When I use (title 'device) instead of (title 'label), it works again, I don't understand the reason.
https://github.com/tumashu/guixsd-helper
At 2017-01-14 19:00:35, "David Craven" <address@hidden> wrote:
>Hi!
>
>> ------------------------
>> [ 12.079023] [drm] Initialized radeon 2.48.0 20080528 for 0000:01:00.0 on
>> minor 0
>> [ 13.253525] input: HDA Intel MID Mic as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
>> [ 13.253746] input: HDA Intel MID Headphone as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
>> [ 13.253983] input: HDA ATI HDMI HDMI/DP,pcm=3 as
>> /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
>> [ 13.326750] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>> [ 13.327259] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8b20000, irq=19
>> [ 13.446723] ath9k 0000:44:00.0 wlo1: renamed from wlan0
>> **Get stuck at this point.....**
>> -------------------------
>
>These are generated by the kernel. There must be some stacktrace or
>errors from guixsd missing somewhere, maybe when running guix system
>reconfigure?
>
>I don't see how an error in the guixsd configuration or a bug in
>guixsd would cause the kernel to hang during boot, before entering the
>initrd.
>
>The recommended way of adding file-systems to an operating-system
>definition according to the guix manual is:
>
>(file-systems (cons* fs-root fs-home fs-backup1 fs-backup2 %base-file-systems))
>
>Can you verify that the working setup kernel is the same one as the
>non working setup kernel?
>
>Possibly a relevant commit is 37203715805335131d18ac05ecb0367f222cd065.
>
>HTH!
>
>David