890.343:1): state=initialized audit_enabled=0 res=1 [ 0.345747] workingset: timestamp_bits=40 max_order=16 bucket_order=0 [ 0.346780] zbud: loaded [ 0.347367] Allocating IMA blacklist keyring. [ 0.348290] Key type asymmetric registered [ 0.348632] Asymmetric key parser 'x509' registered [ 0.349031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.349634] io scheduler noop registered [ 0.349970] io scheduler deadline registered (default) [ 0.350403] io scheduler cfq registered [ 0.350834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.351433] ACPI: Power Button [PWRF] [ 0.351816] GHES: HEST is not enabled! [ 0.352166] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.374690] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.376309] Linux agpgart interface v0.103 [ 0.377980] brd: module loaded [ 0.378971] loop: module loaded [ 0.379967] scsi host0: ata_piix [ 0.380289] scsi host1: ata_piix [ 0.380572] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14 [ 0.381115] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15 [ 0.381902] libphy: Fixed MDIO Bus: probed [ 0.382249] tun: Universal TUN/TAP device driver, 1.6 [ 0.382679] PPP generic driver version 2.4.2 [ 0.383053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.383598] ehci-pci: EHCI PCI platform driver [ 0.383967] ehci-platform: EHCI generic platform driver [ 0.384394] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.384890] ohci-pci: OHCI PCI platform driver [ 0.385250] ohci-platform: OHCI generic platform driver [ 0.385669] uhci_hcd: USB Universal Host Controller Interface driver [ 0.386380] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.387505] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.387927] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.388397] mousedev: PS/2 mouse device common for all mice [ 0.389029] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.389988] rtc_cmos 00:00: RTC can wake from S4 [ 0.390538] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.391129] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 0.391770] i2c /dev entries driver [ 0.392086] device-mapper: uevent: version 1.0.3 [ 0.392492] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: address@hidden [ 0.393172] ledtrig-cpu: registered to indicate activity on CPUs [ 0.393836] NET: Registered protocol family 10 [ 0.394344] Segment Routing with IPv6 [ 0.394668] NET: Registered protocol family 17 [ 0.395036] Key type dns_resolver registered [ 0.395508] registered taskstats version 1 [ 0.395861] Loading compiled-in X.509 certificates [ 0.396255] zswap: loaded using pool lzo/zbud [ 0.402869] Key type big_key registered [ 0.403268] Key type trusted registered [ 0.403640] Key type encrypted registered [ 0.403965] AppArmor: AppArmor sha1 policy hashing enabled [ 0.404406] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.404917] evm: HMAC attrs: 0x1 [ 0.405437] Magic number: 13:460:847 [ 0.405842] rtc_cmos 00:00: setting system clock to 2017-08-10 18:48:09 UTC (1502390889) [ 0.406448] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.406936] EDD information not available. [ 0.546280] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.547090] ata2.00: configured for MWDMA2 [ 0.547831] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.558164] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.558745] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.559447] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 0.561173] Freeing unused kernel memory: 1700K [ 0.561551] Write protecting the kernel read-only data: 14336k [ 0.562258] Freeing unused kernel memory: 1448K [ 0.563303] Freeing unused kernel memory: 456K GC Warning: pthread_getattr_np or pthread_attr_getstack failed for main thread GC Warning: Couldn't read /proc/stat Welcome, this is GNU's early boot Guile. Use '--repl' for an initrd REPL. loading kernel modules... [ 0.626234] usbcore: registered new interface driver usb-storage [ 0.628263] usbcore: registered new interface driver uas [ 0.629764] hidraw: raw HID events driver (C) Jiri Kosina [ 0.630583] usbcore: registered new interface driver usbhid [ 0.631049] usbhid: USB HID core driver [ 0.644149] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 0.659900] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.675680] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [ 0.691283] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.706923] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.710710] vda: vda1 vda2 [ 0.724702] FS-Cache: Loaded [ 0.726747] 9pnet: Installing 9P2000 support [ 0.727507] 9p: Installing v9fs 9p2000 file system support [ 0.728013] FS-Cache: Netfs '9p' registered for caching [ 0.731348] fuse init (API version 7.26) [ 0.734631] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) loading '/gnu/store/svj3fgi0rmyfpmvm603r26aa7va04iyw-system/boot'... mak[ 0.761608] random: fast init done ing '/gnu/store/svj3fgi0rmyfpmvm603r26aa7va04iyw-system' the current system... setting up setuid programs in '/run/setuid-programs'... populating /etc from /gnu/store/wy25fv5rqxq7d2gijny7hyj9njalnjj8-etc... adding user 'root'... adding group 'root'... adding group 'wheel'... adding group 'users'... adding group 'nogroup'... adding group 'tty'... adding group 'dialout'... adding group 'kmem'... adding group 'input'... adding group 'video'... adding group 'audio'... adding group 'netdev'... adding group 'lp'... adding group 'disk'... [ 1.326666] random: crng init done adding group 'floppy'... [ 1.357808] tsc: Refined TSC clocksource calibration: 3392.239 MHz [ 1.358342] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5aacbefe, max_idle_ns: 440795229191 ns adding group 'cdrom'... adding group 'tape'... adding group 'kvm'... adding group 'guixbuild'... adding group 'rsyncd'... usermod: no changes adding user 'alice'... adding user 'nobody'... adding user 'guixbuilder01'... adding user 'guixbuilder02'... adding user 'guixbuilder03'... adding user 'guixbuilder04'... adding user 'guixbuilder05'... adding user 'guixbuilder06'... adding user 'guixbuilder07'... adding user 'guixbuilder08'... adding user 'guixbuilder09'... adding user 'guixbuilder10'... adding user 'rsyncd'... registering public key '/gnu/store/br4692l4qzbs4qi7b05gm5q41dgv5rvl-guix-0.13.0-5.228a398/share/guix/hydra.gnu.org.pub'... Service root has been started. starting services... Service root-file-system has been started. Service user-file-systems has been started. Service file-system-/dev/pts has been started. Service file-system-/dev/shm has been started. Service file-system-/sys/fs/cgroup has been started. Service file-system-/sys/fs/cgroup/cpuset has been started. Service file-system-/sys/fs/cgroup/cpu has been started. Service file-system-/sys/fs/cgroup/cpuacct has been started. Service file-system-/sys/fs/cgroup/memory has been started. Service file-system-/sys/fs/cgroup/devices has been started. Service file-system-/sys/fs/cgroup/freezer has been started. Service file-system-/sys/fs/cgroup/blkio has been started. Service file-system-/sys/fs/cgroup/perf_event has been started. Service file-system-/sys/fs/cgroup/hugetlb has been started. Service file-systems has been started. Service user-processes has been started. Service host-name has been started. Service user-homes could not be started. waiting for udevd... [ 4.000131] udevd[294]: starting version 3.2.1 [ 4.051142] udevd[294]: starting eudev-3.2.1 [ 4.488341] udevd[294]: no sender credentials received, message ignored [ 4.523932] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 [ 4.527477] parport_pc 00:04: reported by Plug and Play ACPI [ 4.528042] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.534261] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 4.544893] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 [ 4.545741] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4 [ 4.547016] Floppy drive(s): fd0 is 2.88M AMI BIOS [ 4.562181] Error: Driver 'pcspkr' is already registered, aborting... [ 4.566098] FDC 0 is a S82078B [ 4.709484] ppdev: user-space parallel port driver Service udev has been started. nscd: 318 monitoring file `/etc/hosts` (1) nscd: 318 monitoring directory `/etc` (2) nscd: 318 monitoring file `/etc/resolv.conf` (3) nscd: 318 monitoring directory `/etc` (2) nscd: 318 monitoring file `/etc/services` (4) nscd: 318 monitoring directory `/etc` (2) Service nscd has been started. Service guix-daemon has been started. Service urandom-seed has been started. Service syslogd has been started. Service loopback has been started. Service term-tty6 has been started. Service term-tty5 has been started. Service term-tty4 has been started. Service term-tty3 has been started. Service term-tty2 has been started. Service term-tty1 has been started. unicode_start skipped on not a tty Service console-font-tty1 has been started. Service console-font-tty2 has been started. Service console-font-tty3 has been started. Service console-font-tty4 has been started. Service console-font-tty5 has been started. Service console-font-tty6 has been started. Service rsync has been started. Service networking has been started. Service marionette has been started. rsync: mkstemp ".input.iQIqwT" (in files) failed: Permission denied (13) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1178) [sender=3.1.2] rsync: link_stat "input" (in files) failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1650) [Receiver=3.1.2] ice-9/eval.scm:387:11: In procedure eval: ice-9/eval.scm:387:11: In procedure open-file: No such file or directory: "/tmp/output" QEMU runs as PID 5 connected to QEMU's monitor read QEMU monitor prompt connected to guest REPL %%%% Starting test rsync (Writing full log to "rsync.log") marionette is ready /gnu/store/ibw6gxsixknaiwy0i10m4yhi7snshm11-rsync-test-builder:1: FAIL Test file copied to share /gnu/store/ibw6gxsixknaiwy0i10m4yhi7snshm11-rsync-test-builder:1: FAIL Test file correctly received from share # of expected passes 2 # of unexpected failures 2 note: keeping build directory `/tmp/guix-build-rsync-test.drv-0' builder for `/gnu/store/ar4jg2ncjpy6qpbgkyp0ssyhr2vdv479-rsync-test.drv' failed with exit code 1 @ build-failed /gnu/store/ar4jg2ncjpy6qpbgkyp0ssyhr2vdv479-rsync-test.drv - 1 builder for `/gnu/store/ar4jg2ncjpy6qpbgkyp0ssyhr2vdv479-rsync-test.drv' failed with exit code 1 TOTAL: 1 FAIL: /gnu/store/ar2n5rpwpfxj9lbjl0zyxm2wjb1q3l2l-rsync-test make: *** [Makefile:5218: check-system] Error 1 address@hidden ~/src/guix$ ./pre-inst-env make check-system TESTS=rsync-with-port-2000 Compiling Scheme modules... ;;; note: source file /home/natsu/src/guix/gnu/tests/rsync.scm ;;; newer than compiled /home/natsu/.cache/guile/ccache/2.2-LE-8-3.A/home/natsu/src/guix/gnu/tests/rsync.scm.go Running 1 system tests... substitute: updating list of substitutes from 'https://mirror.hydra.gnu.org'... 100.0% The following derivations will be built: /gnu/store/9cwg1i8czpcpiqq9b28kmz6vrmrgf437-rsync-test.drv /gnu/store/aw0lwac9k152r33y5ilvy07ci7icwyhz-rsync.conf.drv /gnu/store/hv77j9ra3g8vknk1izr8i5sihrgivif7-shepherd-rsync.scm.drv /gnu/store/zq2likac6mix3br8adw9j6gz21i1l8n1-shepherd.conf.drv /gnu/store/wxx6gwljarl2nl1mxvv7p1i343pi03jv-boot.drv /gnu/store/qq98dl2bf37n2b0z1by6bxrrlkhgfkyz-grub.cfg.drv /gnu/store/2gbxd3dk7vh56f59gfkxx9ld9wwydqvi-builder-in-linux-vm.drv /gnu/store/wd58d2sjz4qrxld1crksb9sbb84rr1n5-linux-vm-loader.drv /gnu/store/b7q3n5cv9jm84rr5nfj6x726m34z929z-qemu-image.drv /gnu/store/yyb1mlk3irimzhfcp7nzxi3mc1p24ilq-system.drv /gnu/store/0h6dy5lsa0qq640sy24ysvbnd62i0gk0-run-vm.sh.drv @ build-started /gnu/store/aw0lwac9k152r33y5ilvy07ci7icwyhz-rsync.conf.drv - x86_64-linux /var/log/guix/drvs/aw//0lwac9k152r33y5ilvy07ci7icwyhz-rsync.conf.drv.bz2 @ build-succeeded /gnu/store/aw0lwac9k152r33y5ilvy07ci7icwyhz-rsync.conf.drv - @ build-started /gnu/store/hv77j9ra3g8vknk1izr8i5sihrgivif7-shepherd-rsync.scm.drv - x86_64-linux /var/log/guix/drvs/hv//77j9ra3g8vknk1izr8i5sihrgivif7-shepherd-rsync.scm.drv.bz2 @ build-succeeded /gnu/store/hv77j9ra3g8vknk1izr8i5sihrgivif7-shepherd-rsync.scm.drv - @ build-started /gnu/store/zq2likac6mix3br8adw9j6gz21i1l8n1-shepherd.conf.drv - x86_64-linux /var/log/guix/drvs/zq//2likac6mix3br8adw9j6gz21i1l8n1-shepherd.conf.drv.bz2 @ build-succeeded /gnu/store/zq2likac6mix3br8adw9j6gz21i1l8n1-shepherd.conf.drv - @ build-started /gnu/store/wxx6gwljarl2nl1mxvv7p1i343pi03jv-boot.drv - x86_64-linux /var/log/guix/drvs/wx//x6gwljarl2nl1mxvv7p1i343pi03jv-boot.drv.bz2 @ build-succeeded /gnu/store/wxx6gwljarl2nl1mxvv7p1i343pi03jv-boot.drv - @ build-started /gnu/store/yyb1mlk3irimzhfcp7nzxi3mc1p24ilq-system.drv - x86_64-linux /var/log/guix/drvs/yy//b1mlk3irimzhfcp7nzxi3mc1p24ilq-system.drv.bz2 @ build-succeeded /gnu/store/yyb1mlk3irimzhfcp7nzxi3mc1p24ilq-system.drv - @ build-started /gnu/store/qq98dl2bf37n2b0z1by6bxrrlkhgfkyz-grub.cfg.drv - x86_64-linux /var/log/guix/drvs/qq//98dl2bf37n2b0z1by6bxrrlkhgfkyz-grub.cfg.drv.bz2 @ build-succeeded /gnu/store/qq98dl2bf37n2b0z1by6bxrrlkhgfkyz-grub.cfg.drv - @ build-started /gnu/store/2gbxd3dk7vh56f59gfkxx9ld9wwydqvi-builder-in-linux-vm.drv - x86_64-linux /var/log/guix/drvs/2g//bxd3dk7vh56f59gfkxx9ld9wwydqvi-builder-in-linux-vm.drv.bz2 @ build-succeeded /gnu/store/2gbxd3dk7vh56f59gfkxx9ld9wwydqvi-builder-in-linux-vm.drv - @ build-started /gnu/store/wd58d2sjz4qrxld1crksb9sbb84rr1n5-linux-vm-loader.drv - x86_64-linux /var/log/guix/drvs/wd//58d2sjz4qrxld1crksb9sbb84rr1n5-linux-vm-loader.drv.bz2 @ build-succeeded /gnu/store/wd58d2sjz4qrxld1crksb9sbb84rr1n5-linux-vm-loader.drv - @ build-started /gnu/store/b7q3n5cv9jm84rr5nfj6x726m34z929z-qemu-image.drv - x86_64-linux /var/log/guix/drvs/b7//q3n5cv9jm84rr5nfj6x726m34z929z-qemu-image.drv.bz2 environment variable `PATH' set to `/gnu/store/k9hgvkklhzg09x0g2g96f8s971311jca-qemu-minimal-2.9.0/bin:/gnu/store/lvx0kpa1jdbq2b4wkk1gbyiw6zrhigqz-coreutils-8.26/bin' creating qcow2 image of 70.00 MiB... Formatting '/gnu/store/n5qq8ikb0m2k7zpl5k7pln4xn7aqd2an-qemu-image', fmt=qcow2 size=73400320 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16 Warning: vlan 0 is not connected to host network [ 0.000000] Linux version 4.12.5-gnu (nixbld@) (gcc version 5.4.0 (GCC) ) #1 SMP 1 [ 0.000000] Command line: console=ttyS0 --load=/gnu/store/wl49ivrcx7lwdi7zn29fa4jz0sy5s27g-linux-vm-loader [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffddfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffde000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: last_pfn = 0xffde max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] found SMP MP-table at [mem 0x000f6a90-0x000f6a9f] mapped at [ffff8ffe400f6a90] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x0fa5f000-0x0ffcffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F68A0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000000FFE154E 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000000FFE142A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000000FFE0040 0013EA (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000000FFE0000 000040 [ 0.000000] ACPI: APIC 0x000000000FFE149E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000000FFE1516 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000000ffddfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x0ffda000-0x0ffddfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:ffd6001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 143092943 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000001000-0x000000000ffddfff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000ffddfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffddfff] [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff8ffe4f800000 s118936 r8192 d32616 u2097152 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr f80d980 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64359 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=ttyS0 --load=/gnu/store/wl49ivrcx7lwdi7zn29fa4jz0sy5s27g-linux-vm-loader [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Memory: 232816K/261616K available (8776K kernel code, 1480K rwdata, 3640K rodata, 1700K init, 1156K bss, 28800K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 35796 entries in 140 pages [ 0.004000] Hierarchical RCU implementation. [ 0.004000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.004000] NR_IRQS:16640 nr_irqs:256 16 [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [ttyS0] enabled [ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.004006] tsc: Detected 3392.294 MHz processor [ 0.004351] Calibrating delay loop (skipped) preset value.. 6784.58 BogoMIPS (lpj=13569176) [ 0.004587] pid_max: default: 32768 minimum: 301 [ 0.004916] ACPI: Core revision 20170303 [ 0.005704] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.006165] Security Framework initialized [ 0.006473] Yama: becoming mindful. [ 0.006726] AppArmor: AppArmor initialized [ 0.007042] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.007574] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008134] Mount-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.008598] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.009273] CPU: Physical Processor ID: 0 [ 0.009577] mce: CPU supports 10 MCE banks [ 0.009888] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.010260] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.016098] Freeing SMP alternatives memory: 32K [ 0.017371] smpboot: Max logical packages: 1 [ 0.017806] x2apic enabled [ 0.018133] Switched APIC routing to physical x2apic. [ 0.019074] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) [ 0.020000] Performance Events: PMU not available due to virtualization, using software events only. [ 0.020000] smp: Bringing up secondary CPUs ... [ 0.020000] smp: Brought up 1 node, 1 CPU [ 0.020000] smpboot: Total of 1 processors activated (6784.58 BogoMIPS) [ 0.020000] sched_clock: Marking stable (16000000, 0)->(79655420, -63655420) [ 0.127655] devtmpfs: initialized [ 0.127986] x86/mm: Memory block size: 128MB [ 0.129544] evm: security.selinux [ 0.129829] evm: security.SMACK64 [ 0.130095] evm: security.SMACK64EXEC [ 0.130384] evm: security.SMACK64TRANSMUTE [ 0.130703] evm: security.SMACK64MMAP [ 0.130991] evm: security.ima [ 0.131226] evm: security.capability [ 0.131564] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.132327] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.132828] pinctrl core: initialized pinctrl subsystem [ 0.133334] RTC time: 18:49:23, date: 08/10/17 [ 0.133749] NET: Registered protocol family 16 [ 0.134201] cpuidle: using governor ladder [ 0.134525] cpuidle: using governor menu [ 0.134833] PCCT header not found. [ 0.135119] ACPI: bus type PCI registered [ 0.135438] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.136012] PCI: Using configuration type 1 for base access [ 0.137088] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.137723] ACPI: Added _OSI(Module Device) [ 0.138068] ACPI: Added _OSI(Processor Device) [ 0.138415] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.138783] ACPI: Added _OSI(Processor Aggregator Device) [ 0.140287] ACPI: Interpreter enabled [ 0.140607] ACPI: (supports S0 S3 S4 S5) [ 0.140918] ACPI: Using IOAPIC for interrupt routing [ 0.141317] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.143732] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.144257] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.144797] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.145309] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.146372] acpiphp: Slot [3] registered [ 0.146696] acpiphp: Slot [4] registered [ 0.147019] acpiphp: Slot [5] registered [ 0.147340] acpiphp: Slot [6] registered [ 0.147663] acpiphp: Slot [7] registered [ 0.147983] acpiphp: Slot [8] registered [ 0.148309] acpiphp: Slot [9] registered [ 0.148628] acpiphp: Slot [10] registered [ 0.148956] acpiphp: Slot [11] registered [ 0.149286] acpiphp: Slot [12] registered [ 0.149615] acpiphp: Slot [13] registered [ 0.150073] acpiphp: Slot [14] registered [ 0.150403] acpiphp: Slot [15] registered [ 0.150729] acpiphp: Slot [16] registered [ 0.151058] acpiphp: Slot [17] registered [ 0.151387] acpiphp: Slot [18] registered [ 0.151719] acpiphp: Slot [19] registered [ 0.152056] acpiphp: Slot [20] registered [ 0.152384] acpiphp: Slot [21] registered [ 0.152712] acpiphp: Slot [22] registered [ 0.153059] acpiphp: Slot [23] registered [ 0.153386] acpiphp: Slot [24] registered [ 0.153727] acpiphp: Slot [25] registered [ 0.154054] acpiphp: Slot [26] registered [ 0.154381] acpiphp: Slot [27] registered [ 0.154710] acpiphp: Slot [28] registered [ 0.155037] acpiphp: Slot [29] registered [ 0.155363] acpiphp: Slot [30] registered [ 0.155691] acpiphp: Slot [31] registered [ 0.156019] PCI host bridge to bus 0000:00 [ 0.156343] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.156869] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.157397] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.157979] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window] [ 0.158555] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.163643] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.164245] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.164756] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.165304] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.166226] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.166803] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.227223] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.231180] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.231684] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.232190] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.232662] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.233153] ACPI: Enabled 2 GPEs in block 00 to 0F [ 0.233637] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.234115] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.234772] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.235531] vgaarb: loaded [ 0.235873] SCSI subsystem initialized [ 0.236234] ACPI: bus type USB registered [ 0.236566] usbcore: registered new interface driver usbfs [ 0.236997] usbcore: registered new interface driver hub [ 0.237419] usbcore: registered new device driver usb [ 0.237867] EDAC MC: Ver: 3.0.0 [ 0.238272] PCI: Using ACPI for IRQ routing [ 0.238760] NetLabel: Initializing [ 0.239036] NetLabel: domain hash size = 128 [ 0.239380] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.239836] NetLabel: unlabeled traffic allowed by default [ 0.240344] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.240903] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.241286] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.244832] clocksource: Switched to clocksource kvm-clock [ 0.251177] VFS: Disk quotas dquot_6.6.0 [ 0.251571] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.252155] AppArmor: AppArmor Filesystem Enabled [ 0.252563] pnp: PnP ACPI init [ 0.253157] pnp: PnP ACPI: found 6 devices [ 0.258776] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.259544] NET: Registered protocol family 2 [ 0.260000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.260554] TCP bind hash table entries: 2048 (order: 3, 32768 bytes) [ 0.261069] TCP: Hash tables configured (established 2048 bind 2048) [ 0.261579] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.262044] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.262550] NET: Registered protocol family 1 [ 0.262899] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.263364] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.263825] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.264325] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.265049] Trying to unpack rootfs image as initramfs... [ 0.330164] Freeing initrd memory: 5572K [ 0.330611] Scanning for low memory corruption every 60 seconds [ 0.331270] audit: initializing netlink subsys (disabled) [ 0.331945] Initialise system trusted keyrings [ 0.332326] audit: type=2000 audit(1502390963.871:1): state=initialized audit_enabled=0 res=1 [ 0.333055] workingset: timestamp_bits=40 max_order=16 bucket_order=0 [ 0.334149] zbud: loaded [ 0.334722] Allocating IMA blacklist keyring. [ 0.335647] Key type asymmetric registered [ 0.335976] Asymmetric key parser 'x509' registered [ 0.336362] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.336972] io scheduler noop registered [ 0.337282] io scheduler deadline registered (default) [ 0.337705] io scheduler cfq registered [ 0.338122] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.338700] ACPI: Power Button [PWRF] [ 0.339063] GHES: HEST is not enabled! [ 0.339410] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.361674] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.363239] Linux agpgart interface v0.103 [ 0.364932] brd: module loaded [ 0.365939] loop: module loaded [ 0.366942] scsi host0: ata_piix [ 0.367255] scsi host1: ata_piix [ 0.367534] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14 [ 0.368057] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15 [ 0.368796] libphy: Fixed MDIO Bus: probed [ 0.369151] tun: Universal TUN/TAP device driver, 1.6 [ 0.369576] PPP generic driver version 2.4.2 [ 0.369947] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.370463] ehci-pci: EHCI PCI platform driver [ 0.370823] ehci-platform: EHCI generic platform driver [ 0.371234] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.371713] ohci-pci: OHCI PCI platform driver [ 0.372068] ohci-platform: OHCI generic platform driver [ 0.372482] uhci_hcd: USB Universal Host Controller Interface driver [ 0.373192] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.374321] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.374718] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.375178] mousedev: PS/2 mouse device common for all mice [ 0.375795] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.376757] rtc_cmos 00:00: RTC can wake from S4 [ 0.377309] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.377894] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 0.378474] i2c /dev entries driver [ 0.378784] device-mapper: uevent: version 1.0.3 [ 0.379182] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: address@hidden [ 0.379842] ledtrig-cpu: registered to indicate activity on CPUs [ 0.380485] NET: Registered protocol family 10 [ 0.380990] Segment Routing with IPv6 [ 0.381306] NET: Registered protocol family 17 [ 0.381668] Key type dns_resolver registered [ 0.382116] registered taskstats version 1 [ 0.382446] Loading compiled-in X.509 certificates [ 0.382832] zswap: loaded using pool lzo/zbud [ 0.389142] Key type big_key registered [ 0.389526] Key type trusted registered [ 0.389895] Key type encrypted registered [ 0.390212] AppArmor: AppArmor sha1 policy hashing enabled [ 0.390648] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.391160] evm: HMAC attrs: 0x1 [ 0.391674] Magic number: 13:460:847 [ 0.392086] rtc_cmos 00:00: setting system clock to 2017-08-10 18:49:23 UTC (1502390963) [ 0.392773] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.393279] EDD information not available. [ 0.533311] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.534111] ata2.00: configured for MWDMA2 [ 0.534817] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.545198] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.545751] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.546442] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 0.548098] Freeing unused kernel memory: 1700K [ 0.548473] Write protecting the kernel read-only data: 14336k [ 0.549183] Freeing unused kernel memory: 1448K [ 0.550237] Freeing unused kernel memory: 456K GC Warning: pthread_getattr_np or pthread_attr_getstack failed for main thread GC Warning: Couldn't read /proc/stat Welcome, this is GNU's early boot Guile. Use '--repl' for an initrd REPL. loading kernel modules... [ 0.605286] usbcore: registered new interface driver usb-storage [ 0.607220] usbcore: registered new interface driver uas [ 0.608927] hidraw: raw HID events driver (C) Jiri Kosina [ 0.609815] usbcore: registered new interface driver usbhid [ 0.610272] usbhid: USB HID core driver [ 0.623471] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 0.639261] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.654898] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [ 0.670324] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.686121] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.693229] FS-Cache: Loaded [ 0.695201] 9pnet: Installing 9P2000 support [ 0.696011] 9p: Installing v9fs 9p2000 file system support [ 0.696475] FS-Cache: Netfs '9p' registered for caching configuring QEMU networking... loading '/gnu/store/wl49ivrcx7lwdi7zn29fa4jz0sy5s27g-linux-vm-loader'... [ 0.715618] random: fast init done environment variable `PATH' set to `/gnu/store/k9hgvkklhzg09x0g2g96f8s971311jca-qemu-minimal-2.9.0/bin:/gnu/store/ylqnd6l728g7ynmnbcfw2r1xy3dj700z-parted-3.2/sbin:/gnu/store/dhpzd7c68dwkslwp70zx30qgr0xq4cqa-e2fsprogs-1.43.4/bin:/gnu/store/dhpzd7c68dwkslwp70zx30qgr0xq4cqa-e2fsprogs-1.43.4/sbin:/gnu/store/qm1dq0jr7xqq2rb2dyk4n2x36rm78nf4-dosfstools-4.1/sbin:/gnu/store/513czksd18aylw1f2vbxzj1ahjx82bld-sed-4.4/bin:/gnu/store/n5yaniyzzlyrz8vhkps0vlnrq3scphny-grep-3.0/bin:/gnu/store/lvx0kpa1jdbq2b4wkk1gbyiw6zrhigqz-coreutils-8.26/bin:/gnu/store/6rixzhgy873s914wg71vpndjyn0fzmck-findutils-4.6.0/bin:/gnu/store/qayvxpllx5kblql9spjgjzvfwr9fda3p-gawk-4.1.4/bin' creating partition table with 2 partitions (20.0 MiB, 40.0 MiB)... Warning: The resulting partition is not properly aligned for best performance. creating ext4 partition... mke2fs 1.43.4 (31-Jan-2017) ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/vda1 is mounted. Creating filesystem with 20480 1k blocks and 5136 inodes Filesystem UUID: d161c5b4-d9ce-428a-9a1f-de97fe5a67dc Superblock backups stored on blocks: 8193 Allocating group tables: done Writing inode tables: done Creating journal (1024 blocks): done Writing superblocks and filesystem accounting information: done [ 0.825601] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) populating... clearing file timestamps... creating FAT partition... mkfs.fat 4.1 (2017-01-24) mounting root partition... [ 0.849975] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) installing bootloader... Installing for i386-pc platform. [ 1.356874] tsc: Refined TSC clocksource calibration: 3392.239 MHz [ 1.357376] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5aacbefe, max_idle_ns: 440795229191 ns Installation finished. No error reported. mounting EFI system partition... creating EFI firmware image...[ 1.688661] random: crng init done done. [ 2.044604] Unregister pv shared memory for cpu 0 [ 2.045201] reboot: Restarting system [ 2.045488] reboot: machine restart @ build-succeeded /gnu/store/b7q3n5cv9jm84rr5nfj6x726m34z929z-qemu-image.drv - @ build-started /gnu/store/0h6dy5lsa0qq640sy24ysvbnd62i0gk0-run-vm.sh.drv - x86_64-linux /var/log/guix/drvs/0h//6dy5lsa0qq640sy24ysvbnd62i0gk0-run-vm.sh.drv.bz2 @ build-succeeded /gnu/store/0h6dy5lsa0qq640sy24ysvbnd62i0gk0-run-vm.sh.drv - @ build-started /gnu/store/9cwg1i8czpcpiqq9b28kmz6vrmrgf437-rsync-test.drv - x86_64-linux /var/log/guix/drvs/9c//wg1i8czpcpiqq9b28kmz6vrmrgf437-rsync-test.drv.bz2 Warning: vlan 0 is not connected to host network [ 0.000000] Linux version 4.12.5-gnu (nixbld@) (gcc version 5.4.0 (GCC) ) #1 SMP 1 [ 0.000000] Command line: console=ttyS0 --root=/dev/vda1 --system=/gnu/store/xg2rbcgvhf90cd33959s7505chlnh7v0-system --load=/gnu/store/xg2rbcgvhf90cd33959s7505chlnh7v0-system/boot [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffddfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffde000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: last_pfn = 0xffde max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] found SMP MP-table at [mem 0x000f6a90-0x000f6a9f] mapped at [ffff8f6b000f6a90] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x0f94d000-0x0ffcffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F68A0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000000FFE154E 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000000FFE142A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000000FFE0040 0013EA (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000000FFE0000 000040 [ 0.000000] ACPI: APIC 0x000000000FFE149E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000000FFE1516 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000000ffddfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x0ffda000-0x0ffddfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:ffd6001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 143355467 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000001000-0x000000000ffddfff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000ffddfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffddfff] [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff8f6b0f600000 s118936 r8192 d32616 u2097152 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr f60d980 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64359 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=ttyS0 --root=/dev/vda1 --system=/gnu/store/xg2rbcgvhf90cd33959s7505chlnh7v0-system --load=/gnu/store/xg2rbcgvhf90cd33959s7505chlnh7v0-system/boot [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Memory: 231720K/261616K available (8776K kernel code, 1480K rwdata, 3640K rodata, 1700K init, 1156K bss, 29896K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 35796 entries in 140 pages [ 0.004000] Hierarchical RCU implementation. [ 0.004000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.004000] NR_IRQS:16640 nr_irqs:256 16 [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [ttyS0] enabled [ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.004008] tsc: Detected 3392.294 MHz processor [ 0.004356] Calibrating delay loop (skipped) preset value.. 6784.58 BogoMIPS (lpj=13569176) [ 0.004704] pid_max: default: 32768 minimum: 301 [ 0.005074] ACPI: Core revision 20170303 [ 0.005927] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.006473] Security Framework initialized [ 0.006789] Yama: becoming mindful. [ 0.007068] AppArmor: AppArmor initialized [ 0.007438] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.008067] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008815] Mount-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.009338] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.010060] CPU: Physical Processor ID: 0 [ 0.010400] mce: CPU supports 10 MCE banks [ 0.010751] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.011153] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.017342] Freeing SMP alternatives memory: 32K [ 0.018692] smpboot: Max logical packages: 1 [ 0.019141] x2apic enabled [ 0.019486] Switched APIC routing to physical x2apic. [ 0.020541] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) [ 0.024000] Performance Events: PMU not available due to virtualization, using software events only. [ 0.024000] smp: Bringing up secondary CPUs ... [ 0.024000] smp: Brought up 1 node, 1 CPU [ 0.024000] smpboot: Total of 1 processors activated (6784.58 BogoMIPS) [ 0.024000] sched_clock: Marking stable (20000000, 0)->(89118140, -69118140) [ 0.132027] devtmpfs: initialized [ 0.132336] x86/mm: Memory block size: 128MB [ 0.133923] evm: security.selinux [ 0.134196] evm: security.SMACK64 [ 0.134465] evm: security.SMACK64EXEC [ 0.134761] evm: security.SMACK64TRANSMUTE [ 0.135090] evm: security.SMACK64MMAP [ 0.135386] evm: security.ima [ 0.135627] evm: security.capability [ 0.135976] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.136680] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.137136] pinctrl core: initialized pinctrl subsystem [ 0.137613] RTC time: 18:49:26, date: 08/10/17 [ 0.138011] NET: Registered protocol family 16 [ 0.138414] cpuidle: using governor ladder [ 0.138705] cpuidle: using governor menu [ 0.138969] PCCT header not found. [ 0.139241] ACPI: bus type PCI registered [ 0.139560] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.140094] PCI: Using configuration type 1 for base access [ 0.141166] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.141817] ACPI: Added _OSI(Module Device) [ 0.142164] ACPI: Added _OSI(Processor Device) [ 0.142524] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.142916] ACPI: Added _OSI(Processor Aggregator Device) [ 0.144475] ACPI: Interpreter enabled [ 0.144803] ACPI: (supports S0 S3 S4 S5) [ 0.145125] ACPI: Using IOAPIC for interrupt routing [ 0.145555] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.148071] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.148613] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.149203] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.149761] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.150896] acpiphp: Slot [3] registered [ 0.151251] acpiphp: Slot [4] registered [ 0.151605] acpiphp: Slot [5] registered [ 0.151939] acpiphp: Slot [6] registered [ 0.152284] acpiphp: Slot [7] registered [ 0.152619] acpiphp: Slot [8] registered [ 0.152971] acpiphp: Slot [9] registered [ 0.153306] acpiphp: Slot [10] registered [ 0.153654] acpiphp: Slot [11] registered [ 0.154116] acpiphp: Slot [12] registered [ 0.154460] acpiphp: Slot [13] registered [ 0.154826] acpiphp: Slot [14] registered [ 0.155161] acpiphp: Slot [15] registered [ 0.155500] acpiphp: Slot [16] registered [ 0.155849] acpiphp: Slot [17] registered [ 0.156198] acpiphp: Slot [18] registered [ 0.156539] acpiphp: Slot [19] registered [ 0.156911] acpiphp: Slot [20] registered [ 0.157261] acpiphp: Slot [21] registered [ 0.157610] acpiphp: Slot [22] registered [ 0.157955] acpiphp: Slot [23] registered [ 0.158304] acpiphp: Slot [24] registered [ 0.158652] acpiphp: Slot [25] registered [ 0.159001] acpiphp: Slot [26] registered [ 0.159351] acpiphp: Slot [27] registered [ 0.159696] acpiphp: Slot [28] registered [ 0.160052] acpiphp: Slot [29] registered [ 0.160400] acpiphp: Slot [30] registered [ 0.160763] acpiphp: Slot [31] registered [ 0.161109] PCI host bridge to bus 0000:00 [ 0.161453] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.162014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.162579] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.163203] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window] [ 0.163820] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.169339] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.169944] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.170472] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.171032] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.171913] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.172436] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.237219] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.237768] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.238278] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.238821] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.239315] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.239840] ACPI: Enabled 2 GPEs in block 00 to 0F [ 0.240357] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.240876] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.241554] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.242009] vgaarb: loaded [ 0.242371] SCSI subsystem initialized [ 0.242747] ACPI: bus type USB registered [ 0.243106] usbcore: registered new interface driver usbfs [ 0.243550] usbcore: registered new interface driver hub [ 0.243987] usbcore: registered new device driver usb [ 0.244431] EDAC MC: Ver: 3.0.0 [ 0.244855] PCI: Using ACPI for IRQ routing [ 0.245352] NetLabel: Initializing [ 0.245636] NetLabel: domain hash size = 128 [ 0.245988] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.246457] NetLabel: unlabeled traffic allowed by default [ 0.246975] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.247542] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.247934] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.252510] clocksource: Switched to clocksource kvm-clock [ 0.259236] VFS: Disk quotas dquot_6.6.0 [ 0.259627] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.260246] AppArmor: AppArmor Filesystem Enabled [ 0.260704] pnp: PnP ACPI init [ 0.261309] pnp: PnP ACPI: found 6 devices [ 0.266931] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.267694] NET: Registered protocol family 2 [ 0.268162] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.268737] TCP bind hash table entries: 2048 (order: 3, 32768 bytes) [ 0.269201] TCP: Hash tables configured (established 2048 bind 2048) [ 0.269666] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.270082] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.270546] NET: Registered protocol family 1 [ 0.270868] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.271296] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.271727] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.272193] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.272981] Trying to unpack rootfs image as initramfs... [ 0.349382] Freeing initrd memory: 6668K [ 0.349888] Scanning for low memory corruption every 60 seconds [ 0.350564] audit: initializing netlink subsys (disabled) [ 0.351247] Initialise system trusted keyrings [ 0.351639] audit: type=2000 audit(1502390966.783:1): state=initialized audit_enabled=0 res=1 [ 0.352337] workingset: timestamp_bits=40 max_order=16 bucket_order=0 [ 0.353460] zbud: loaded [ 0.354029] Allocating IMA blacklist keyring. [ 0.354943] Key type asymmetric registered [ 0.355291] Asymmetric key parser 'x509' registered [ 0.355689] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.356288] io scheduler noop registered [ 0.356634] io scheduler deadline registered (default) [ 0.357068] io scheduler cfq registered [ 0.357510] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.358109] ACPI: Power Button [PWRF] [ 0.358482] GHES: HEST is not enabled! [ 0.358869] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.381451] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.383038] Linux agpgart interface v0.103 [ 0.384745] brd: module loaded [ 0.385721] loop: module loaded [ 0.386704] scsi host0: ata_piix [ 0.387024] scsi host1: ata_piix [ 0.387310] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14 [ 0.387854] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15 [ 0.388627] libphy: Fixed MDIO Bus: probed [ 0.388974] tun: Universal TUN/TAP device driver, 1.6 [ 0.389403] PPP generic driver version 2.4.2 [ 0.389789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.390324] ehci-pci: EHCI PCI platform driver [ 0.390692] ehci-platform: EHCI generic platform driver [ 0.391117] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.391612] ohci-pci: OHCI PCI platform driver [ 0.391974] ohci-platform: OHCI generic platform driver [ 0.392395] uhci_hcd: USB Universal Host Controller Interface driver [ 0.393135] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.394273] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.394684] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.395150] mousedev: PS/2 mouse device common for all mice [ 0.395781] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.396749] rtc_cmos 00:00: RTC can wake from S4 [ 0.397299] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.397892] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 0.398515] i2c /dev entries driver [ 0.398828] device-mapper: uevent: version 1.0.3 [ 0.399234] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: address@hidden [ 0.399918] ledtrig-cpu: registered to indicate activity on CPUs [ 0.400571] NET: Registered protocol family 10 [ 0.401084] Segment Routing with IPv6 [ 0.401407] NET: Registered protocol family 17 [ 0.401769] Key type dns_resolver registered [ 0.402229] registered taskstats version 1 [ 0.402561] Loading compiled-in X.509 certificates [ 0.402948] zswap: loaded using pool lzo/zbud [ 0.409254] Key type big_key registered [ 0.409649] Key type trusted registered [ 0.410005] Key type encrypted registered [ 0.410330] AppArmor: AppArmor sha1 policy hashing enabled [ 0.410781] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.411292] evm: HMAC attrs: 0x1 [ 0.411818] Magic number: 13:460:847 [ 0.412213] rtc_cmos 00:00: setting system clock to 2017-08-10 18:49:26 UTC (1502390966) [ 0.412928] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.413412] EDD information not available. [ 0.553040] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.553846] ata2.00: configured for MWDMA2 [ 0.554499] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.564915] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.565469] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.566167] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 0.567843] Freeing unused kernel memory: 1700K [ 0.568220] Write protecting the kernel read-only data: 14336k [ 0.568942] Freeing unused kernel memory: 1448K [ 0.569985] Freeing unused kernel memory: 456K GC Warning: pthread_getattr_np or pthread_attr_getstack failed for main thread GC Warning: Couldn't read /proc/stat Welcome, this is GNU's early boot Guile. Use '--repl' for an initrd REPL. loading kernel modules... [ 0.624792] usbcore: registered new interface driver usb-storage [ 0.626859] usbcore: registered new interface driver uas [ 0.628352] hidraw: raw HID events driver (C) Jiri Kosina [ 0.629229] usbcore: registered new interface driver usbhid [ 0.629719] usbhid: USB HID core driver [ 0.643264] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 0.659267] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.674844] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [ 0.690444] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.706165] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.710302] vda: vda1 vda2 [ 0.724599] FS-Cache: Loaded [ 0.726538] 9pnet: Installing 9P2000 support [ 0.727300] 9p: Installing v9fs 9p2000 file system support [ 0.727785] FS-Cache: Netfs '9p' registered for caching [ 0.731608] fuse init (API version 7.26) [ 0.732952] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null) loading '/gnu/store/xg2rbcgvhf90cd33959s7505chlnh7v0-system/boot'... mak[ 0.758510] random: fast init done ing '/gnu/store/xg2rbcgvhf90cd33959s7505chlnh7v0-system' the current system... setting up setuid programs in '/run/setuid-programs'... populating /etc from /gnu/store/wy25fv5rqxq7d2gijny7hyj9njalnjj8-etc... adding user 'root'... adding group 'root'... adding group 'wheel'... adding group 'users'... adding group 'nogroup'... adding group 'tty'... adding group 'dialout'... adding group 'kmem'... adding group 'input'... adding group 'video'... adding group 'audio'... adding group 'netdev'... adding group 'lp'... adding group 'disk'... [ 1.312742] random: crng init done adding group 'floppy'... [ 1.356560] tsc: Refined TSC clocksource calibration: 3392.240 MHz [ 1.357133] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5ac8c3ca, max_idle_ns: 440795369930 ns adding group 'cdrom'... adding group 'tape'... adding group 'kvm'... adding group 'guixbuild'... adding group 'rsyncd'... usermod: no changes adding user 'alice'... adding user 'nobody'... adding user 'guixbuilder01'... adding user 'guixbuilder02'... adding user 'guixbuilder03'... adding user 'guixbuilder04'... adding user 'guixbuilder05'... adding user 'guixbuilder06'... adding user 'guixbuilder07'... adding user 'guixbuilder08'... adding user 'guixbuilder09'... adding user 'guixbuilder10'... adding user 'rsyncd'... registering public key '/gnu/store/br4692l4qzbs4qi7b05gm5q41dgv5rvl-guix-0.13.0-5.228a398/share/guix/hydra.gnu.org.pub'... Service root has been started. starting services... Service root-file-system has been started. Service user-file-systems has been started. Service file-system-/dev/pts has been started. Service file-system-/dev/shm has been started. Service file-system-/sys/fs/cgroup has been started. Service file-system-/sys/fs/cgroup/cpuset has been started. Service file-system-/sys/fs/cgroup/cpu has been started. Service file-system-/sys/fs/cgroup/cpuacct has been started. Service file-system-/sys/fs/cgroup/memory has been started. Service file-system-/sys/fs/cgroup/devices has been started. Service file-system-/sys/fs/cgroup/freezer has been started. Service file-system-/sys/fs/cgroup/blkio has been started. Service file-system-/sys/fs/cgroup/perf_event has been started. Service file-system-/sys/fs/cgroup/hugetlb has been started. Service file-systems has been started. Service user-processes has been started. Service host-name has been started. Service user-homes could not be started. waiting for udevd... [ 3.937639] udevd[294]: starting version 3.2.1 [ 3.989689] udevd[294]: starting eudev-3.2.1 [ 4.437389] udevd[294]: no sender credentials received, message ignored [ 4.470724] parport_pc 00:04: reported by Plug and Play ACPI [ 4.472370] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.477197] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 [ 4.484321] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 4.493224] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 [ 4.494069] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4 [ 4.495487] Floppy drive(s): fd0 is 2.88M AMI BIOS [ 4.512841] FDC 0 is a S82078B [ 4.514233] Error: Driver 'pcspkr' is already registered, aborting... [ 4.655815] ppdev: user-space parallel port driver Service udev has been started. nscd: 318 monitoring file `/etc/hosts` (1) nscd: 318 monitoring directory `/etc` (2) nscd: 318 monitoring file `/etc/resolv.conf` (3) nscd: 318 monitoring directory `/etc` (2) nscd: 318 monitoring file `/etc/services` (4) nscd: 318 monitoring directory `/etc` (2) Service nscd has been started. Service guix-daemon has been started. Service urandom-seed has been started. Service syslogd has been started. Service loopback has been started. Service term-tty6 has been started. Service term-tty5 has been started. Service term-tty4 has been started. Service term-tty3 has been started. Service term-tty2 has been started. Service term-tty1 has been started. unicode_start skipped on not a tty Service console-font-tty1 has been started. Service console-font-tty2 has been started. Service console-font-tty3 has been started. Service console-font-tty4 has been started. Service console-font-tty5 has been started. Service console-font-tty6 has been started. failed to create pid file /var/run/rsyncd.pid: Permission denied Service rsync could not be started. Service networking has been started. Service marionette has been started. failed to create pid file /var/run/rsyncd.pid: Permission denied shepherd: Service rsync could not be started. rsync: failed to connect to localhost (127.0.0.1): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(125) [sender=3.1.2] rsync: failed to connect to localhost (127.0.0.1): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(125) [Receiver=3.1.2] ice-9/eval.scm:387:11: In procedure eval: ice-9/eval.scm:387:11: In procedure open-file: No such file or directory: "/tmp/output" QEMU runs as PID 5 connected to QEMU's monitor read QEMU monitor prompt connected to guest REPL %%%% Starting test rsync (Writing full log to "rsync.log") marionette is ready /gnu/store/bd5d1fvym8vf0gg40w27r5gx1c1d2y9w-rsync-test-builder:1: FAIL PID file /gnu/store/bd5d1fvym8vf0gg40w27r5gx1c1d2y9w-rsync-test-builder:1: FAIL Test file copied to share /gnu/store/bd5d1fvym8vf0gg40w27r5gx1c1d2y9w-rsync-test-builder:1: FAIL Test file correctly received from share # of expected passes 1 # of unexpected failures 3 note: keeping build directory `/tmp/guix-build-rsync-test.drv-1' builder for `/gnu/store/9cwg1i8czpcpiqq9b28kmz6vrmrgf437-rsync-test.drv' failed with exit code 1 @ build-failed /gnu/store/9cwg1i8czpcpiqq9b28kmz6vrmrgf437-rsync-test.drv - 1 builder for `/gnu/store/9cwg1i8czpcpiqq9b28kmz6vrmrgf437-rsync-test.drv' failed with exit code 1 TOTAL: 1 FAIL: /gnu/store/jzg2zwsbjxvc4vy5nqgvwmgx5jacjw1s-rsync-test make: *** [Makefile:5218: check-system] Error 1